Having problems with your Kenmore 15522 Built-in Dishwasher ?

Dishwash wont start control was changed it worked for 10 min and stopped again


Answers :

Sorry to read about your problem, I hope this helps you out.

you must have had another problem, i suggest you can a service company, and stop throwing parts at the machine. you will save money in the long run..

I tried to help you. Please help me and Rate/Vote on my response, thanks and good luck
Repair Help & Product Troubleshooting for Kenmore 15522 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Dishwash wont start control was changed it worked for 10 min and stopped again


Sorry to read about your problem, I hope this helps you out.you must have had another problem, i suggest you can a service company, and stop throwing parts at the machine. you will save money in the long run..I tried to help y ... Kenmore 15522 Built-in Dishwasher

I have the Bosch SGS43A2GB27 Dishwasher. Today suddenly it has stopped working. 1st problem i faced was that water was coming out from the dishwasher. Then i cleaned the filters . Then i restarted the dishwasher again. Now the problem i am facing is that the dishwasher is not workign. Whatever cycle i put....the time remains the same. If i put econoy wash...nad time is for 40 min. It stays for 40 min even after 20 min. Please help . I recently called a technician...culd not afford technician aga


... Dishwashers

Re:dishwasher My dishwasher was working perfect. Now, everytime the cycle is done, the detergent door is open but the detergent is sitting right there. I was using the electrosol gel pack which was working great. Now, the gel pack is sitting there when i open it. On the bottom is of the dishwasher is a lot of sand-like particles. I clean this out everytime. I haven't changed anything and am wondering why, all of a sudden, it stopped working. I've had this less than a year. Thanks.


Ginga, first of all it's still under warranty so I would call for service. Here's a few things to consider; first, I would switch back to the powdered detergent like Cascade. You want to make sure that the water entering the dishwasher is at least 12 ... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher

I have a Bosh Logic dishwasher SGS65L12GB/04 The other day it got to 1 min left and would not stop pumping out water and continued even with the door open. After 5 mins playing around it started working again for a further 2 washes. Now when switched on the pump for pumping out the water works continuously. Reset it time seem to count down but does not do anything reset time goes to 0 and beeps but still the pump runs even with the door open. all buttons seem to work fine but no washing and pu


Hi Jonathan,\015\012\015\012Welcome to FixYa.\015\012\015\012Your float may have got stuck or it's possible that you have water leaking into the bottom of the washer. In the bottom of the wash compartment, next to the drain yo ... Bosch Dishwashers

My Delonghi Dishwasher keeps turning off. The dishwasher is turned on at the power point. The water is turned on. Okay When I press the POWER botton on the front it wont stay on. I have to keep my finger on the POWER button and then press the START button for washer to work. If I do this it will then pump out any water in the bottom and start to work. ***BUT when you take your finger of the POWER button the washer just turns off and stops working. Do you have any idea what could be the problem p


Yes, the power button is faulty. by pressing the power button forcefully, you are in effect allowing the contacts to close. Replace it. ... Dishwashers

I have a ge profile quietpower 7 dishwasher. its built in.cannot find manuel and cannot find the serial number anywhere on the dishwasher..i need either your help with serial number or help with why water will not go into the dishwasher. motor runs water decided it wont go in. one day worked perfect and next day stopped working.


Hi\015\012\015\012This is often caused due to the fill valve. You can ... GE Dishwashers

Brandt dishwasher my dishwasher has stopped working AGAIN!!! everytime i call a repair man out they say the temperature re-set needs doing and they fiddle about under the machine, its a built in dishwasher so they take the plinth out underneath, have a fiddle and hey presto it works but i am sick of paying 65 quid for the privilege, i hv asked them what to do but they obviously wont tell me, can you help???


The lights on my dishwasher are working but It doesn't do anything when I hit start. ... Dishwashers

I have an inglis ipu5846 built in dishwasher it fills thaen trys to start but wont start or drain now i took off the lower spray armthe part that is screw down under it tryed cancel drain and it worked put thetop bacck on but not the spray arm and it wont work.what stopping that from working there are not any moving parts on that piece


... Whirlpool Dishwashers

I have a diplomat hja 8630 integrated dishwasher and it has stopped working. When I turn it on all the program lights stay on, including the 'play' light and the dishwasher wont work no matter what I do. Hope someone can help


... Dishwashers

I have F&P DD603 with problem with bottom draw. Once a programme is selected and door is closed, the dishwasher beeps three times then tries to start itys cycle. It then starts but stops every 1-2 minutes (like pause botton has been pressed). If you press start again it starts for 1-2 mins then stops again. I have tried turning off the power and totally cleaned out the dishwasher but no change? Any suggestions?


Hi \015\012When you pull out the drawer, pay attention to the bottom near the bottom front panel, you will see a little tab. this tab is at both sides of the drawer, press these tabs in and pull the drawer fur ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Does GU3200XTS Dishwasher have a reset. Our dishwasher stopped about 45 mins left in cycle, we have replaced fuse but dishwasher does not work.


... Whirlpool 24 in. GU3200XTPS Stainless Steel Built-in Dishwasher

My dishwasher candy futura CDF 312 stops to work and there is water inside the machine when i turn the short program - the water is off after 30 min working


... Dishwashers

New SHE4AM16UC, professionally installed eight months ago. Worked fine with very light usage until now. Dishwasher starts normally but stops and signals "clean" after less than five minutes on any cycle. One inch of water in bottom that (I think) drains when a new cycle starts. Soap tablets are not ejected from compartment. Bosch authorized repairman says he now has two client dishwashers with identical symptoms and is asking Bosch support for ideas (he's changed pump, control unit, and float sw


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If the clean light flashes, pauses, and then repeats.\015\012When the dishwasher doesn't sense a water t ... Bosch SHE4AM16UC 24 in. Built-in Dishwasher

GE GLD6360L15SS. Dishwasher stopped mid cycle and the Start / Reset button is flashing. The washer will not restart. Tried unplugging for 1 min and flipping breaker for 1 min. No change.


... GE 24 in. GLD6360LSS Stainless Steel Built-in Dishwasher

Obtained this haier hdp18pa portable dishwasher, thought I would give it a try. The unit will not fill with water, turn the power on you can hear the motor or the pump running but no water comes in. THe 4 display lights flash and beep a series of times and then stop only to repeat the sound off in a every few second sequence. I have tried the remedies offered online, tilting the unit does not seem to work for me on this one. I changed out the water inlet valve but nothing changed and I got the s


HiYou need to clean the filter that is in the tube that gets water in the dishwasherin case you can not find it pls ask me to send you a diagram ... Haier HDP18PA Stainless Steel Free-Standing Dishwasher

Dishwasher stopped cleaning but appears to run through cycles. Possibly water starved. The bottom "sprayer has some water coming through the holes but is not spinning, (although spins freely by hand). The top and middle "sprayers" definately aren't functioning. Stopped working suddenly, (not a gradual change).


HI. I agree with your assessment. There may be some sort of blockage within the hose assembly. I recommend to inspect all hoses that correspond to the actual recirculation pump. Check the drain hoses as well. ... KitchenAid 24 in. KUDI01ILBS Stainless Steel Built-in Dishwasher

Dishwasher suddenly stopped working. doesn't do anything when you push the buttons. the lights don't come on. It's as if there's no power but nothing has changed in the kitchen. everything else works fine.,


... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Shu9925uc/14 bosch dishwasher leaves standing water in the bottom of the pump. The pump seems to be bad because it wont drain out the back hose. I have run the diswasher full cycle and put the drain hose into the sink to test. It wont drain at all now and I dont hear the pump. Perhaps unrelated: Pump seemed to stop working after the back hose disconnected itself from the back of the unit spilling water all over the floor. When I reconnected the unit to the wall the pump now seems to be disfunct


Hi Dishwasher not draining issue occurs due to kinked drain pipe, clogged drain filter or drain pump. Check the drain hose for any visible clogging, remove if present. If no visible lint is present then remove then turn off the dish ... Bosch SHU9925UC Built-in Dishwasher

My smeg dwi 710 dishwasher keeps flashing on the diplay panel and won't change to another wash selection. it wont close and wont start. the light is stuck on the heaviest wash selection and just keeps flashing on and off and on and off. i have tried turning it off, keeping buttons held down and nothing seems to work. there is nothing in the manual that says what the flashing means so i dont know how to fix it.


... Smeg Dishwashers

My Diplomat HJA 8630 dishwasher has stopped working. Put cycle on machine filled with water then no power and can not drain dishwasher. Fuse checked and changed, so not mains power supply. Any suggestions??


... Dishwashers

Dishwasher runs for appx 14 min & stops washing half way thru wash cycle. Timer contunies to run. No drain pump out (nothing). Let dishwasher set idle for appx 1 hour and it will re-set. Set timer forward to end of wash cycle and it will complete rinse and final rinse. Then go to dry. Timer works ok.


This sounds like something is stuck in the drain pump. You can remove the inner cover to look for obstructions. You have a dual purpose motor it does the both circulating and draining. The blockage is causing it to overheat and trip the thermal prote ... Whirlpool DU840CWD Dishwasher

I have a linea dishwasher model LDW 3SS i think it is about 3 years old , it used to start but not complete the cycle just stop halfway and then would only work if you slammed the door or pushed front of machine and now it wont work at all ???


Even though this is an old issue, I thought it would be good to close out.\015\012\015\012I had the same issue where the dishwasher would stop at two certain point in the program. If I'd manually advance past that point, it would keep goi ... Dishwashers

Fisher & Paykel dishwasher beeping with red light indicator. Won't stop unless unplugged. Doesn't work, (won't drain when it did work), can't change cycle. Have not used it in a long time due to problems


Try pulling out the bottom drawer and check to see if there is a puddle of water around the circuit board, if so it will make it do a lot of wierd things. ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

I have a Fisher & Paykel DW60CDX1 and it stopped working mid wash. It beeped and showed E1. It now wont reset or work at all and there is water in the bottom of the dishwasher that has not drained


... Dishwashers

Dishwasher wont stop working


You will have to check if the dishwasher pump is constantly running . If the only way you can stop is by turning off the power supply, the float switch has tripped. This means ther is either water collected at the base of the dishwasher due to a leak ... Baumatic 23 in. BDW13 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2481 seconds