Having problems with your Kenmore 15529 Built-in Dishwasher ?

Door will not latch - Kenmore 15529 Built-in Dishwasher


Answers :

Either the lock is faulty or the program is midway .
\012You will need to inspect the lock mechanism, use a good degreasing spray if the lock is struck. If not the lock reset from end of cycle is not reset.
\012Must check this out.
Repair Help & Product Troubleshooting for Kenmore 15529 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I just bought this house with this dishwasher built in. I have pushed the door shut, pressed the heat dry button to lock the door and pressed the start button. Nothing happens. Now I can't even get the lights on front to turn off. The lock button flashes as though the door is open, but its not as far as I can tell. I have to press the latch in to open the door. I'd like to use it... any ideas. Its a Kenmore Elite model # 665 17052 402. Thank You


... Kenmore 24 in. 17052 / 17054 / 17059 Built-in Dishwasher

Latch on door when close light stay on - Kenmore 15522 Built-in Dishwasher


... Kenmore 15522 Built-in Dishwasher

Door will not latch - Kenmore 15529 Built-in Dishwasher


Either the lock is faulty or the program is midway .\012You will need to inspect the lock mechanism, use a good degreasing spray if the lock is struck. If not the lock reset from end of cycle is not reset.\012Must check this out. ... Kenmore 15529 Built-in Dishwasher

Kenmore dishwasher I have a kenmore dishwasher and in the middle of a cycle all my front panel lights went off. I have checked the power going into the dishwasher it is fine. I also checked the door latch it is fine. Not sure what else to check? Same exact problem model number 665.15934 We have had nothing but problems with all of our sears products - highly suggest to SHOP SOME WHERE ELSE before you get stuck too.


Check the continuity of the thermal fuse (part # 8193762). It's clipped onto the electronic control inside the console.Let me know if you need more help. ... Kenmore Dishwashers

Remove door vent on kenmore elite dishwasher - Kenmore 15129 Built-in Dishwasher


... Kenmore 15129 Built-in Dishwasher

Kenmore dishwasher door won't latch - Kenmore Dishwashers


... Kenmore Dishwashers

I have a hotpoint HDA2000G00WW built in dishwasher. The dishwasher does not run unless you press the plastic door under the latch area. I have adjusted the latch and that does not resolve the problem. I notice that the top three screws that hold the plastic eschucion are no longer holding as the plastic screw areas have broken on the eschucion. Do I need to replace the eschucion or can it be tightened some other way?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Hotpoint built in dishwasher door will not latch..?


... Dishwashers

Kenmore Dishwasher... Soap dispenser door hard to latch


... Kenmore Dishwashers

I have a 7 year old Kenmore 24" (mod. 16532201) built-in dishwasher. For the past several months now I have noticed a dark almost greasy film covering the inside of the dishwasher after doing a load of dishes. It can also be found around the soap dispenser door, basically everywhere. I'm wondering if the black rubber around the inside front of the dishwasher is deteriorating. It doesn't appear to be damaged or cracked. I have tried "Finish" dishwashing cleaner several times, but to no avail


There are several items apart from the door seal in the dishwasher that comes in contact with the wash water that circulates inside the dishwasher.\015\012\015\012One will have to eliminate one by one - the most likely cause is the washer ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

Kenmore elite dishwasher door will not latch


... Kenmore Dishwashers

My kenmore 24" built in leaks from the top of the door. The door looks good. I am thinking the latch may not be pulling it tight as it should.


You can adjust that latch with a screwdriver. just take a close look at it and loosen the screws to adjust it ... Kenmore 24 in. 15079 Built-in Dishwasher

Braun dishwasher door latch sticky - Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher


... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Replace dishwasher door balance link - Kenmore 24 in. 16492 / 16494 / 16499 Built-in Dishwasher


... Kenmore 24 in. 16492 / 16494 / 16499 Built-in Dishwasher

Door latch on dishwasher stuck - Siemens 24 in. SE55A560 Built-in Dishwasher


... Siemens 24 in. SE55A560 Built-in Dishwasher

Dishwasher door latch stuck. wont open - KitchenAid KUDM03FT 24 in. Built-in Dishwasher


... KitchenAid KUDM03FT 24 in. Built-in Dishwasher

Kenmore elite dishwasher stopped in middle of cycle with water still inside. Checked breaker. Replace the hole control panel, door latch from a used kenmore elite. Work for half a cycle and quit with water still inside just like the first time.


Here's your solution (free PDF) - Kenmore Elite Dishwasher Manual ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

Door latch wont hold door closed - KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher


Complain complain complain to Kitchenaid. They know this is a design flaw and should recall this product! Kitchenaid used to be high end. ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Maytag built in dishwasher quiet series 200. Door closed and latch won't release to open door.


Insert flat head screwdriver in side of handle and pry out or use dinner knife(butter knife) ... Dishwashers

Need deco door panels size for kenmore 16059 - Kenmore 24 in. 16059 Built-in Dishwasher


Check out www.applianceart.com. They have different sizes and options for your dishwasher ... Kenmore 24 in. 16059 Built-in Dishwasher

How to spring on the dishwasher door - Kenmore 24 in. 16693 Built-in Dishwasher


... Kenmore 24 in. 16693 Built-in Dishwasher

I have a 2006 Kenmore Elite built in dishwasher and the start light works but when I close the door the dishwasher does not start.


Check the door switch continuity and power contactor or the electronic or mechanical timer. ... Kenmore Dishwashers

Dishwasher leaking out front door - Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher


Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101 ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Is there a filter in Kenmore Dishwashers that need rinsing or changing? Our dishwasher seems to be backing up, leaving "silt" on the dishes. I empty the screen on the door, but residue has built up elsewhere.


Water flow problems are what cause streaks, silt or cloudy dishes. The water flow problems can be caused by several things:1. Clogged spray arm holes (Clean wash arms) 2. Sump inlets that are blocked with debris or plastic (Clean inlets) ... Dishwashers

Need to find door handle latch for kenmore dishwasher 154355101


THAT IS WRONG MODEL NUMBER THERE IS MORE NUMBERS..When you get correct model go to searspartsdirect.com and you can order yourself. ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2123 seconds