Having problems with your Kenmore 15762 Dishwasher ?

Lock light stays on

\015 I held the button forever "air Dry" then goes of and comes back on. I can hold down the cancel button and then the far left button together and normal and light wash light up. Continue to hold and then they flash. No matter what sequence I use I get the same result. I can also push and hold pot pan wash and start the cancel button flashing When I hold it together I get the same result. No mater what lock light comes back on.\015

Answers :

It sounds like the circuit bontrol board is cracked or shorted, which means it must be replaced.
Repair Help & Product Troubleshooting for Kenmore 15762 Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Lock Control I don't have a manual for my dishwasher. The Lock button is on (top of dishwasher). I have pushed that top button for 3 seconds. The button on the top and the "L" then both blink. The button on the top then stays on and the "L" light goes off. Since I can't get the lock light to go off - - my dishwasher won't tun on. Thank you very much.


First try unplugging the washer from powerpoint for 30secs..this may disable lock.if not, some washers will still work on lock if you hold the buttons you need. for 5seconds. eg try starting washer as normal but hold the button for 5secs....(Ps you m ... Jenn-Air 24 in. JDB1050AW Free-standing Dishwasher

The key lock light stays on. I held the heated dry button for 4 seconds and the light still stays on. I think it may be the control board, but I am not sure. Can anyone help me please?


If the light is blinking, it is definately a stuck button and the console will need to be replaced. If it is on steady, it could be a console or control board problem. There are no troubleshooting tips to figure out which one is faulty, the manual sa ... Whirlpool GU2400XTP Built-in Dishwasher

I have a magtag quiet 100 series that has a broken handle but still shuts tight and seems to lock yet. Problem seems to be that the rinse only light will stay on for quite a long time and won't let me hit the wash button. When the rinse only light does go off, if I hit the wash button it starts but then switches to rinse only. Sometimes I can get lucky and get it to stay on wash after the rinse button is off for some time. Any suggestions?


... Maytag 24 in. DWD1500A Built-in Dishwasher

The lock on light wont go off. We can not start the dishwasher. We have tried holding the noheat option for several seconds and have turned off the circuit box for several minutes and neither one made the lock on light stay off.


That is the correct button to push to turn the control lock off. You can try to reset the control by removing power for two minutes. If the dishwasher is doing the same thing, most likely the touch pad has a shorted button or a bad connection on the ... Kenmore Dishwashers

Have whirlpool gold dishwasher made in Mexico, the control lock light stays on, when i push it and hold it just blinks three times and then stays on steady and then does the same over and over, before it did this I noticed the lights for different cycles flashing randomly, and even pushing cancel button once in a while would start the machine up....I have tried to unplug the machine and then plug back in, but nothing is helping....any ideas??


... Whirlpool Dishwashers

DU943PWKSO DISHWASHER STOPPED WORKING, ELECTRICAL CURRENT TO PANEL...THE LOCK LIGHT COMES ON WHEN THE DOOR IS CLOSED AND LATCHED, BUT THE WASHER WON'T START WHEN ANY OF THE BUTTONS ARE PUSHED...THE LOCKED LIGHT JUST BLINKS A FEW TIMES AND THEN STAYS SOLID AGAIN. ANYTHING I CAN TRY?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. This issue can be either due to a faulty door latch or\015\012door lock switch which is not engaging its ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

The doorlock light has been staying on for about a week although the dishwasher would still work. Now it will not do anything and the Lock on light is staying on except when the door is open. can you nhelp me. Thank you, Steve


1. Press the Heated Dry pad for three seconds.2. An indicator light next to the lock graphic willilluminate when the controls are locked.To Cancel:1. Press the Heated Dry pad for three seconds.  ... Dishwashers

The control lock light goes on as soon as I press the cycle to start the dishwasher. The dishwasher does not start, presumably because the control lock stays on. I do not know how to disable the control lock function. Pushing and holding the button for 3 seconds does not disable it.


Hello &\015\012Welcome to FixYa\015\012\015\012To unlock the\015\012controls press and hold the HEATED DRY button for 20seconds. If the problme\015\012returns then only option is touch pad replacement. Please get back t ... Maytag Dishwasher

Lock light stays on


It sounds like the circuit bontrol board is cracked or shorted, which means it must be replaced. ... Kenmore 15762 Dishwasher

Light on the lock stays on no other light will turn on dishwasher will not function.


Following is a complete trouble shooting process. Take what applies to you. I'd say the door interlock or float valve are most probable. Start with the simple things and work your way from there. You will be\015\012amazed how many people ... Whirlpool 24 in. DU1148XTP Built-in Dishwasher

I have a maytag quiet series 100 dishwasher and it will not run a lock light comes on and i have replace a broken handle assembly but light stays on


The control panel is locked. dont know your model number to tell you what buttons you hold to unlock it, but some models have a lock button you hold down for 3-5 seconds. other models just have a lock light, and have a line indicating 2 buttons that ... Dishwashers

My Kitchenaid dishwasher kudr25shbt1 will turn on by itself. The child lock light stays lit along with the cancel light and can cannot be turned off by pushing the energy saver button. The machine will not operate in this condition.What part has failed .


No question about it, the electronic board needs to be replaced. Often the capacitors break down and create problems like you are experiencing. ... KitchenAid 24 in. KUDR25SH Built-in Dishwasher

I have a kenmore ultra dishwasher 655.177779990 and the lock out light was flashing until I unplugged all connectors and plugged back in. Now light stays on and everything else has stopped working. Tried to reset but no luck what can I do to reset dishwasher?


Hello & Welcome to FixYa\015\012\015\012\015\012You\015\012are right, the unit needs a reset. To reset the control you can press and hold\015\012the AIR DRY/RINSE ONLY button for 15second ... Dishwashers

Kitchenaid KUDS25SH KitchenAid dishwasher Child Lock light flashing. Followed instructions for turning it off. Hold Energy Saver Dry button for 4 seconds. Light stays flashing. Dishwasher won't work. Cancel doesn't effect it.


Hold the button down until it beeps and the light goes off. Eric ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

Our Kitchenaid dishwasher model # KUDP021R will not start. We close door, select wash and press start. The control lock light at the top which is lit flashes a few times and then stays lit. Dishwasher remains silent. An aside which may be helpful is that the door has always seemed to be not quite straight...as though it had to warp a tiny bit to close and lock.


The problem you have already identified could be the door switch is not closing when you shut the door. Please confirm your dishwasher is KUDP02I (i and not 1).\015\012\015\012One way to check is find out the door switch on the door panel ... KitchenAid Dishwashers

My dishwasher 'start" button won't kick in. The machine seems to think it isn't locked - light wont activate, but the door IS locked. I select the cycle and option, but when i push start, it won't stay, The "clean" button keeps flashing. This is 5 years old


Hi,How many Blinks are there?Is it 7 Clean Light Blinks?Let me know, so that we could proceed.Hope i helped you.Thanks for using ' Fixya ' and have a nice day!! ... Kenmore 24 in. 17032 Built-in Dishwasher

Lock light stays on


First of all, we checked here and no one had an answer. So, we called the sears repair service and got to talk with a tech. They had the usual, already been tried answers but, out of frustration finally said to "pull the plug" and wait a minute. ... Dishwashers

Lock on light stays on even after pushing and holding the no heat dry button for 4 secs it doesn't start filling model 665-15817


Hi.Try tripping the circuit breaker or unplugging power cord to reset the appliance.If you cannot get rid of the message, parts inside the appliance must be tested.Test the door lock first, that is probably the cau ... Kenmore Dishwashers

Whirlpool dishwasher lock light stays on i can not unlock it


... Whirlpool DU1055XTS Built-in Dishwasher

The 'lock light' stays on my frigidaire gallery dishwasher, purchased summer 2009. The dishwasher is not responding to any pushing of keypad???


... Frigidaire FDB1502RGC Built-in Dishwasher

Lock light stays on. Cannot use dishwasher? - Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher


HiThanks for using FixYa. To turn off the lock press and hold the Heated Dry button for 10-15 seconds. If this does not help the unfortunately you’ll have to replace the ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

GE Nautilus power scrubber model #gsc4008f00ww dishwasher. the cycle light stays on and the machine continues to beep when the door is locked. the wash cycle is done. i have tryed to reset it but the same thing keeps happening.


... GE Dishwashers

The lock light stays on ,dishwasher will do nothing!


The child lock is on look for instructions on the control or the inner door to unlock ... Dishwashers

How to reset dishwasher maytag MDB9601AWB? Tried depressing the button for 3-5 seconds the way the manual says - no good. "Lock" light just stays on. Tried unplugging. No good. Tried circuit breaker. No good.


Let the breaker sit off for an hour, if that does not work it needs help ... Maytag Jetclean III MDB9601AWW / MDB9601AWB Built-in Dishwasher

The air lock light will stay on when shutting the door on my kenmore dishwasher and it will not run


... Kenmore 15522 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0875 seconds