Having problems with your Kenmore 15899 Built-in Dishwasher ?

No power/not responding

\015 We just had it repaired a couple of months ago for a blown wire. The wires seem fine. But it didn't complete it's last rinse cycle and I can get no power from it now. Nothing lights up and I get no response out of it. Any ideas. I really don't want to have to pay for another repair job. I could buy another one for the cost of two repair trips.\015\012\015\012Thanks!\015

Answers :

Check your breaker first. If your breaker is fine , then remove inner door panel by taking out screws. Next remove cover from control panel, and replace control panel fuse. Write down the make and model # of your dishwasher, then go to appliance store buy new fuse. Then you will know what it looks like. Then you will be able to replace the one in the control panel. Afterwards seal control panel cover with silicone, and reassemble. that should fix your problem, but if not we would be more than happy to assist you further.
Repair Help & Product Troubleshooting for Kenmore 15899 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Countdown display is flashing saying 2:10 but dishwasher does not respond to pushing any of the buttons (light stays on Power Scrub and does not respond to selecting other wash cycles). On'Off button works but none of the other buttons responds. Machine does not begin washing when door is closed


... Bosch SHE6AP0 Builtin Dishwasher

My Beko MW5104 is frozen and does not respond to any settings. It is permanently on at spin/end with the green light on. I can switch it on and off. I have unplugged it from the mains and switched it off and then replugged it 24 hours later but to no avail. It is empty of water just not switching off completely or responding to any other button


See this causes and fix it. God bless you\012 \012 \012 \012 \012 Thermal Fuse\012 \012 \012 \012 \012 \012 \012 \012 \012 ... Dishwashers

Ge dishwasher pdw8890 display shows time remaining 106 and will not start or respond to any buttons. I turned the power off and on but it still shows time remaining 106 and will not respond.


... GE Profile PDW8400J Built-in Dishwasher

Kenmore dishwasher #665.16952000 Appliance will not respond to keys on electronic console. "Quick Rinse" button is flashing and no other buttons respond. I am assuming there is a reset sequence to push. Would like to know the sequence prior to paying for a repairperson to come out and charge me to do the same thing. Any info?


HiThanks for using FixYa. If the light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (light flashes, all bu ... Kenmore Dishwashers

I have an older GE dishwasher, model GSD1200T02. I recently put in the wrong soap, so I had to press the clear/reset button. When I did this, the dishwasher ignored me and seemed to continue through the cycles anyway. When it got half way between "drying" and "off", it stopped, and has been that way for several days now. It will not respond to any button pushes at all now. I cannot even reset it because it does not respond at all when I press the clear/reset button. I have had a load of di


This is only a long shot, try turning the breaker off and on again, may be ???\015\012 Jacques. ... Dishwashers

Model 8573025-after being away for several months, I tried to run the dishwasher, and the lights started flashing, and it wouldn't start. Now it doesn't respond at all when I press the "normal wash" or "heavy duty wash" buttons, they will flash, but no other buttons respond at all.


When dishwashers get used after a long gap the seals dry out and start leaking or it could be moisture inside the switches. \015\012\015\012I will need the make and full model number of your dishwasher. Is it a Kitchen Aid? better to give ... Dishwashers

My Frigidaire Dishwasher FDBB2040FC0 has stopped responding. None of the buttons on the front work or respond at all. What could be causing this, and are their some simple solutions I can try?


... Frigidaire Dishwashers

I have a kenmore dishwasher ultra wash model # 665.17777990. start botton does not respond but cancel botton respond with draining....


... Bosch Dishwashers

No electricity Went to use the dishwasher yesterday, but when I pushed the normal wash button nothing happened. Discovered that none of the buttons respond and no lights come on to indicate they are responding.


I would check to ensure you have power to the dishwasher and that the door is closing/secure properly.\015\012\015\012(i.e, Plugged-in properly under sink/back or washer, check for tripped circuit-breaker, and door latch ... Maytag 24 in. MDB6100A Built-in Dishwasher

Frigidaire Dishwasher model # FDB520RHB2 Stopped prematurely last night while on light cycle, now will not respond at all. Noticed water at bottom of tub; tried draining manually through drain tube, removed lower arm, glass trap, and filter, and water remains; tried electronic reset by switching off breaker for several minutes; all to no avail. Electronic controls (cycle/option select) will not respond at all.


This is not a uncommon problem and it sometime's is the pc control panel but i find that it is more often the interlock ( latch assembly .) i would change // there has been a improvment and i belive this will solv ... Dishwashers

Zanussi zdt5052, not responding; is on, but no program buttons respond.


... Zanussi 18 in. ZDT5052 Slim-Line Built-in Dishwasher

My Bosch SHE98M will not respond to pushing the Cleartouch buttons. It is just stuck displaying the normal wash. It will not respond to pressing any of the touchpads. When the door is closed it displays "not started". I have powered the unit down by switching it off at the supply, then restoring power but there is no change. It appears as if the cleartouch panel is no longer sensitive to touch?


... Bosch Evolution 800 SHE98M05UC Stainless Steel Dishwasher

The controls on my GE GLD4600N10WW have on occasion locked up. In the past, I have resolved this by turning the breaker off and back on. It has now locked up, but won't reset. When the breaker is turned back on, the dishwasher control panel lights indicate "Normal Wash" and "Heated Dry" but the controls do not respond. After several minutes the lights simply go dark. It does not respond to any button pushing.


... Dishwashers

The touch panel on my dishwasher model EIDW6405G T has gone black and does not respond to finger touch to reset. I tried to unlock it but it is unresponsive. It closes and latches but will not respond to and touch control.


... Electrolux Dishwashers

Dishwasher won't start and start button doesn't light, but other buttons respond


I think you still have warranty, it sounds you have faulty control panel, even if it's new does not mean it is good. ... Kenmore Dishwashers

Start Button Doesn't Respond


Hi, i think the control panel board is kind of faulty in the sense that it is having a partial contact problem with needs to be fixed by merely servicing the control panel board immediately before it affects the remaining buttons. So you need t ... Dishwashers

Not responding to commands


Here are your partsReplacement parts for WHIRLPOOL GU1500XTLS2 | AppliancePartsPros.comHere is a tech shee ... Whirlpool Dishwashers

Dishwasher Cycle light glowing and pad not responding


... KitchenAid Dishwashers

Kenmore elite 13109 blinking lights wont respond to Normal Wash/Heated Dry


... Kenmore Dishwashers

GE Profile PDW9200 My control panel is not responding


... GE Profile PDW8400J Built-in Dishwasher

Push the buttons but doesn't respond


Sounds like a fuse iside the dishwashers consol.access the consol area and ohm out the fuse.what is your model number? ... Dishwashers

Buttons not responding


On my hotpoint with the lcd screen I took the lcd section out and apart and the pad was sitting slightly out from the contact points so I cleaned it up and fixed back together and could not believe that it was that simple! it worked perfectly and has ... Dishwashers

Whirlpool dishwasher Model # DU943PWKQ0 not responding


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

HOW DO I RESPOND TO YOU


Just type on the text box below & the click POST ... Dishwashers

The dry button is lit, no other buttons will respond to touch.


Try to unplug unit for 30 min if this doesnt reser then change the module/control board.let me know what you think ... Maytag 24 in. DWU9902 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0178 seconds