Having problems with your Kenmore 16372 / 16374 / 16379 Built-in Dishwasher ?

My kenmore 16379 makes a grinding noise once the water has heated. What could this be? And, how do I take apart the area that needs to be cleaned?


Answers :

Repair Help & Product Troubleshooting for Kenmore 16372 / 16374 / 16379 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My kenmore 16379 makes a grinding noise once the water has heated. What could this be? And, how do I take apart the area that needs to be cleaned?


... Kenmore 16372 / 16374 / 16379 Built-in Dishwasher

My dishwasher was not getting the dishes clean, so i started taking the lower end apart to clean, got to a gray wheel looking object with a screw in the top which was recessed and still the wheel looking object will not come off, it will spin but will not come off, I need to finish taking it off because I dropped a screw down in the bottom area where the water settles.


If there is still standing water in the bottom of the dishwasher, remove it with a wet vac then look for the missing screw. It might be in the vac.\015\012\015\012If no luck, try using a good small stick magnet to retrieve the screw. The ... Maytag 24 in. MDB4000 Built-in Dishwasher

I have a dishwasher that hasn't been draining properly. For a while I could hit cancel drain cycle again and it would clear 1/2-1 of water out. But now that doesn't always do it. Someone told me to take filter out and see if it needs to be cleaned. Otherwise we have no other sink/plumbing problems with other kitchen areas. Please help! one handyman told me no use to work on dishwashers they are just throwaway with parts/service being so expensive.


The advise you recieved is correct. You will need to pull the unit out of the cabinet and disconnect the drain hose from the rear. Then remove the cover, There is a filter inside. If its clean then its time for a replacement unit. You could have a ... Whirlpool Dishwashers

Ld-1416T I have an LG LD-1416T dishwasher and the lower spray arm does not turn. The top arm turns and the top rack is washed well. I pulled everyting out and cleaned all the filters (which weren't that dirty) but still no luck. I could only get so much stuff out to clean before it looked like to go any further, I would need to gain access through the bottom. Are there more filters in the motor area which might need cleaning? I read that it could be the vario motor. Can I test this? and if s


If you have one spray bar working then there is enough pressure. There is only one pump. So you should check the spray bar to see if it is plugged. Also check the seals to see if they are bad. ... LG Dishwashers

THE SOAP RARELY CLEANS COMPLETELY OUT AND SOMETIMES THE DISHES ARE LEFT DIRTY. I HAVE ELIMINATED; 1) INCOMPLETE CYCLE. AND 2) NOT USING FRESH DETERGENT. I'M THINKING THAT IT MIGHT HAVE SOMETHING TO DO WITH THE SOAP DOOR/LATCH LINKAGE. IN ORDER TO TAKE CARE OF THIS NEED TO TAKE THE DOOR APART. I JUST NEED TO KNOW IF I'M HEADED IN THE RIGHT DIRECTION, OR IF THERE'S SOMETHING ELSE I NEED TO CONSIDER.


Hi, Just to make a suggestion before you tear into the soap dispenser, Have you tried using a liquid detergent made for dishwashers instead of the powder? If not, try this to see if this takes care of the problem. It couldn't hurt. Keep me posted. ... Dishwashers

Making a noise and not cleaning very well Can i take apart the dishwasher and clean it and make sure that the drain is not clogged?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Does not get my dishes clean, leaving a film on my glasses, not getting food off. tried to take apart to clean but could not figure out how to get bottom filter out with the large water bracket going up the back of the dishwasher to the top water bar. I bought as a store model, no instruction booklet. How do I clean out bottom filter?


The problem is hard water. www.dishwasherfilter.com has a product to solve this problem once and for all. It filters the water going into your dishwasher and removes the ... Jenn-Air 24 in. JDB1100AW Built-in Dishwasher

I have a Maytag dishwasher, Model MDB4100. Are there directions for removing the cleaning equipment in the bottom of the dishwasher? I do have the manual and there are no instructions to do this. I am getting scummy buildup around the drain and suspect it needs a good thorough cleaning that I can't do without taking it apart. I have tried to clean away the "gook" but it reappears after a few washes and I can't reach the back. Thank you, Cara


... Maytag 24 in. MDB4100 Built-in Dishwasher

I have had this dishwasher for almost 4 years. It used to do a great job but last few months it has been doing a really poor job. Leaving food on dishes and also a film on them. I have taken everything apart and cleaned it good. I have tried different detergents, ran several diswasher cleaners in the machine. Even ran vinager in it because thats what i do for my coffee pot when it needs cleaning and it works great. We have very hard water here so I thought that could be the problem. Its frustrat


... Frigidaire GLD2445RF Built-in Dishwasher

We have Kenmore that is 7 years old. It is one of these models : 665.11072912; 665.11072913; 665.11072914: 665.11072922; 665.11072929. The dishwasher is making a very very loud sound, taking very long to run and is not cleaing dishes. Water is coming out and draining. Water is very hot. Could the filter be blocked and if so how do we access it to take a look and clean it out Candace


... Kenmore Dishwashers

Whirlpool dishwasher Quiet Partner II DU1100XTPQ7 Mine runs but will not drain. Took it apart and cleaned out as much as I could around the trap, but could not figure out how to pull out the sump and seal. I believe it may be clogged but need to know how to pull it out or possibly reset it so it will drain.


I have a simular problem but everything quit working even the lights. Is there a reset button. Ive checked to make sure there is power supplied to the dishwaher. Please help. ... Dishwashers

I have a Miele 24 in. G638 Plus Free-standing Dishwasher which is leaking into the pan underneath the machine (and triggering the polystyrene float switch) I am almost certain that the leak is coming from the main pump seal. Is it feasible to replace the seal (it looks like a major job to take the pump assembly apart). I guess Miele labor charges would make the repair not worthwhile Is there a service manual for this machine. I guess I would need it


Hi\015\012\015\012Please check the bellow link to have a detailed view regarding your query…..\015\012http://www.appliance-r ... Miele 24 in. G638 Plus Free-standing Dishwasher

My dishwasher is making a grinding sound when draining and i believe there could be something caught in the impeller, which is also stopping the water from draining completely. I took apart the pieces and 4 torque head screws but i believe there is one more screw to take out...which i cannot find? I have a Kenmore Elite Dishwasher turbo ultrawash model 665.7793k701


\012\012Its sounds like you are trying to take out the drain pump to clear the impeller of broken glass ect... Make sure your taking out he ... Kenmore Dishwashers

My boys are helping now but they don't rinse off plates first. Now the dishwasher is acting like it's not cleaning very well. I'll take the dishes that have stuff on them still and soak them and then put them back into the dishwasher. Are we filling it to full, I make sure the uper rack is clear on the bottome of it for the water jets to work. I was thinking about running some vinager through it. would that help with maybe some cloged areas


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

The start button flashing continuously and the filter area seems to be full of water but when I take it out it is perfectly clean. I have switched the machine on and off several times but each time the start button indicates a fault. I have tried holding down the on button so as to stop the start button flashing so that I could select a program - this did work once and I selected my program but 10 mins in it stopped and started beeping... I have a ADG7460 machine - HELP! I'm going crazy!


Please clarify what you mean by "..but when I take it out it is perfectly clean.." are you saying the water in the filter area is clean. \015\012\015\012Turn the power off and take out all the water by hand using a small container. Turn t ... Whirlpool Dishwashers

When my Kenmore 665 dishwasher is done with the cycle, the glasses on the outer areas of the top rack have stuff stuck to them. Almost like the jet spray is clogged and spraying the garbage. My "repairman" has taken apart and cleaned everything he could. The problem was solved for a few washes, but then the particles continued to come back. Any suggestion>


... Kenmore 15129 Built-in Dishwasher

My LG dishwasher is working perfectly, but it seems to be making a disturbing grinding sort of noise washing no matter which cycle I use. i frequently clean the filters, and if it needs oil or salt. What could be the problem???? I hope I get a quick reply. thankyou


Knmv;lkbncvgmj ... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I have a three-year-old Sears Kenmore Elite dishwasher. I find that despite the fact that we scrape and rinse our dishes before loading the machine, after each three months of use (two loads a day) or so, I have to take the machine apart (spray tower, racks, bottom impeller, bottom screen housing, food grinder cover) and clean-out the food grinder area, for it fills-up with sludge. The sludge restricts the water flow and there isn't enough flow to turn the impellers via that steering jets.


Have you tried different detergents? Some detergents after getting wet and going through the wash cycle with the debris from the wash turns into a grease substance that grimes up in some dishwashers. Try running the machine with hot water this someti ... Dishwashers

My maytag quiet series fills with water and then starts for 5 seconds then stops. This happens 4 times and then the entire system just stops. To help troubleshoot I used a screw driver to trigger the closed door so that I could leave the door open when the cycle starts and the pumps seems to be working and water sprays all over the place. I also took apart the impellar blade to make sure there was nothing jammed and everything is clean. Maytag MDB7500AWW


... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

I am told the pump is defective and I was wanting to do the repair job myself. I need a manuel to take apart the machine to replace the pump assembly or clean it to see if that will do the trick. Is there a manuel so that I can do this maintance?


Usualy if pumps are difective are not worth repairing.\015\012log on to the manufacturar web site they should have a on line manual that might help you.\015\012good luck ... Frigidaire Dishwashers

Husky 3000 pressure washer, Axial Cam Pump Diagram , need to take apart to clean caked soap out. model# HU80432


... Pressure Washers

My general electric model number pdw8200j03ww dishwasher continually leaves my glasses with small food particles in the inside. i am not sure where i need to ''cleaning'' the diswasher out to get rid of this problem. i am also not sure to take everything apart


... GE Dishwashers

How do take apart the inside lower drain area for cleaning?


Shut off the power to the dishwasher. Remove the strainer under the bottom spray arm. You will need to unscrew the cap, remove arm and clips that hold strainer. Clean well with a brush, soap and water, then replace it. ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Hello, we have a Frigidaire dishwasher Model# FDB1250REC2. There was all kinds of junk down in the lower filter area and when I tried to remove the parts they all came out together and then fell apart. I need to see how the parts go back together, because I thought I had them in there correctly, but when I opened up the dishwasher after running it the water sprayer was laying on the heating element. Could you please help me get it back together right? Thank you


I am having the same problem...were you able to fix it? ... Frigidaire Dishwashers

Whirlpool dishwasher GU2275XTV model started making a noise while washing, I think a piece of plastic is in the drain area but do not know how to take off the washer arm to clean it out?


... Whirlpool Gold GU2275XTV Builtin Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1575 seconds