Having problems with your Kenmore 16529 Built-in Dishwasher ?

Cycles will not automatically change - Kenmore 16529 Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for Kenmore 16529 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Cycles will not automatically change - Kenmore 16529 Built-in Dishwasher


... Kenmore 16529 Built-in Dishwasher

Problem for Kenmore 24 in. 15992 Built-in Dishwasher Previously answered by Ginko but have not had any responses since June 18 and problem not solved. No water flow into dishwasher. Actual model is Kenmore Elite undercounter dishwasher 665.15982990. Float is not stuck. Worked fine for 10 years until mid May. Display shows cycle is on and counting, for all the different cycles. No valve or motor sound when starting cycles, only a single electronic click. When cycle is canceled, motor does s


Hi.Sorry about your old query.If there is no power on black wire and no filling, then check and eventually replace the thermal fuse. The thermal fuse is attached to control board. If it is faulty it will read continuity, norma ... Kenmore 24 in. 15992 Built-in Dishwasher

KENMORE DISHWASHER STUCK IN WASH CYCLE it will not move off of this postion water heats up it cleans but does not move off this cycle. New 2008 Kenmore 1610 built-in dishwasher won't leeave wash cycle. repair person says it is supposed to take 3 hours.


... Dishwashers

My dishwasher so my dishwasher seemed to have quitworking during a cycle. like breaker triped or something. i checked the breaker and thats fine. it seams like its hard wired in though. Would that be right? and is there a fuse or something that could/would blow during a wash? I dont know what model it is or anything it was in the house when i got it. The dishwasher is built in and it seems decently old its a kenmore ultra wash and it has like 10 buttons for the differend cycles on the left and a


Sounds like the fuse on the control blew. you can replace the fuse for\015\012around $20 or you can cut and splice the wires for free. If that doesnt\015\012work then you may have a loose conection in your junction box under the\015\012dishwasher. ... Kenmore 24 in. 15932 Built-in Dishwasher

Changing impeller Kenmore dishwasher - Kenmore 24 in. 15689 Built-in Dishwasher


... Kenmore 24 in. 15689 Built-in Dishwasher

My Kenmore Dishwasher Model # 665.13832K601, wont change from wash cycle to dry cycle. It stays on wash until you stop the cycle and drain the water


... Dishwashers

My Kenmore built-in dishwasher is running its cycles normally, but no water is coming into the machine so it runs the cycles dry (even a rinse cycle). Can you advise? If a part is needed, is it an expensive one? Thank you!!


Sound like the inlet water valve is to blame here - or else the main controller board relay is not telling it to open. Further testing will be necessary to determine which is the cause.If it is the board - you are better off getting a new ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Dishwasher knob won't move - Avanti DW18 Built-in 18 inch wide 8 Place setting Dishwasher, Energy Star rated, 7 Automatic cycles, Stainless Steel interior, Rinse Aid Dispenser, White color


... Avanti DW18 Built-in 18 inch wide 8 Place setting Dishwasher, Energy Star rated, 7 Automatic cycles, Stainless Steel interior, Rinse Aid Dispenser, White color

Maytag dishwasher cant change wash cycle - Maytag 24 in. MDB6657 Built-in Dishwasher


... Maytag 24 in. MDB6657 Built-in Dishwasher

Kenmore elite 17574 won't start wash cycle - Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore 16252402 This dishwasher will not complete the cycles. I have changed the computer board and heat element but the same thing. It will go as far as the dry cycle and stop. Any suggestions other than trash it?


... Kenmore 24 in. 16259 / 16254 / 16252 Built-in Dishwasher

Dishwasher won't drain. (Kenmore 3380957Rev A) It's been not draining that well for a couple of months, but then a couple of weeks ago, it just won't let the last inch of water out. --I can't see in the center area under the plastic to see if something is clogging it. --I tried running it on three different cycles to see if that changed anything (Pots and Pans, Normal, and Water Miser). No difference. It never seems to overflow, but when the cycle is over, it has a couple of inches of


The problem could be the pump, the drain hose or the timer. It will not drain if left to sit. The thing to try first is to put a cup of white vinegar in the machine and let it wash. This may remove sludge or scale blocking the strainer. 2nd take the ... Dishwashers

My dishwasher wont change cycles. - Whirlpool DU1055XTS Built-in Dishwasher


Its might be your heating element or the thermostat check if the heating element get hot if not theres your problem...the machine try to get to sertion temperture and cant do that so it stuck in the same mode...heater # 8572861 coast 20-3 ... Whirlpool DU1055XTS Built-in Dishwasher

Kenmore elite dishwasher 630.1630 will start but once in wash cycle won't change cycles,also top rack not getting water


... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

Is there a filter in Kenmore Dishwashers that need rinsing or changing? Our dishwasher seems to be backing up, leaving "silt" on the dishes. I empty the screen on the door, but residue has built up elsewhere.


Water flow problems are what cause streaks, silt or cloudy dishes. The water flow problems can be caused by several things:1. Clogged spray arm holes (Clean wash arms) 2. Sump inlets that are blocked with debris or plastic (Clean inlets) ... Dishwashers

The dishwasher won't change cycles - GE 24 in. GSD6660GSS Built-in Dishwasher


... GE 24 in. GSD6660GSS Built-in Dishwasher

KENMORE DISHWASHER THE LIGHT IS FLASHING ON THE QUICK RINSE AND THE DISHWASHER WILL NOT CANCEL, CHANGE CYCLES OR DO ANYTHING. IT IS ABOUT 7 YEARS OLD AND WE CAN'T FIND THE USER GUIDE. PLEASE E-MAIL [email protected] or CALL 503-394-2452 AS SOON AS POSSILBE. THANK YOU J.D.REED


... Kenmore Dishwashers

I have the Kenmore Elite double drawer built-in dishwasher purchased 2008. During the wash cycle the drawer pops out just enough to stop the cycle. My question is is there an adjustment somewhere to fix this problem? Thank you Susan


... Dishwashers

My kenmore dishwasher isnt changing cycles just washing over n over. model# 587.15173400 put new heat sensor but still not changing


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

I have a Kenmore Model 665.15955792 dishwasher. Water is leaking out the bottom of the door. I changed the door seal and the defusers but it continued. I took off the front of the door and I see the water filling into the base of the machine. When the dishwasher starts the cleam cycle, water is pushed up into the small square holes in the bottom of the door and then splashes up over the lip of the door and out onto the floor. It has never done this before, just started recently. I have had the d


... Kenmore Dishwashers

Bosch dishwasher change default cycle - Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher


... Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher

My dishwasher is not cleaning dishes - it is running through its cycles, but when it is done, there is a heavy residue of soap and hard water and the dishes looks worse than when i put them in.I've changed dishwashing liquids and even replaced the extra cleaning solution (little hanging basket) with a new one, and still not washing dishes clean. this is a kenmore and is about 5 years old.


Hello there:There are 6 areas that could cause this to happen Please follow these simple steps okInvestigate each of these six areas if your dishwasher is not completely cleaning your dishes:\015\012\015\012 \015\012\015\012\015\01 ... Kenmore 15899 Built-in Dishwasher

The cycle takes too long, almost 2 hours - Kenmore 24 in. 16593 Stainless Steel Built-in Dishwasher


... Kenmore 24 in. 16593 Stainless Steel Built-in Dishwasher

Water in the bottom after a cycle - Kenmore 13719 / 13712 Built-in Dishwasher


... Kenmore 13719 / 13712 Built-in Dishwasher

My dishwasher Kenmore Elite mod 665.16283402 does not clean dishes seems like cycle is running, but everything comes dirty lower impeller moves but two upper ones does not change their position at all all the sprinklers are not plugged, inside no food pieces what possibly could be the problem thanks Greg


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2135 seconds