Having problems with your Kenmore 16602 / 16604 / 16609 Built-in Dishwasher ?
Kenmore Model 587.1514* and cannot find the remaining portion of the Model number
\015 I currently have a Kenmore Model 587.1514*, however, I cannot locate the complete model number on my dishwasher. The sticker that is on the door was apparently torn off by an over zealous kiddo trying to clean the kitchen. The door seal and the spray arm/tower assembly needs to be replaced, however, no body will even try to research the parts with the model number range above.I need these two parts, and the dishwasher will work perfectly, however, I need some help on how I can find the complete model number and/or a location that will help me research the part myself. Are these two parts truely so different from other models in the 587.1514 range?\015
Those are all the numbers you need - the remaining numbers are just the color ie: 587.1514 is the model 587.15142400 means its white
Repair Help & Product Troubleshooting for Kenmore 16602 / 16604 / 16609 Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Kenmore Model 587.1514* and cannot find the remaining portion of the Model number
Those are all the numbers you need - the remaining numbers are just the color ie: 587.1514 is the model 587.15142400 means its white ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher
Dishwasher not rinsing or cleaning properly. It appears to be clogged. Not sure the model number. We cannot even find the model number.
Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Jenn-Air 24 in. JDB1250 Built-in Dishwasher
Where is the model number on a kenmore ultrawash i can't tell u the model number if i cant find it
For the model number, Usualy there is a bottom "Kick plate" held on by two screws on the very BOTTOM of the dishwasher. If there is no visable plate inside or around the door frame check under there. ... Dishwashers
I have a Dishlex Glendale Deluxe and need a new seal for the bottom of the door. I cannot find what model number it is to source the part. Do you know what the part no. or model no. would be?
I have a Dishlex Glendale dishwasher and the model no is 10014380092 if that helps you. ... Dishwashers
Leaking at bottom of front door with suds and water coming out. Cannot find the model number. Seals on door (3 sides) are fine. Cannot see a seal for under the door.
Hi,\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101\012\012dafhrw ... Hotpoint 24 in. HDA3400G Built-in Dishwasher
Hello , My Kennmore Dishwasher is not draining. I cannot find where the drain area is to see if there is a blockage. The model number is 665 157 72990 ( the numbers are worn off a bit and may not be accurate. Thank you.
GO UNDER YOUR SINK FIND THE DRAIN HOSE COMING FROM THE CABINET IT WILL EITHER BE OFF WHITE OR BLACK FOLLOW IT TO THE DRAIN POINT EITHER AIR GAP DISPOSAL OR SEPERATE DRAIN TAKE OFF CLAMP GET A BUCKET AND RUN D/W SEE IF IT DRAINS INTO THE BUCKET THEN Y ... Dishwashers
I have a Kenmore Ultra Wash model 16879. After setting the dishwasher and going to bed I woke up to find the "Quick Rinse" light flashing. I am unable to get the light to stop or washer to work. I tried some of the "code" combinations I saw offered on fixya but I do not have a heated dry button, and cannot find another combo that works. Thank you for any tips you can provide.
1) Crack the door open.2) Within 3 seconds press the \015\012following sequence - Hi Temp Scrub, Energy Saver Dry, Hi Temp Scrub, Energy \015\012Saver Dry3) Close and latch the door4) \015\012Press the cancel button (the circle with ... Dishwashers
I am getting the error U3 coming up with a red light and the cycle stops at that point. I am not sure of the dishdrawer model number and have been through a number of the user manuels but cannot find the answer in them.
From a service manual....U3 #--## Time to fill was tooshort, indicatingwater was still in thetub.Drain pump is blocked.Drain hose is blocked.Sprayarm or rotor notturning freely.Motor electronics h ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher
Can't find an adapter that will fit the hose of my kenmore portable dishwasher model # 17692 (full model # is 66517625692)[
Hi, If you go to www.repairclinic.com they have the part you need. Make sure you enter the model # exactly like this 665.17625692I hope this helps you. Vicplease feel free to rate me response to you so that others as well as myself ... Kenmore 24 in. 17692 Built-in Dishwasher
My bosch dishwasher control panel displays 0H on the time delay. When I start it the OH go to 2H. It then starts running and does not stop. The cycle minutes don't display. It's model number SHU5302UC 14. I do not have a manual and cannot find one online. Thanks
Check to see if your unit has a recall on it because if it does you will get a free control module from bosch.\015\012your problem is the control module. thermador .com is the site to lookup. gaggenau,bosch,thermador they are the same ccompany. ... Bosch 24 in. SHU53 Built-in Dishwasher
I have an SKT51 series (silver edition) Bosch free-standing dishwasher. The problem is that a few days ago, when the washing was over and I started emtpying the dishwasger I found in the dishwasher a grey plastic part with the number 5603000027 on it. Obviously, it got loose from somewhere, but I cannot find where it was. The washing quality since then is definitely lower, food remaining on the dishes, which are not properly dried. What could be wrong?
Hello. The best way to find that part is to get your model number. If you are not sure where to look for it go to this link\015\012\015\012 ... Bosch Dishwashers
How do i find the model number for kenmore dishwasher
Model Number Locator Tips\015\012 1. A zero in the model number might be the letter O.\015\012 2. A lower case L might be a 1.\015\012 3. Some models have 3 digits and a period first, like thi ... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher
I need to winterize the built-in Kenmore dishwasher in a mountain cabin where winter temperatures will drop below freezing. The unit is at least 10-15 years old, but I don't have the model number handy. My approach to the cabin water pipes in general will be to gravity-drain them and then blow out remaining water by adding and releasing air pressure. RV antifreeze will go into all P-traps. When it comes to the dishwasher, my plan is to remove the drain hose from the P-trap and drain it as mu
In order to get the water out the best thing to use is a wet dry shop vac and attch it to the end of the drain hose on either your dishwasher or clothes washer this will remove any water in the drain pumps.As far as RV anti freeze being added not sur ... Kenmore Dishwashers
Have an dishwasher that i need to tilt back to get it finish the cycle.It gets to a certin point in the cycle then stops. i looked it up on the net and this has been a nice temporary solution but I need to figure this one out. Ts a free standing bosch but i cannot find the exact model number anywhere. Can you help.
Go to appliancepros.com to find your model it sounds like the water pump is failing they have a 800 number where they can help you figure out whats wrong and what model it is for sure. hope this helps you. ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher
My dishwasher is making a grinding sound when draining and i believe there could be something caught in the impeller, which is also stopping the water from draining completely. I took apart the pieces and 4 torque head screws but i believe there is one more screw to take out...which i cannot find? I have a Kenmore Elite Dishwasher turbo ultrawash model 665.7793k701
\012\012Its sounds like you are trying to take out the drain pump to clear the impeller of broken glass ect... Make sure your taking out he ... Kenmore Dishwashers
I have a Kenmore dishwasher, model 665.17019401 (serial number FS1002610). It goes through all cycles, drains out water, periodically, and dries the dishesat the end. But, when it ends, there is water at the bottom of the tub, at least 1 quart of water. I have to drain out the remaining water in the dishwasher. What is wrong?
Either the drain or screen is somewhat plugged, or a clog or jam in water pump. Many machines do leave just a little bit of water just so the sewer fumes don't come up. ... Kenmore Dishwashers
The control panel on my Frigidaire Professional Series 24 is not working. The lights are all blinking and the letters Er s are flashing. The model number is FPHD2481KF1. I cannot find what these three letters mean exactly! Thanks.....
... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher
I have a one year old Kenmore Dishwasher model # 587.15100981 that will not spin, water will fill and empty but will not cycle or spin the arms. I cannot find any obstruction in tube, or anything in the arms, they both will spin easily. I have ran the dishwasher with nothing in it, and it does the exact same thing, would I be better off financially buying a new one, or repairing the pump?
... Kenmore 24 in. 17483 Built-in Dishwasher
I have a Kenmore Type 575-0 Dishwasher, model number 665.16033401, Style 16033. It runs trough the cycle, once the cycle is complete the clean mode light is on but most dishes are still dirty. I had someone here to repair this about a year ago. All he did was press alternating two buttons, which I have tried, it resets and lets you start a new cycle. However, the problem remains. Last time there was only button pressing involved, no need to replace anything. So, I would hate to have to pay ag
You need an electronic control and heating element ... Dishwashers
JENN-AIR Model number JD3B10AWX. Bottom of dishwasher is dirty, I want to clean it. I have removed six screws holding plate down, but cannot find any way to remove spinning blade. I think there's a filter underneath that I can clean or replace. Questions: 1. How to remove spinning blade? 2. Am I going about this correctly. Thank you
We have been having issues with our model where there is dirty sand deposited inside of glasses and dishes.You need a torque wrench for a triple square torque screw ... Jenn-Air Dishwashers
Where can I find the model number of my kenmore dishwasher
There should be a label located on the inner lip of the dishwasher where the door makes contact when closed. The label should have the model and serial number. If the label is missing you might find one on the unit if you pull it from the cabinet. ... Kenmore Dishwashers
I have a Kenmore Elite-not sure where to find the model number but the manual lists 665.160524, 1650594, 160534, 170524, etc. the problem is that the top dishes are not being washed. nothing is blocking the arm from spinning. Should water be coming down from the top? It doesnt appear that it is. Nothing seems to be reaching these dishes
Hello. The problem is most likely in the rear of the top drawer. Pull out the drawer and empty it of all dishes. In the very rear you will see a tube that will align with the water supply tube on the rear of the machine. there are little clips th ... Dishwashers
Dishes are not getting clean. coming out with residue and spots. I do not think the JetDry rinse dispenser is working. I purchase the dishwasher new 1/6/01, but cannot find the model number on the unit.
Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag MDB4630AWS Dishwasher
Customer bought house with a Viking Dishwasher already there. He has no user manuals or documentation with the model number listed. None of the stickers on the side of the door have a Viking model number. This unit is a Quiet Clean System with Auto Water Heating and is (he thinks) about two years old. How can I find out what the model # might be or better yet how do I find out the part # to fix the main control board / interface. It just keeps blinking.
Check the back of the unit for a tag.... otherwise - removing the clock... it should have a part number on it.\015\012\015\012Thanks! ... Dishwashers
Can't find model number.
... KitchenAid Dishwashers