Having problems with your Kenmore 17459 Free-standing Dishwasher ?
Pfister First Pullout Kithen Faucet
\015 My last child is moving out, time for a dishwasher. I'll need a portable, but can I hook up a portable with a pullout faucet?\015
Repair Help & Product Troubleshooting for Kenmore 17459 Free-standing Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Pfister First Pullout Kithen Faucet
... Kenmore 17459 Free-standing Dishwasher
My portable dishwasher hose that attaches to the faucet is to short for where I want my portable dishwasher to sit. I would like for it to sit in one spot. I am not allowed to alter or cut holes in the side of cabinets, I am renting. Is there an extension for the hose to the faucet? If not, what can I do to make the hose longer? If I really have to I will cut the two hoses that comes from the dishwasher to the faucet, but I would rather have an extension first.
You should be able to find extension or replacement hoses that you can use to extend the existing hoses at a hardware store. If you need to join two hoses that have female connectors, adaptors with two male connections are available. ... Dishwashers
I have a prtable dishwasher. We are getting a new pullout faucet and I would like to add a dedicated faucet just for the dishwasher. Is there such a thing and if so, where can I get It.
... Kenmore 17439 Built-in Dishwasher
Pull my pump first startsthe pressure is good as soon as i pull the trigger the pressure is gone as long as i hold trigger just faucet flow let go of it pressure builds up until i pull trgger , no pre
... Annovi Reverberi RMW2.5G25D
I have a bosch smu 2000 series dishwasher. it has always worked well with no problems but then all of a sudden a week or so ago, the water stopped coming into the dishwasher to wash the dishes. the faucet and all other water areas continue to work w/o problems (i.e. bathroom, shower etc). in attempting to use the dishwasher, the entire cycle seems to be working, i initially hear what sounds like an initial water discharge when the cycle first starts and during the entire cycle it sounds like it
... Bosch Dishwashers
I installed a new faucet ( Price Pfister ) and I cannot find an attachment that will fit the hose on the dishwasher. I have tried 4 different ones already. Any suggestions?
... Frigidaire 25 in. FDP750RC Free-standing Dishwasher
Hi All, we have just bought and fitted a Hoover HEDS 668-80 Dishwasher. When we tried to run the first wash, the pre-wash and wash light both light up simultaneously. The instruction manual says this means, "longer inlet time", with the possible causes "Faucets is not opened". Could anyone help? Many Thanks. Lisa. :-)
You do not have enough water pressure,, either change the water supply or check the pressure in your house should ba about 70lbs, to work the unit properly,, you could also increase the water supply from 3/8 to 1/2 inch up to the connection of the un ... LG LDF6810 Built-in Dishwasher
Dear Sir We are a professional sensor sanitary wares manufacturer in China. Our web site is http://www.oulon.com We are producing below products : ---- automatic faucets ---- automatic urinal flushers ---- automatic toilet flushers ---- automatic soap dispensers ---- automatic hand dryers They are controled by infrared sensor and CPU,so they are touchless,sanitary, intelligent and water saving. We focus on high technology and high quality,have many years OEM experience,is one of the first-rate s
And just how does it save 70% of cost,,I have been doing plumbing for 34 years, these are sanitary at est but there are no savings on ansything you have,,,,if anything it would cost more to fix or replace there infered then it would be to just change ... Whirlpool GU2400XTP Built-in Dishwasher
I have just installed a ADP5000WH and it successfully completed 2 washing actions. Now when I try to do a third load it comes up with Error 1 which according the manual means longer inlet time and the cause is the faucets are not opened. Nothing has been changed since the first two loads. Can you please advise.
... Whirlpool 24 in. DU920PW Built-In Dishwasher
Kenmore Ultra wash III will no longer stay connected to faucet after filling...what part should I replace the hose or the faucet adaptor? When we turn the faucet on to start up the dishwasher it falls off...when we finally get it to stay connected with water on...it will fill but then falls off again...get it to stay on, it empties, but then after it has completed filling up again it disconnects from the faucet.
If your adapter that hooks up to the faucet has 4 little white plastic jaws inside it then it can be rebuilt. there is a kit that replaces those 4 jaws, the spring, the attaching clip and the internal seal.. usually runs around 10 buks or so. if i wa ... Kenmore Dishwashers
I just bought the Danby DDW611WLED Countertop Dishwasher and the adaptor included does not fit on my faucet. I live in an older apartment. How do I know what size faucet adaptor to buy? If I do get one that fits my faucet, will it fit the Danby hose?
My brother needs the faucet adapter for his DDW396 counter top dishwasher (forgot to take it off faucet when moved). Have the quick disconnect but not piece for faucet. I tried to find it online for him but don't know which one is correct and Danby doesn't seem to have a parts store.
I did the same thing when I moved. I went to Home Depot and was able to pick up a replacement nozzle there. ... Danby DDW497W 22 in. Countertop Dishwasher
I have just moved into a home with the DS-603i and used it for the first time. I put it on the first load and seemed to go for way to long. so i opened it up and t washed the first load ok, but continued to make noises. It would make these noises even when draw opened. Turn on & off at power and it doesn't change the noises. The light on inside indicates rince, which i think is a F1 error code according to the manual online. Any tips on how to fix this?
The F1 error code indicated a leak problem. The noise that you hear is from the pump motor. There is a leak due to the top lid not sealed properly, so the water is shooting out during the wash cycle. It did not seal tightly because there are 2 actuat ... Fisher and Paykel 24 in. DS-603 Built-in Dishwasher
I have a Kenmore Quietguard portable dishwasher which does its job excellently. My problem is that I can't seem to find a proper spigot attachment in a standard hardware store, like Rona, that hooks up to it satisfactorily, or at all. On the faucet I had before I had to wrap the joint tightly with a big dishcloth or it would squirt all over the place. I have a new faucet now, and so far the dishwasher's faucet attachment won't even stay on when the water's running. I'm wonder where I can get th
... Kenmore 17259 Free-standing Dishwasher
Faucet connection I bought my countertop danby today and ran one load and the faucet connection came apart and I can not figure out how to put it together so it is basically worthless. Springs everywhere.
You only need to put back on the steel clamp that fits over the assembly which holds down the shield, the spring, and keeps the 4 ball bearings in place. The ball bearings may be tricky though as they tend to fall out when your putting the assembly ... Danby 22 in. DDW396 Free-standing Dishwasher
A GE triton dishwasher causes hammer noise when stops filling. The sink faucet works fine as do all the other faucets in the house. I cleaned all of the traps in the dishwasher. Because the sink works, I don't think it is a sink valve problem. I turned off the water to the house and drained the system, the air chambers should be good. Is there some component of the dishwasher that could be causing the noise? Would cleaning the pump help? If so, how would I do that?
The cause of the hammering noise, (slamming) is due to the water inlet valve on the Dishwasher (DW) shutting off abrutly once the DW reaches the proper amount of water.\015\012\015\012If this is an older DW, you might want to replace the ... GE Dishwashers
Hose that hooks to faucet blows off when turn on water ive had dishwasher for about a year and just started having trouble and already replaced adapter that hooks to faucet
... Whirlpool 24 in. Portable Dishwasher Dishwasher
The adapter on my maytag portable dishwasher comes off the faucet when I try to run it sending water everywhere! We JUST replaced the adapter and hoses, $50 and not the problem. It seems that the plastic pieces (not metal balls) are wearing out as soon as they're used. Does anybody know what I can do or if that isn't the problem, could it be that I have the wrong end on my faucet????? HELP!!
If you just replaced the connector and it won't stay on, replace the adaptor on the faucet. ... Dishwashers
My Whirlpool GU2400XTP dishwasher keeps blowing the fuse. It sat up for 6months because the control panel went out and I couldn't afford to get a new one. Finally replaced the panel and the thermal fuse blew during the first wash cycle. I tried to put a 15AMP fuse in it's place to check it out before I bought a new thermal fuse and it too blew during the first cycle. Any ideas?
Are you replacing the wires along with the fuse? It is important to change the wires too as they are usually the cause for the fuse blowing. Be sure and get the fuse kit that includes the wires. \015\012\015\012Is your water too hot? Hot ... Whirlpool GU2400XTP Built-in Dishwasher
MY SECOND WHIRLPOOL ADG7460 DISHWASHER WAS INSTALLED THIS JULY WHEN MY FIRST(DURING IT'S FIRST YEAR) COULDN'T BE FIXED AFTER 4 ATTEMPTS, THE HEATING ELEMENT KEPT BREAKING DOWN, HENCE NO HOT WATER NOR DRYING. NOW AFTER JUST 2 MONTHS THE SAME PROBLEM HAS OCCURRED WITH THE NEW ONE. ANY IDEAS????
... Whirlpool Dishwashers
Maytag dishwasher The dishwasher goes through the first wash cycle on a light setting and first two on a normal cycle but will not continue.The motor hums but does nothing else.It drains fine as well after the wash cycle.
Hi kimleh.\015\012\015\012I'm Harvey the Master Plumber.\015\012\015\012Your question is: The dishwasher goes through the first wash cycle on a light setting and first two on a normal cycle but will not continue.The motor hum ... Maytag Dishwashers
Smeg DF612S All starts well but after 40 minutes stops with a beep and will not progress to the main wash cycle. Instead all programme lights come on (located on the left), along with the first 2 phase lights (the first two of the lights on the right hand panel). This indicates error code 3 (cannot pump out water), but water is entering and draining perfectly. Please advise.
Check to make sure there r no kinks’ in the drain line or\015\012that it is not clogged it sounds like the sensor is tripping because there is\015\012too much strain on the pump just like a breaker. ... Smeg 24 in. DWI612 Built-in Dishwasher
Indesit DV620 HiWhen I turn my indesit dishwasher DV620 on it fills with water for pre-wash with the first button lit and then the first and second buttons flash and nothing else happens!
Check your manual it should tell you what this code means and wether you can deal with it yourself ... Indesit 23 in. DV62 IX Built-in Dishwasher
Dishwasher has been stored. Was working fine-ish for first half dozen washes. Now not starting wash. From troubleshooting in manual I'm holding down first two buttons and it's saying "End", but keeps moving back to SOAK function (17 mins) and not doing anything. Display shows whole soak cycle to run, but on holding down start button it makes no difference - doesn't beep to acknowledge and start cycle.
After bringing the unit from storage did you conduct any service on it? Did you remove any water before storing the unit? when you store a unit like this you need to totally empty the unit from everything including wate ... Smeg 24 in. DWF614SS Stainless Steel Free-standing Dishwasher
I have a beaumark Whisper wash 1 and I just moved. The kitchen faucet is too small to have the hose connect properly. I would like to know if there is an attachment or do I have to but a new faucet?