Having problems with your Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher ?

The spinner on my washer fell off. I got replacement kit 8193768. It says "easy to install" but gives no instructions. Can you help?


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The spinner on my washer fell off. I got replacement kit 8193768. It says "easy to install" but gives no instructions. Can you help?


... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

I have a pressure washer with a faip 3 piston pump. the other day i was using it and it stopped unloading. i cleaned the unloader and it didn't help. I bought a new one and it still won't work. I e-mailed Ryobi and they will not respond. There were no instructions on installing and adjusting the unloader. Could you give me an idea how to install and set up the new unloader. Any help would be most appreciated.


I think your main problem is that the unloader valve needs to be lubricated. Use the very best water resistant bearing grease you can find. If you can e-mail me a pic of your unloader assembly I can try to explain how to set it up. [email protected] ... Honda Pressure Washers

I just bought a Kitchen Aid KUDS30IUBL4 Dishwasher and it came with come sound insulation inside the dishwasher. On the insulation it says to read instructions for installation, but I cannot find such instructions. Can you help? Chuck


Drape the insulation over the top of the DW to insulate it from the countertop. ... Dishwashers

I just purchased a RMV2.5G27D Universal pump. Installation was easy, but I have two questions. 1. No where in the booklet does it say to put oil in it, does it come with oil already inside? There was no oil in the box but the instructions kept refering to 2.2 ounces of oil. 2. It had a red plastic plug opposite the water intake, included was a brass plug that fits into that area, does the plastic plug stay or do I put the brass plug in it?


The red plastic plug comes off, that is the plug that is only used for shipping. You should have got a ventable oil plug to replace that one in the box. The oil you would need is this ... Annovi Reverberi RMV2.5G27D Pressure Washer Pump

I just purchase LG7392 ST dishwasher and am trying to install. The instructions and photos in the manual for leveling the dishwasher do not match the dishwasher. The front legs are easy to turn. Neither back leg will move even with the assistance of a wrench. There doesn't appear to any way to adjust. Help.


... LG LDF7932ST Builtin Dishwasher

Installation Question Instructions refer to two flexible hoses; there is one hose with the unit, and just one port on the unit. There are two adapters, instructions say put one on each hose. Hose came with one adapter already in place. Am I supposed to put the other adapter on the other end of the hose?


... Amana APO8JR 8,000 BTU Portable Air Conditioner"

I have an Electrolux dishwasher Model # EIDW6305GS1. I am getting an error "01", which means a leak is detected. It did this 5 months ago and the repair man replaced the pump and control panel. Now, after it happened again, I contacted Electrolux. The sent me a Leak Repair Kit, but with no instructions. I contacted Electrolux again and they said that they could not provide the installation guide. Can you help me located the installation guide or offer assistance?


... Dishwashers

The clean light is flashing and the instruction manuel says, that the unit has malfunctioned and to call a service tech to check the Heater circuit. I have unplugged the unit and it did not help


... KitchenAid 24 in. KUDP01DLBS Free-standing Dishwasher

I have a broken drain hose on my LG Dishwasher (Model LD-1403W1). I have the part to replace it and cannot see how this is done. Can you assist with instructions on how to replace thew drainage hose. Thanks for any help you can give


... Dishwashers

I borrowed my nieghbors power washer. It worked the first day all day. In the morning i filled the gas with a fuel stabiler, and 30 oil. I may have over filled it. Upon turning it on the oil started leaking from the air filetr compartment. It starts, but then smokes starts to fume and all the oil leaks. Did I break it or is it a easy fix. I cleaned the filter housing. Also the filter was soaked with oil. should i get a new filter and install it or what is the solution. need help.


You will need to get a new filter, and drain some of the oil out of the machine. If you over fill these this will happen. 90% of the time nothing is broken. ... Karcher 2500 PSI Pressure Washer

The thermostat seams to have given up in my bosh dishwasher and it is taking over2 hours to do a load I was wondering if I could buy a thermostat and get some Instructions and diagrams on who to instal the new one . Must be 8 to10 years old. No one in my are fixes or can buy Bosh parts I was hoping you could help. Kind Regards Anthony Lee


Hello Anthony. Yes. For Bosch parts and parts diagrams go to this link RepairClinic.com\015\012\015\012Enter your model number and you will have access to 500 Bosch parts and more. I use this site daily and it is excellent. The part will c ... Bosch Dishwashers

My dishwasher screen is saying "overfilling". I followed the instructions for stopping it, but it won't turn off. Something is still chugging in there. Help!


... Asko 24 in. D3250 Built-in Dishwasher

Hi All, we have just bought and fitted a Hoover HEDS 668-80 Dishwasher. When we tried to run the first wash, the pre-wash and wash light both light up simultaneously. The instruction manual says this means, "longer inlet time", with the possible causes "Faucets is not opened". Could anyone help? Many Thanks. Lisa. :-)


You do not have enough water pressure,, either change the water supply or check the pressure in your house should ba about 70lbs, to work the unit properly,, you could also increase the water supply from 3/8 to 1/2 inch up to the connection of the un ... LG LDF6810 Built-in Dishwasher

Zanussi dishwasher, z t i 6865, 6 years old. when put on, normal beep and noise begins;machine pumps away water, stops too early, never finishes a chosen program ( so no end-beep is heard) and the first 2 lights are on, the first programlight(cold wash) flashes. i have checked main-watersupply, cleansed with soda.Nothing helps sofar, please give instructions soon. ellen.


... Zanussi 24 in. DE6544 Built-in Dishwasher

New dishwasher hotpoint lft114 model just installed, however no water is going in machine, yes have checked all pipes etc , you can hear water then the lights all flash . on calling engineer they said u have to programme it first time? though does not say this in manual ??? HELP !!


... Hotpoint Dishwashers

Model kuds 02frb10 serial # fs4604161 at first use attempt after install door would not latch, unit is in st thomas usvi where there are no kitchaid authorized repair people; local repairman has replaced latch, gasket, and door hinges all to no avail; now he says not repairable and it is junk to throw away; help


Hi\015\012\015\012\015\012\015\012\015\012This is a common problem not only for your type of dishwasher but also with other models. You need to unscrew the screws on the inside of the door. After all the screws are taken out ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

I have just moved house and there is a Bosch Dishwasher installed unfortunately I have never owned a dishwasher before and there is no instruction manual with it. It has a model number,SMS6032GB/20. Please could you help me with this. Thanks, Sarah


Call up Bosch Customer Care at 1300 368 339 in AU. Ask them for the manual and they will post it to you. I also had the same issue and they copied the manual from their archives and sent me the next day.\015\012\015\012Sandy K ... Bosch Dishwashers

Our kenmore dishwsher somehow got "locked" and that light keeps flashing. I cannot get the lock to come off even by doing what the instructions say. Can you help me reset this? Thank you.


Hi,The usual way to cancel this on a Kenmore machine is to press and hold the "No heat dry" button for longer than 4 seconds. This should cancel the lock and resume normal function. I recommend you hold this button in for at least 10 seco ... Kenmore Dishwashers

I have a model PW 2200 gas pressure washer. It suddenly lost it's high pressure the other day after working fine for @10 minutes. It's getting plenty of water, but the engine doesn't seem to rev up to give it the high pressure. The operating instructions say to check the oil in the engine, and the PUMP before starting, but I haven't found any place to check for an oil level in the pump????Any ideas, I'm very confused.


... Pressure Washers

Just installed bosch exxcel and light on saying check water. Water is switched on there is no kink in pipe - help please


Best Solution\015\012posted on Jan 17, 2010\015\012\015\012\015\012 ... Bosch 24 in. SGS45E02 / SGS45E08 Exxcel Free-standing Dishwasher

I have an oily film over my dishes. I have tried changing detergent and using less detergent without any luck. The manual says to try a vinegar wash and that the jets, or pump may be clogged, but it doesn't give any instruction as to how to clean them. Any ideas?


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... KitchenAid Dishwashers

I have a brand new Miele dishwasher which has worked grate since it was installed 2 weeks ago. It keeps shutting itself off & indicates an F13 fault. I looked in the manual, see that water is going in fine & pressure is good. It then says to clean water intake filter. How do I get to that ? I don't have a user maintenance manual. I'm on city water & doubt that the filter is clogged but My wife will kill me if I don't get it fixed today. Can anyone help. Glenn


On my Miele 1220 dishwasher, the inlet filter is inside the inlet hose connector, where it screws onto the water supply. To clean it:\015\012\015\0121. Turn off the stopcock.\015\0122. Unscrew the inlet hose.\015\0123. Remove the black rubber s ... Dishwashers

1997 Honda integra type r, installing a tacho! i know its the blue wire on the distributor but theres 3 blue ones, can someone either give me a link to a picture or and easy way to determine thanks :)


... Honda Maxus Pressure Washer MX5222

I have an LG dishwasher. Model LDF7811BB. It is giving me a TE error code. I had previously used ya'll for help and ya'll emailed a tech sheet saying to replace the thermister. I called to order the part and the supplier said they can't find a thermister on this unit. Can you tell me what part number it is? Thanks, Greg.


Hi \015\012 \015\012Either the inlet water temp too high over 140 degrees or your thermister went open, or you have a bad control board. This type of error code will require using an ohmmeter to chec ... Dishwashers

Bosch SGU55E15AU. dishwasher installation instructions are not in english please help glenn


... Bosch Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0634 seconds