Having problems with your Kenmore 24 in. 15932 Built-in Dishwasher ?

Kenmore UltraWash Dishwasher is leaking from black hose...

\015 Our 9 yr old Kenmore UltraWash Dishwasher is leaking... apparently from the black hose that runs from the bottom up the side of the machine (I am assuming it supplies water to the sprayers. Can I pull the unit out without disconnecting the main (copper) supply line?\015

Answers :

No you will have disconnect the copper line. I would suggest that while you have it out that you replace the copper line with a braided stainless steel hose (also known as a dishwasher connector hose) If possible get a 60" or 72" hose so you can hook up the dishwasher when it is out and then push it back in with the water supply already hooked up.
Repair Help & Product Troubleshooting for Kenmore 24 in. 15932 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore UltraWash Dishwasher is leaking from black hose...


No you will have disconnect the copper line. I would suggest that while you have it out that you replace the copper line with a braided stainless steel hose (also known as a dishwasher connector hose) If possible get a 60" or 72" hose so you can ho ... Kenmore 24 in. 15932 Built-in Dishwasher

We are having a small leak near the front valve or hose connection in our Kenmore dishwashers. This tends to happen when we are out of town and have turned the household water off. The dishwashers also has water in the bottom when we return. We have tried to set up the situation to make it leak in order to find it, but have not been successful. Have there been similar complants?


... Kenmore 16762 Dishwasher

The black hose on the left side (when looking at the dishwasher is eaten by mice....I need the name of the hose and part number. kenmore 665.1703 is the model number...


A few numbers are missing from the end of model number you provided but the part you're looking for is called the "inlet hose".If you can get the rest of the numbers, I can get you the exact part number if you need it. ... Kenmore 15912 Built-in Dishwasher

Kenmore Ultrawash Dishwasher #665 - The drain is clogged and water leaks out when the dishwasher runs. How do you lift up the spinner so you can clear the drain?


... Kenmore Dishwashers

Kenmore Dishwasher leaks from fill spout


... Kenmore Dishwashers

Kenmore Dishwasher 665.1671590 Leaking water at fill funnel.


Step1Inspect the door gasket. As it ages, the gasket can crack or become hard, preventing it from sealing completely. Step2If the gasket appears solid, adjust the door latch so the door seals tightly. Loosen the screw tha ... Kenmore 15129 Built-in Dishwasher

Our Kenmore Ultrawash dishwasher leaks rinse aid. There is always a thin blue line coming from the rinse dispense, even after a wash, but more so between washes. We are usually careful not to overfill, but may have done this once about three months ago, shortly before this trouble started. Could this be related weeks and months later?


... Kenmore Dishwashers

My 6 year old Kenmore Elite DW has started leaking and has a musty smell. The dishes are clean but food residue is left on the inside door and black gunk builds up on the bottom of the dishwasher.


Use a wet/dry shop vac to clean out the strainer and drain from the inside of your machine. A musty smell is a sure sign that food particles have clogged your drain BUT can also mean that your wash/spray heads have become clogged as well. Use a pipe ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore dishwasher is leaking at drain and fill hose assembly


... Kenmore Dishwashers

Kenmore dishwasher leaks near hose connection and sump pump


Cover the leak with mseal adhesive ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The quick connect that hooks up to the faucet does not stay hooked up and leaks on our kenmore dishwasher model # 665.17822000 do i need a new hose and quick connect


... Kenmore Dishwashers

I just had a Haus slimline dishwasher delivered and have tried to set it up. I have followed the instructions to the letter but the water inlet hose keeps leaking out water when you move the dishwasher into place after attaching the hoses. I have tried the manufacturer's hose they provided and two spare i have in my cupboard. I even went out and bought some 3/4" washers and added extra washers to the inlet hose, but it still leaks. What is wrong?


It is possible the dishwasher inlet is set for low water pressure.\015\012\015\012Check the water pressure setting matches your inlet water pressure.\015\012It might help if you provide the model number of the dishwasher. ... Dishwashers

Dishwasher leak My dishwasher has a slight dip leak on the copper hose that rund from the hot water. The leak is between the copper hose and its connector nut. I tired fixing it with plumbers tape but it still leked out the sides of the tape.


Tape won't solve this issue. The fitting I assume is a compression fitting which is a ring on the copper pipe that is compressed when the nut is tightened. If tightening the nut won't resolve the issue, then you will need to cut the copper behind the ... Dishwashers

Leaking dishwasher i have an 8yr old hoover dishwasher & it leaks on the rinse cycle. It's coming from underneath on the left hand side as you look at it. I've checked the hoses & clips on hoses, which seem ok. It only leaks as the water is coming into the machine on the rinse cyle. Never any other time, not even when it's filling for the wash cycle!


If your dishwasher leaks, check these:Main tub sealDoor gasket or sealWater-inlet valveHosesMain tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dis ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Dishwasher leak I have a Siemens dishwasher. There is a leak at the inlet hose and I don't know how to fix this. The inlet hose is not just a screw on/off like most other dishwashers! Please help!


It is difficult to see properly from the video but it appears that the fitting under the tap is the sort used on copper lines that have a flair inside the nut that fits on a taper on the tap.. Have you tried tightening the nut. or remove the hose and ... Dishwashers

My frigidare diswasher is leaking from a left side black hose


Check the hose first - it could be split or damaged esprcially if it's old. Check all the clamps to be sure they are tight. Chack all connections to the dishwasher and drain spur under the sink. Check the drain trap fro any leaks. ... Frigidaire Dishwashers

Kenmore dishwasher leaking from upper vent in door


... Kenmore Dishwashers

I have a GE potscrubber Dishwasher Model # GSD3630ZZ3WW it has been leaking from the bottom for about a week. I took the bottom off tonight and ran the dishwasher so that I could see where it is leaking from. It is not a hose but the leak seems to be coming from the back of the motor or pump fan where it goes into that plastic housing that attaches to the bottom of the dishwasher seems to be leaking in the very center of that housing where the motor shaft enters the housing. Water is just spray


... Dishwashers

What is the black hose for (trying to disconnect dishwasher. Have followed all the appropriate steps -turning off power/turning off water supply, disconnected everything so far..........except for big black hose. Not exactly sure what this is (comes out of wall & connects to dishwasher). Please tell me what this is for & how to disconnect -thanks.


Hi thanks for the question did you disconnect the drain hose from the sink if not disconnect could be big black hose thanks the appliance doc ... Dishwashers

Kenmore Elite dishwasher leaking from the door.


... Dishwashers

Dishwasher Leaking Dishwasher leaks from underneath the right front side of appliance. Can't tell exactly where it's leaking from, because of plastic guard/support on underside. All of the connections and hoses are in good shape. I'm assuming that it has something to do with the draining process, as it will leak 2-3 times during a wash cycle. Sometimes it's very little water and sometimes it's as much as a gallon.


Hi there, dishwasher leaking might be due to either of these causes, check these:Main tub sealNote… If the main motor of your dishwasher is mounted vertically, beneath the center bottom of the dishwasher, the foll ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Trying to replace drain hose on LG dishwasher. Replacement hose has a white U shaped fitting at top of loop with a black hose coming off of middle of the U with no apparent connection point in dishwasher. Any ideas?


... LG 24 in. LDF 7811 Stainless Steel Built-in Dishwasher

I have a washer model 1805 (1800 PSI). Everything works but there is always leaking of water (sprays) when I use it. The leak is not from where the water hose connects to the washer, but where the black piece attached to the hose is connected to the body of the washer. I can still do a decent job of power washing, but am wondering if the leaking of water is reducing the power of the washer.


Yes, leaking water will reduce the pressure. Sounds like you need to replace the O-Ring inside the connections on the pump. This is where the pressure hose connects to the pump. If you look carefully inside that connection you will see an O-Ring. Use ... Campbell Hausfeld PW1805 1800 PSI 15 GPM Pressure Washer

My dishwasher leaks water from the top of my sink when in the drain cycle mode causing a mess on the counter top. How do I stop this leak? The plastic cover to the part which is located next to the faucet is cracked but there appears to be no leaks on the hose or on the part itself. Also, what is the purpose of this part? Is this the actual drain for the dishwasher and if so, why doesn't it tie directly into the drain?


... Whirlpool Dishwashers

My dishwasher will not drain after cycling. I have check the drain hose connected to the disposal. All is in good order the hose is not cinked and the air hole is unblocked. I have also checked the screen at the bottom of the dishwasher, there is no debris or blockage here either. I can run the dishwasher on normal, it cycles but I still have stagnat water left beneath the bottom rack. How do I check my pump to see if it is working or could it be a short of some kind? It is a Kenmore Quite


The problem is a solenoid under the unit. It is a small black cylinder that operates a valve to change from the wash cycle to the drain cycle. You can probably order a new one from Kenmore for pretty cheap. ... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2038 seconds