Having problems with your Kenmore 24 in. 15932 Built-in Dishwasher ?

My Kenmore Dishwasher isn't cleaning the upper rack of dishes, and the spray arm isn't rotating. I have cleared debris from the screen. Where do I look next? The lower rack is operating perfectly.


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 15932 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kenmore Dishwasher isn't cleaning the upper rack of dishes, and the spray arm isn't rotating. I have cleared debris from the screen. Where do I look next? The lower rack is operating perfectly.


... Kenmore 24 in. 15932 Built-in Dishwasher

I have a whirlpool GU2700XTSQ1 dishwasher. I have the typical top rack not cleaning problem. I have removed the rear washer tube that leads to the top sprayer, no clogs. Upper arm is clear, lower arm is clear. I also removed the lower cover, checked the chopper screen and inlet, no clogs. There is a screen inside that I cannot get to. It appears to have some sort of paper or cloth sticking through the screen with a 50% block. Perhaps a sticker or label from a dish. I see this screen when looking


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Whirlpool GU2700XTSB / GU2700XTSQ / GU2700XTST Built-in Dishwasher

Glasses int he top rack of my kitchenaid dishwasher don;t get clean. they finish the run spotted and covered in what looks like baked on dirty dishwater. dishes in the lower rack look ok, but the silverware is always dirty, too. i figure it's one of two things - either the top sprayer isn't working, or the machines doesn't drain the dirty water well enough. or maybe it's something else - cycle regulator? the machine is about 4 years old. thanks


If you have hard water, glasses can look spotted and cloudy even after cleaning. Sometimes changing the dishwasher detergent can help. The easiest solution to clearing up glasses that start to look cloudy is to add some vinegar to the bo ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Our Maytag dishwasher, mod MDB9150AWS, has abad lower rack due to rust and prongs coming loose. Maytag sent me a replacement BUT without the center spray tower. It looks like trouble to remove the old one and install it in the new lower rack. Any help would be appreciated.


Yes, I resolved the problem after thoroughly studying the assembly. It was relatively simple; all I had to do was turn the spray tower 90 degrees and it came free of the rack.\015\012\015\012Thanks for the web site, nonetheless. ... Dishwashers

I have a Fagor/Edesa dishwasher 6 years old and need new plate racks for top and bottom. Model no is VES-032S but if this model is no longer made the sizes of the racks are; Upper rack depth 470mm by width 520mm; lower rack depth 505 x width 517mm. Look forward to hearing from you. my e mail is [email protected]


... Dishwashers

Rusty racks The racks of my Maytag MDB4050AWW sn 15638404SZ are all rusting, both uppet and lower. as I am looking to sell my house this is a problem. I would expect the racks to last as long as the dishwaher, I am a single person, so the dishwasher is not used a lot. Jean Whalen


Check your warranty to see if it covers your racks. Some models have a longer warranty against rack rusting if you have Duraguard racks. If they are Dura guard racks and still under warranty, Maytag will replace them at no charge. ... Maytag MDB7100AWB Dishwasher

Bosch dishwasher won't drain...it washes the dishes great but there is water remaining in the bottom after the wash cycle is finished. I have done the following with no results: 1. checked drain hose to sink and it was clear of debris 2.removed filter and cleared it out as well as removed the bottom cover and checked there...looked clear. please help


Hi\015\012\015\012There are a few things to check with this problem on Bosch Dishwashers. \015\012\015\012As always for safety reasons disconnect the dishwasher from the mains supply before carrying out these checks.\015 ... Bosch Dishwashers

Ariston L 63 dishwasher does not drain. Hoses appear to be clear. Underneath dishwasher there is a clear plastic container attached to the salt container? that looks to be clogged with debris. How can I clear it out? Many thanks.


DONOT EVEN TO TRY TO DEAL WITH SALT CONTAINER , YOUR PROBLEM IS OUT OF THIS AREA,\015\012YOUR M/C MAY NEED TO DEAL WITH DRAIN PUMP\015\012IT IS ALSO UNDERNEATH>\015\012 THANKS ... Ariston Technologies L63 Free-Standing Dishwasher

Water level low. dishes having pasta debris left on, which should be easily washed off. dishes on center lower rack, upper rack corners are not clean.


Sounds like a bad circulation pump. but this is how you check. once the water start to circulate and the unit is wahing open the door and see if you have a steady water droplets at the very top evenly. if you dont 9times out of ten pump is 50 to 75 % ... Dishwashers

I have BOSH Semi integrated dishwasher SGi4305AU/12 which went in a strange dead cycle. Any operations I will choose it just try to **** water in to the drain. Also I think that it is important that now on numerical display shown a red dot at the right bottom cornet of it which has not been seen before. I check filter area for debris and it is clean. I checked drain pipe and it is clean too. Moreover I look inside with the open door during operation and what it does that small amount of water


I would suggest downloading a user manual for your dishwasher form this site. Click on service link and then go to the instructions ... Dishwashers

Have a LG model LD-14AW2 dishwasher which has done good service for many years However, it now sems not to have enough water pressure to operate all the rotary sprayers at the one time - thereby not cleaning properly Have purchased a manual and raken the whole machine apart looking for a partial blockage of the water ways - non found - all looks perfect - still no water pressure I would suspect the pump - however, would have thought a pump either gave full service or stopped - not parti


Hi The issue seems to be with the float switch assembly that is bad and should be replaced. Float assembly is found inside the dishwasher's tub, on the bottom. The water that ... Dishwashers

Kenmore 665.16389300 Dishes on top rack not cleaning. I took out upper rack and checked for debris in upper spray arm and feed and it is all clear. Any suggestions ???


Test by pulling out the lower rack and run an upper load, it may just be a loading issue. Some washers are better than others, in that they have stronger moters and impelors than others. The impellor may have something like a fork, knife, or broken g ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

I have a Kitchen aid dishwasher which works fine to clean dishes on the bottom rack but doesn't clean dishes on the top rack. I can't figure out how to clear debris out of the bottom that might be clogging the hose to the top.


This is caused by the chopper screen being pluged up you have to take the sump apart and clean the chopper. ... Dishwashers

I am looking for a lower dishwsher rack for a Kenmore ultrawash stock #15825 model number: 655.15825691 any ideas where to get one. Thanks


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

My Bosch SMU 4000 suddenly stopped filling with water. I had a major drain backup on Thanksgiving and the dishwasher filled with debris. The I flushed the supply line and it was clear so I think perhaps the water valve is clogged or broken but I have no idea what it looks like or how to remove it.


... Bosch Dishwashers

Pld2560lcc1 Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


Pulled the touch pad, go after the middle third with a very small screw driver, cleaned the flex circut with contact cleaner\015\012\015\012powered up fine seems to be working again ... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

The dishes on the top rack are not cleaning at all. The sprayer arm is not rotating. The jets are all clear of debris. And of course, warranty just out.


Hi Please check if something is blocked near the top spray arm, also make sure that all holes are oopen. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure ... LG LDF6920ST Stainless Steel 24 in. Built-in Dishwasher

After manipulating the latch to watch what the dishwasher is doing, it looks as if the arms aren't spinning for the top or bottom rack....why would they not spin? I cleaned both out to make sure there wasn't debris. thanks!


Hi,\012Here is a tip that I wrote about dishwashers and the spray arms not spinning..\012\012Dishwasher Spray Arms not Spinning\012 ... GE Dishwashers

PLD2560LCC1 Frigidaire Dishwasher...Control Panel shows 65 minutes left on lower rack, works for about 1 minute, shuts down. None of the buttons work. I changed the control (major circuit) board, same problem. I wonder if it's the control "panel"? I took that off and looked at it. Seems okay, but could the problem. I've heard this model has control problems, but I'm not sure if they mean the major control board or the control panel that has the buttons.


... Frigidaire 24 in. PLD2560LCC Energy Star® Built-in Dishwasher

I can remove the lower spray arm in the Kenwood Elite 66517262401 but cannot remove the screen to clear out debris below which is preventing the machine functioning well. What is the solution?


Found a screwdriver which was able to remove the special screws fastening the screen. ... Dishwashers

Dishlex DX450 has been working OK for years - suddenly not washing - white deposits and cutlery looks greasy - but machine clean and all filters and arms clear of debris. Have removed pumps and hoses - all clean - no obvious problems. Seems to complete a full cycle - but the problem is consistent every wash - independent of the dishes. Welcome any insights - thank you, Richard


... Electrolux Dishwashers

GU980 dishwasher I have a buzzing sound when the washer is in drain mode. The manual indicates there might be something in the Power Clean Filter, and that it will go away when the object grinds up. I called Whirpool, and they said the same, and to run for 2-3 cycles to make go away. 2-3 cyles later, noise is still there. I noticed a nub off the rack that looks like an end peice of metal broke off from rust. My guess is it's stuck in the PCF, and will not grind up. I removed the nut, lower spray


The nut holding the inpeller has to come off it is probally frozen\015\012if it snaps off then the pump assy willl have to be replaced or at least the motor, you need to get below the impeller to see what is down there though, or let it run as ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

PLD2855RFC3, we had a pwr failure, now the dishwasher won't start. The cycle buttons "pots pans, upper, lower racks operate, but the Rinse , Hi-Temp sanitze, no heat dry and of course the start buttons are all inop. The "child lock" is not activated


First of all unplug the dishwasher from a main wall power outlet for 5 minutes.then replug in and try.this should reset the device internally.internal reset solves most of such problems.if the problem still exists just open the device back to check i ... Frigidaire PLD2855RFC Dishwasher

I need the upper and lower rack rollers replaced but do not know the part numbers. I am looking for a parts diagram on the internet but have been unable to find one. GE Nautilus, Model GSD2200G00CC


This link, provided by www.repairclinic.com shows what you need.\015\012\015\012 ... GE Nautilus 24" Built-in Dishwasher

The latch won't engage, so the door won't close. Obviously, this means the machine won't operate. We have removed the racks, checked the hinges to see if anything is lodged there and looked to see if anything is in the unit preventing the door from closing. Could the latch be broken? If so, what is involved in the repair?


... Bosch 24 in. SHV57C03UC Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1015 seconds