Having problems with your Kenmore 24 in. 16019 Built-in Dishwasher ?

The dishwasher just stopped working. I haven't taken it out of the enclosure under the sink just yet, but what are somethings that I could do to actually see if I need to just buy a new washer. The washer has been in our home for at least 2 years to date.


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 16019 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The dishwasher just stopped working. I haven't taken it out of the enclosure under the sink just yet, but what are somethings that I could do to actually see if I need to just buy a new washer. The washer has been in our home for at least 2 years to date.


... Kenmore 24 in. 16019 Built-in Dishwasher

10 year old Kenmore Ultra is leaking early in the washing cycle. Wondering if this is worth fixing or need to bite the wallet and buying a new one. I am worried about affecting the new cabinets even though the dishes seemed to be clean on the two occasions that the dishwasher has leaked. Only need a somewhat simple machine- I'd appreciate any suggestions as to what brands I should research if buy is the conclusion. Thanks.


At 10 years old I wouldn't put much if any money into it. Do check the water connections as it may be something simple that just needs to be tightened or a washer replacement. Replacing the valve is a simple and inexpensive fix but don't bother going ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I need a new dishwasher What do you recommend between Kenmore Elite. Quietguard Ultra. Model no. 665.77962K703 versus LG model LDF7920 I get conflicting information- a repairman we know says LG is the better make, needing far fewer repairs than Kenmore in general ( this washer I am thinking of buying was made by whirpool, I was told at the Sears store) But online reports claim LGs need the most repairs. HELP OR... do you have something else to recommend?


... LG Dishwashers

Dish washer Hi there, Last time I started my dishwasher, clear water spilled out in a large amount. We pulled the washer out to realize some plastic parts underneath had totally smashed down. Is it possible to replace those parts, or do I need to buy a new washer?


Yes youcan replace them just give dishwasher name ? ... GE Dishwashers

Hi. My dishwasher won't let me move the latch into the locked position. When I turn the knob past the start cycle I hear a klunk noise. When looking at the latch it is obvious that there is a gold color piece of metal on top of and in front of the silver latch blocking it from moving sideways. Is this something I can fix on my own, or need a repairman or time for a new washer? The washer will be 5 years old in October. Thank you, KIm Martinez


... GE Nautilus 24" Built-in Dishwasher

My Maytag Quiet Series 200 is making loud noises. It appears to be continuing the cycle. When we stop and start the washer, it sounds like the motor is working hard (high pitched sound). It sounds serious. I'd like to troubleshoot myself if possible. Also, what is the criteria for an 8 year old washer when it comes to the decision of fix vs buy new?


... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

Buttons not working, on/ off and dishwasher is less than three years old-see ms like a poor design- Maytag needs to recall or give compensation otherwise company will lose the business. I will never buy any Maytag brand in future. My dishwasher and microwave stopped working. It really frustrating and decided to launch a complaint to maytag soon--Would recommend to stop buying Maytag product in future


... Maytag 24 in. MDBH955AW Built-in Dishwasher

Pressure washer has been sitting up for about 2 years.. worked perfectly before I parked it.. lol.. But, I put a new spark plug on, cleaned the filter, sprayed carb cleaner in it drained the gas tank and added new gas.. But it still does the same thing.. It starts in the choke position, runs awhile, and then shuts off. While its running, I tried to put the switch in the run position and it kills. Just wanted to see what an expert would say about the matter before I Brake it down. thanks


... Briggs and Stratton 020275 Elite Series 3400 PSI Portable Gas Pressure Washer

Asko dishwasher- about 1 year old. Dishes are clean but very wet at the end of cycle. The bottom tub is filled with water (looks clean and warm). The dishwasher is leaking and water on tile kitchen floor. I checked for a float device inside and do not see one. What do you think problem is? How can I check hoses to see if clogged- do I need to pull washer out? Is that hard?


... Asko 24 in. 1895 Built-in Dishwasher

Need a new adjustable nozzle for my power washer. It sprang a pinhole leak in the tube. Where can I buy a new one?


Home Depot,Lowes,Ace& Coleman.com ... Coleman Powermate DuraBuilt 1400 PSI Pressure Washer

Need schematic for gfi/reset button / ac plug for pressure washer. Mine blew a 22uf cap and I need to see polarity to install new one.


... Alfred Karcher K255 Electric Pressure Washer

My 10 year old Miele G 832 SC Slimline needs a new pump. If I have that part replaced, is it likely that the motor will be the next thing to go? Trying to decide whether to buy new or repair.


... Dishwashers

When the cyle is complete the dishes are cold and wet and greasy ones not washed properly. I think it needs a new heater but the person who came out to look at it said it was because it is in my garage (?). I have always had my dishwasher in the garage and never had this problem. If it is the heater, is it an expensive repair or would I be better off buying new. I have a six year old Zanussi de6754


At http://www.usersmanualguide.com/zanussi/dishwasher/de6754\015\012you wil find the user manual, if the dish washer is instaled proper it ... Dishwashers

Bad i bought the 1800 psi washer 2 years ago the head on the hose blew off you sent me a new hose it did the same thing. you sent me anouther hose and it blew off too. finaliy you sent me a hole new washer because of a recall. i didnt get to use the first one all year and now i was going to use the new one the other day 3-28-09 and it is the same washer i had and the head blew off so now i have two washers with no hose, that i can not use. so what do i do now ?


... McCulloch FHH18A Electric Pressure Washer

Normal, light rinse and cancel button are blinking. Turned breaker on and off with no change. Took panel off and tech sheet to give the codes was not there so don't have it. Repairman with no tech sheet says need new control panel. Is there any way to get the tech sheet online to reset and see if problem persists. Kitchenaid kudu02fr The unit is 4 years old.


... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

About a 3 year old maytag stainless steel inside dishwasher, not cleaning, often soap resdue on dishes or silverware, I use fresh new cascade, checked to see if washer fills with hot water, seems to up to the bottom of the door when I open durning cycle, arms go around, no obvious plugging of the screens, no junk in the foot chopper propeller, no paper or plastic or food in the jets of the arms. Motor went out on it 9 month ago and I had it replaced by appliance repair station here in Missoul


Water must be 130 Deg F to wash properly. ... Maytag Dishwashers

Holding water There is water in the bottom of the machine after the cycle is done. There is definitely draining going on throughout the cycle, but it's not draining completely at the end -and the water that is left is murky. Spoke to a friend who tells me it sounds like the dump valve, but in checking on line, that doesn't seem to be a part that even exists any more. Do I need to buy a new dishwasher? This was not in the budget this year... Thanks for any advice! Nancy


Are the dishes getting clean at the end of the cycle, if not then there could be foreign debris in the pump housing that can cause this, needs to be dismantled and cleaned out, if dishes are clean then the pump impeller will need to be replaced ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

I have a Bosch dishwasher she44c05uc/40 It is 3-4 years old. Recently I noticed that the cycle times have gotten much longer. Since then there is a sewer smell in the washer especially when starting a new cycle it comes out of the disposal. I'm wondering if the pump isn't heating the water hot enough. I've also noticed that the dishes aren't getting near as clean as they were before all this started. Especially stuck on food. It used to clean everything now dishes almost need rinsed.


Hello,Welcome to FixYa ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

My dishwasher is 1 1/2 years old and the maintanence buy said I need a new motor. I looks like it is working just no water. I know that there has been recalls on motors could it be that? Georgette


Well if the motor is running not humming it needs water to work so prob water valve is not opening or their is a water safty switch that could be stuck it in the tub usually in the front ... Whirlpool Dishwashers

Once the "start" is pressed, the "reset" option on the same button will not turn it off. This dishwasher is in a new place we're buying, and we're not ready to run a whole cycle to see if the machine works because there's a minor plumbing repair needed under the sink which can't be done till the closing, and there could be a leak. Meanwhile the two green lights and beeping can't be turned off.


Just un-plug it for now,....then of coarse when you can run it plug it back in for test,....ya never know, just un-plugging it could very well reset itself and work fine. this is the way with alot of the newer things,....good luck ... GE GLD5800L Dishwasher

Hello I'm looking for advise on my 11 year old dishwasher. It's a kenmore ultra wash model # 15812. The problem is that when you push the wash button nothing happens. The drain funtion still works and all the lights on the front panel work but no water is flowimg into the washer. Do I try to fix this or just buy a new one?


Hello there:To be honest with you i would first try these solutions and see if they work cause a new machine would cost a lot of money.But if you can fix yours it would cost a lot less so plese try these solutions that i have provid ... Dishwashers

Pulsing I own a Karcher 5.55m preasure washer which has now started pulsing. I have bleed the system but I believe I need to buy a new cylinder head - any ideas? or show me where I can locate a diagram to locate the part number?


... Karcher Pressure Washers

My Karcher 2.94 pressure washer has stopped pumping water through. It was only £80 and is 3 years old is it worth repairing if it needs new parts etc.


... Karcher Pressure Washers

Hello I have a built in DCS dishwasher - width 24" heigh 35". It started smoking out the front and the repair man said it needs a new control board. Is that possible or should I buy a new one. IT is not a dishdrawer its a full dishwasher. the top rack is also broken. If I need to buy a new one - where from - new jersey area


Http://www.thefind.com/appliances/browse-dcs-single-dishwasheryou can purchase online from here... ... Dishwashers

I need new upper and lower racks for my Maytag jetclean EQ+ MDB7100AWW. How much and how can I get them, Need to determine if it is worth the cost, or buy new DW.


Sorry to read about your problem, I hope this helps you out.upper rack is #99002037 $108.40lower rack is # 99002034 $187.36Try getting your parts here, www. ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1371 seconds