Having problems with your Kenmore 24 in. 16029 Built-in Dishwasher ?

I have a kenmore dishwasher model number 665.17039402 that just stopped working. I had to reset it a couple of years ago but I can't remember the code/procedure to reset it (and none of the other solutions are working from this site. Please help. Thanks.


Answers :

I can only guess but the sequence suggested is
\015\012
\015\012Press the following keys in sequence, do this within 5 seconds..
\015\012
\015\012\015\012
    \015\012
  1. \015\012High Temp Wash\015\012
  2. \015\012Heated Dry\015\012
  3. \015\012High Temp Wash\015\012
  4. \015\012Heated Dry
\015\012all the lights should come on the unit, wait 10 seconds then press cancel/drain..
\015\012
Does this help. If not let me know and I will check in more detail. I don't have access to the service manual right at this moment.
\015\012This situation could be linked to some problem with the heating system of the dishwasher.
Hi
\015\012\015\012
\015\012\015\012
\015\012\015\012Thanks for using FixYa. To resolve this you will have to\015\012reset the console. Do this by closing the door and press these buttons in\015\012sequence...
\015\012\015\012
\015\012-high temp wash

\015\012\015\012-heated\015\012dry
\015\012\015\012-high\015\012temp wash
\015\012\015\012-heated\015\012dry
\015\012\015\012
\015\012If this does not work then you’ll have to replace the control panel.
Please\015\012do accept the solution if the issue is resolved or post a comment for further\015\012assistance.
\015\012\015\012
\015\012\015\012
\015\012\015\012Thanks
\015\012\015\012Rylee
Repair Help & Product Troubleshooting for Kenmore 24 in. 16029 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a kenmore dishwasher model number 665.17039402 that just stopped working. I had to reset it a couple of years ago but I can't remember the code/procedure to reset it (and none of the other solutions are working from this site. Please help. Thanks.


I can only guess but the sequence suggested is \015\012\015\012Press the following keys in sequence, do this within 5 seconds..\015\012\015\012\015\012\015\012\015\012High Temp Wash\015\012 ... Kenmore 24 in. 16029 Built-in Dishwasher

We have a turbothermic Miele dishwasher...It tells me it has a blocked drainage outlet...took it apart ,no blockage,cleaned the pump area of any debris but all clear...I rang mile support and they told me to try resetting it ....I t did work and we used the dishwasher..but it has the same problem again ..cant't remember how to reset it ..


I hope this information will be helpful. ... Miele Dishwashers

I have a Kenmore undercounter dishwasher..model 665.16022400. The "normal wash" light keeps blinking..nothing will work on it..I tried reseting didn't work, killed the breaker for a while, didn't work. I tool the panel off and reseated the ribbon connection to the electronic board..didn't work. I'm not sure if I should be replacing the electronic board, or the control panel that contains the buttons. None of the buttons appear to be stuck. thanks - Andrew


Hi,This is a common problem. As i cannot diagnose the machine myself, it would be tough to exactly comment on the fault. However, more often it is an issue with control panel keypad assembly.You need to replace that.Let me kno ... Kenmore 16024 Built-in Dishwasher

I have a Dishlex Global 300 dishwasher that stopped working mid-cycle. I had to sponge out all the water. Now none of the buttons do anything and none of the lights come on. When I turn it on at the power outlet it gives a single beep, but I cant get it to do anything else. I've opened it up and there is no water or dampness anywhere inside. Any ideas?


It is your control board inside your dishwasher. ... Dishwashers

GE GSD5320 seemed to finish all light wash cycles. Then it began to beep, with the NORMAL light blinking. I hit RESET, but none of the other buttons worked. I threw the circuit breaker for this appliance and waited an hour. I Turned the circuit breaker on but now I get the NORMAL light blinking, even when the door latch is not engaged. No buttons work.


... GE GSD5320DBB Dishwasher

I have a fridgidair dishwasher model FDB4315LFBO and none of the buttons are working this is the second time this happened and last time i removed the cap for the rinse aid and heard a rush of air then everything started working. I already turned off the power to reset things and the PF light flashed until i opened the door then it went back to everything being dead.


Sounds like something has burnt in the main powerboard. ... Dishwashers

What buttons do I push to actually make my dishwasher work. The power blinked off and I cant remember what button to push to make it work. It is a GE stainless steal quiet 3 dishwasher


Try turning breaker off for about 2 minutes and then retry. This shold rest controls for you. ... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

Quiet Partner II Whirlpool Dishwasher 2 years old, used about 6 times in 2 years. Panel LED's flashing like a Christmas tree: Pots / Normal / Sani / Cancel lights all flashing Tried different resets as found on web but none work. Dishwasher was NOT being used when the flashing started. Need reset sequence if there is one.


Unusual LED or\015\012Display Readouts\015\012Open ID diodes and/or LED\015\012circuit(s) in keypad, or open\015\012ci ... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

My Fisher Paykel dw60cdw2 dishwasher stopped working mid cycle and I cant get it started again even aftre switching power off and pressing reset.. All lights on the console are working except the number display on the left side. What is the problem likely to be


Had the same problem and it was the microswitch that is behind the door skin which is associated with the lock mechanism. got a new one and away she went ... Fisher and Paykel Dishwashers

I have a whirlpool dishwsr. model GU2400XTPB7 that has been flashing the normal light and I cant use it for over a week. I turned off the breaker to the house for 30 min. & that did not work. I tried the reset sequence of Htd dry/normal, repeat, repeat & that did not work. If the push button "panel" needs replaced is it something that a "handyman" can do?


Hi Melinda,Thanks in advance for using Fixya.com. Now then firstly by pushing the heated dry and normal buttons then repeating is the proper procedure to reset the control board,below is a the exact buttons to push to reset the control. Also plea ... Whirlpool Dishwashers

GE dishwasher stuck in delay start mode. None of the other buttons will work including reset


... GE Dishwashers

I have a maytag mdb 9 dishwasher. The only cycle that will work is instawash. None of the other options light up when I push the buttons. Is there any way to reset?


... Maytag Dishwashers

Wont drain.water filled,never washed,then wont drain.I can hear motor for few seconds when i press drain,a click noise,then nothing.I cant remember the reset sequence.I have the kenmore ultrawash quietguard plus.thank you


... Dishwashers

I have a LG intello dishwasher 2050SH Turned it on yesterday and did a rinse. This was the first use for 4 months in our second home. It was very cold. The rinse stopped some way through and an error message displayed (cannot remember). Tried to run again and now the dsiplay is locked. It turns on with usual sound, but none of the buttons work. They make a noise when pressed but nothing on the dsipay changes. I suspect that the outlet was frozen and that I should not have tried again - too im


Hi\015\012\015\012To\015\012unlock the lock in your LG Dishwasher, with the door open press the SPRAY &\015\012RINSE buttons simultaneously for 15 seconds. Hope this helps...please post back fo ... Dishwashers

Ge profile dishwasher model pdw 9880l00ss can't be started or reset. The only indicator on the panel that works is the cycle time. None of the touch buttoms react when pushed.


... GE Profile PDW9880NSS Stainless Steel Dishwasher

My Whirlpool DP1040XTXQ portable dishwasher will not turn on. I've checked the plug, outlet, breaker, etc... I know there is a way to reset the keypad by holding down a couple of buttons at the same time, but I cant remember the right combination or how I learned it in the first place. It's not in the user's manual.


... Whirlpool DP1040XTX Portable Dishwasher

My GE Profile PDW7880G00SS dishwasher won't start. The timer display shows a zero and none of the buttons work (no beep when pushed). Any idea how to reset?


... GE 24 in. Profile PDW7880G Built-in Dishwasher

My KA Dishwasher model KUDSO2FR has the Normal and Light/China lights oscillating back and forth. None of the functions appear to work. Is there some other way to reset the dishwasher? Unplugging doesn't seem to do it?


Sounds like a bad prosser . but ck the ribbon from the touch panel /remove ribbin and clean end retry / if this does not work / replace prosser . **** hope this helper . feed back pls . ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Kenmore Model 665.15979992 (Elite) dishwasher: lock light blinks and none of the reset suggestions on your website that I've tried appear to work. Any thing else before a service call?


The blinking "clean light" is a common problem with some of the Kenmore and Whirlpool models dishwashers. The problem is usually attributed to water supply temperatures being too low when filling. Apparently, there are some issues w ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Is it possible to reset a Maytag QuietSeries 300 undercounter dishwasher? Suddenly, only a couple buttons and lights work. (none of which are the START button)


Hi,Have you tried to Disconnect the Power Supply for Few Minutes. This usually Soft Reset the Dishwasher.There is no Reset Button. If problem persists, you need to Replace Touch Pad which is a Common Issue on this Series. ... Dishwashers

Kenmore elite, im locked out and cant reset, no heat dry is not working to unlock get my wife off my back


I took off the lower panel and found some paperwork that gave option notes. under control lock it says "the Control Lock light is turned on and all keys of the keyboard are disabled wheneverthe control lock feature is involked by the customer. The Co ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I have a technika diswasher,not sure of the model, is approx 3 years old and has a big dial on the left hand side with 7 wash functuions and the power button is smaller and is on the RHS. I cant remember how to reset the wash settings. I thought that by pushing in the large dial this set the wash cycle but a technician told be that you have to hold your finger on the start/pause button until the green light flashes, and turn the dishwasher off then back on. Can you please give me a step by ste


I have the same model. You just turn the dial to the setting you want, push the dial back in, turn the (right) power button on then turn the smaller start button on. I use different cycles all of the time depending on whats in the load and this works ... Dishwashers

My dishwasher will not work..It's getting power but none of the lights or anything comes on..Is there a reset button on it or what can I do to fix it..


There are no reset buttons. if you have power to the panel or timer and still no operation then you need to replace the electronic control panel or timer ... Dishwashers

Have GE Monogram ZBD6880 dishwasher. Ran unit and unloaded. Went to use the next day, and none of the buttons to select and start will work- it is as if the unit has no power. I confirmed that there is power to the unit. Is there a way to reset, seems like it might be something simple.


... GE Monogram® ZBD6880NSS Stainless Steel Dishwasher

I have a Kenmore dishwasher, model 665.16039. Over the past month (we were on vacation 8 days over Xmas, but I assume it would have happened then, too) it has required rebooting using the Normal Wash - Heated Dry reset about 4-6 times. It would then do a couple loads okay, then need resetting. Now, however, it's refusing to reset to a point at which the Start buton will work. When I reset it, it flashes all the lights (incl. Start), and it fills, sprays, empties, etc. just as though it works


Make sure there is no water damage. ... Kenmore 24 in. 16039 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0783 seconds