Having problems with your Kenmore 24 in. 16032 Built-in Dishwasher ?

Load grinding noise, like the engine is working too hard.

\015 My dishwasher is making a grinding noise. My cleaning lady thinks it sounds like their is not enough water in it and yet the dishes come out clean? Any ideas?\015\012Thanks \015\012Jane\015

Answers :

Most likely the motor/pump assembly is worn out and grinding. If the machine is less than five years old it is under warranty. If over five years old, the repair part alone is about $150 not including labor.
Repair Help & Product Troubleshooting for Kenmore 24 in. 16032 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Load grinding noise, like the engine is working too hard.


Most likely the motor/pump assembly is worn out and grinding. If the machine is less than five years old it is under warranty. If over five years old, the repair part alone is about $150 not including labor. ... Kenmore 24 in. 16032 Built-in Dishwasher

Kitchenaid KUD124SE DISHWASER SUDDENLY STARTED MAKE A GRINDING NOISE DURING LAST DRY CYCLE. TRIED RINSE AND ALL I GOT WAS GRINDING NOISE. BELIEVE IT TO BE PUMP. NEVER WORKED ON ONE. FIRST ALL IS IT MOST LIKELY THE PUMP AND IF SO HOW HARD TO REPLACE? tOM


You most likely have either a piece of broken glass or hard food debris in the pump. There is a cutter within the pump designed to grind food debris and flush it away. However, you can take off the lower wash arm, remove the (recessed) s ... Dishwashers

I have a several year old honda gx240 engine. It has never been teched and now, all of a sudden it hardly works. Before this it would occassionally backfire but now I cant put any load on the engine or get any rpm's out of it. It was literally a overnight thing. Worked perfectly the other night and now it hardly runs. Any ideas? Anyway to adjust/clean the carb?


It sounds l may need a digapham or bowl cleaning ike a carborater problem it ... Honda 8 HP Engine

My Maytag Quiet Series 200 is making loud noises. It appears to be continuing the cycle. When we stop and start the washer, it sounds like the motor is working hard (high pitched sound). It sounds serious. I'd like to troubleshoot myself if possible. Also, what is the criteria for an 8 year old washer when it comes to the decision of fix vs buy new?


... Maytag 24 in. MDB6600A Jetclean II Built-in Dishwasher

My dishwasher has got loads of water in the bottom, I ladelled it out and removed the filters etc but couldnt find out how to remove the final one, it looks like I need a star shaped screwdriver?, tried a posi drive but this didnt work. when I switch it on it fills and makes the right noises for a bit and then stops and does a kind of ticking noise intermittantly.


... Neff 24 in. S5453X1 Built-in Dishwasher

So I found this power washer for sale. The seller claims that the washer generates a good stream of water, not just full power. He also mentions that after a few minutes the engine starts to bog down like it is working extra hard. Does this sound like a pump issue? Could something be clogged or would the pump need to be replaced? Or should I avoid this power washer?


Don't buy a power that doesn't work.There are many expensive parts on a power washer. If it was cheap and simple to fix, the seller would fix it and the washer would not be for sale.Would you buy a car that doesn't work? Especially ... Pressure Washers

My KitchenAid Model KUDE70FXSS 2 dishwasher is new to us today and has never been used before. It was hooked up professionally, but I assumed it would work, so tonight when I tried to run it, it lights up on panel, but it won't run any cycles. It will start putting water in the machine, but then cuts off. It starts making a grinding noise underneath the machine, and it clicks like it is trying to work, but the water doesn't wash. Hmmm. Anyone know what to do?


... KitchenAid KUDE70FXSS Builtin Dishwasher

The machine works fine, but about one out of every 4 or 5 times it is run, the detergent remains in the dispenser. The dispenser door has opened and the detergent is hard packed from having gotten wet. It seems like whatever is supposed to cause the detergent to be flushed out of the dispenser is not happening. Am I loading the dishwaher is such a way that the detergent is not getting out?


Most likely the top wash arms are blocked and need cleaning. But could be something more like wash pump not working well, etc.\015\012\015\012Need the full model number of the dishwasher. ... KitchenAid Dishwashers

Loud grinding noise sounds like something small and hard is getting caught in some kind of rotary. The sound comes from underneath the dishwasher at or near the motor. I screwed the big circular plastic filter on the bottom of the inside of the dishwasher, but found no significant debrie. It did not resolve the problem.


... Jenn-Air 24 in. JDB1090AWS Stainless Steel Built-in Dishwasher

Ge Monogram dishwasher motor make a loud noise after rinse. Sound like a load hum for a few minutes. Other than that its work fine.


... GE Monogram® ZBD0710NSS Stainless Steel Built-in Dishwasher

It makes a grinding noise in the middle of the cycle like it is stuck and can not get to the next part of the cycle. We have tried starting the cycle over, but that does not always work. MOD DU1055XTPQ4


... Whirlpool DU1055XT 24 in Builtin Dishwasher

I have a Sears (Briggs) 2550 washer mod # 580.752190, has been working great but when I got it out last week it wouldn't start with the water on, I turn the water off bleed the pressure out the wand and it started and ran great, I thought it might be the relief valve, I removed the valve turned on the water, a big stream was shooting out the hole where the valve goes, I started the engine and it ran but sounded like it was about half loaded. where do I go from here ? Thanks.


... Briggs Stratton 020273 Elite Series Portable Gas Pressure Washer

DD 603H Seems to work fine but has developed what sounds like a grinding noise. Any suggestions


Remove the rack out of the tub now twist the ring around the big silver plate and remove the plate now twist the motor and pull up and the motor will come out check for burs on the bottom of the motor it will be a gray plastic perpeller use a nife an ... Fisher and Paykel 24 in. DD603H W Built-in Dishwasher

I changed 2007 honda pilot alternator and serpentine belt, now the engine is making noises kind of like engine knock. I removed the belt and engine is still making same knocking noise.


... Honda 2007 Pilot EX-L 2WD

Grinding Noise This dishwasher, the "quiet power II", makes quite a loud racket while in wash mode. I would call it a grinding noise. Sometimes, I can hit the front of it and it will stop, other times not so. And even sometimes, we can do two or three loads and the noise doesn't happen. (not often)


This is a definite fix for this problem! I used one wire tie to afix the pipe from the back of the dishwasher to the middle spray arm and wa-lah! The annoying noise is gone! ... Dishwashers

Dishwasher is draining however the noise is constant and it sounds like there is resistance somewhere the noise is like a grinding noise?


It sounds like the water pump impeller has failed or the motor bearings have failed. ... GE Dishwashers

When the load is in mid-wash it smells like a fish cannery! The whols house will smell like fish. The dishes will all smell like fish. I put lemon and vinegar down the disposal and it worked for a few loads and now the smell is back!!


You might want to try adding a jar of "Tang" orange drink to the dishwasher and running it through a wash cycle.\015\012\015\012Empty the washer, remove the racks.\015\012\015\012Fill the soap dispenser with Tang and put the r ... Dishwashers

Engine dies every time i release my trigger the engine dies it is like the bypass isn't working the engine starts great and the pump works fine


... Pressure Washers

Smv50e00gb my dishwasher has stopped working. When i try to set it going it sounds like it is working then it sounds like a grumbling noise and then stops and bleeps that it has finished


... Bosch Dishwashers

I have a bosch shv99a13uc. i rescued this from a thrift store so i am not sure of the history . i have installed it . all the controls work . it fills and trys to work it dosen't spray much and grinds like a very loud timer what tests should i do and can i get a manual that shows me ho to get the pump out. I think it sounds like something in the pump any help would be great Thanks


Hello &\015\012Welcome to FixYa\015\012\015\012Please check\015\012this video on how to clean the pump filter:\015\012\015\012 ... Bosch 24 in. SHV99A13UC Dishwasher

Loud noise maytag quiet 300 series dishwasher making a loud grinding and screaching noise, sounds like plastic gears grinding on each other


Check for bones/glass/ceramic from chipped plates in the food chopper (for lack of a better term). You'll need to disassemble the entire lower arm unit. ... Maytag 24 in. MDB7600A Jetclean® II Built-in Dishwasher

MODEL#MWX233RES5 - Serial # XC: grinding noise in wash mode; has stopped working in wash mode- just a click when activating, but will work in spin mode while still grinding


HI. Ok, here the deal here; Your transmission will lock up soon. If it is not moving at all in agitation mode, it is already semi-locked, in a way. Frigidaire dose not sell the gear kits for this unit. with that said; i would inspect the hub to be su ... Frigidaire Dishwashers

Dishwasher is making a loud grinding noise when it's started. Doesn't matter the cycle choice; the cycle starts as normal then once started up starts making a sort of grinding noise as the water is pulsing, like something is stuck or blocking the "push" of water. I couldn't see anything stuck in the bottom - any thoughts before I call a repair person? I've never owned a dishwasher before - maybe there's a basic drain/blockage thing I should check out first? And, any recommendations for repair


... Maytag 24 in. MDBH970AW Built-in Dishwasher

Have a Kenmore Freestanding Dishwasher that was working when hooked up to the sink. When we plumbed it in and connected the electrical directly, we now get an "F4" flashing on the panel with a beeping noise and the pump sounds like it wants to drain but just get a sucking noise. I've tried putting water in it to prime the pump, but still doesn't want to work. Do the codes mean anything, or point to a specific part?


... Kenmore 24 in. 16332 / 16334 / 16339 Free-standing Dishwasher

Noise engin As soon as the dishwasher start... it is very noisy... a noise like some engin problem.


... Jenn-Air 24 in. JDB1100AWS Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1330 seconds