Having problems with your Kenmore 24 in. 16032 Built-in Dishwasher ?

Is it possible to convert a 60 Hz dish washer to work on 50 Hz, and how.


Answers :

Hello, so long as you have it wired to a 110v outlet 50-60 hertz is not going to be a problem and you don't need convert it. If however you are hooking it up to a higher voltage, you will need a step down transformer. If you have any questions please feel free to comment again. Mike
Repair Help & Product Troubleshooting for Kenmore 24 in. 16032 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Is it possible to convert a 60 Hz dish washer to work on 50 Hz, and how.


Hello, so long as you have it wired to a 110v outlet 50-60 hertz is not going to be a problem and you don't need convert it. If however you are hooking it up to a higher voltage, you will need a step down transformer. If you have any questions please ... Kenmore 24 in. 16032 Built-in Dishwasher

My dishwasher is not cleaning dishes... The cycles work but the dishes do not get clean an sometimes are more dirty if that is possible. I have tried adding jet dry and extra cleaning liquid but get no results. Also there are times that the bottom of the washer fills with water unexpectedly and will even leak on to the floor. It doesn't leak when the dishwasher is running... I just don't know what to do other than clean out the spray arms. Please help.


Best off to call a certified repair company such as Sears. ... Kenmore 15899 Built-in Dishwasher

My dishwasher is not cleaning dishes... The cycles work but the dishes do not get clean an sometimes are more dirty if that is possible. I have tried adding jet dry and extra cleaning liquid but get no results. also there are times that the bottom of the washer fills with water unexpectedly and will even leak on to the floor. It doesn't leak when the dishwasher is running... I just don't know what to do other than clean out the spray arms. Please help.


Hi,Check your heating element.. Dishwasher ... Kenmore 15899 Built-in Dishwasher

Probe and swich is not working properly.There is four cable, 2 black..its working.other 2 cables Red not connecting.When i short the cable system is working. My hobart dish washer is old I dont know the correct model no.But the part no. is 00-271621 pls replay me as soon as possible I bought a new probe and switch that also same condition.


... Hobart AM15-6 Dishwasher

Smeg df612sdx dish washer - 'P' programme button not working


... Electrolux Frigidaire Professional Series 24 in. Built-In Dishwasher Dishwasher

We have been using this model since Sept. 2007.When new, it worked very well. It has over time, performed less then we would expect. Not only do we have to scrub dishes by hand before placing them into washer,they some times require hand washing after being washed by machine. Not only are they dirty, the glasses are covered with a cloudy white film. We have not done any maintenance or service to this dish washer. Does this washer require some sort of service or attention. Please advise. Thanks


... Jenn-Air 24 in. JDB1250 Built-in Dishwasher

I have a Kenmore dish washer model # 363.14051692. This dish washer was working fine and someone stopped it in the middle of a cycle. After that, we can't get the washer to start back up. Where is a reset button on this model, or is there one?


... Kenmore Dishwashers

I got a whirlpool dish washer Adp4407. When the machine is switched on it carries out the cycles but seems that the hot water cycle is not working and the dishes are still unclean even after completin


... Dishwashers

Samsung 9E Error - Low Water Level. Dishwasher has worked fine (10 months old). Confirmed adequate water supply/availability. When opening the dish washer after error, the inside has no standing water. I can hear the dish washer initially fill. This happens later in the cycle (maybe 10 mins in) Should I replace the fill switch/sensor. Is there any info available on how to fix it my self. Appreciate your help!


... Dishwashers

Dish washer won't kick into wash mode . heating elements work, water filled up in bottom of dishwasher and won't drain. All buttons work but won't wash dishes


First check you float valve. Look inside the machine on the floor will be a small float valve. Looks like a small upside down cup. Lift it and clear anything from underneath. The valve is a safety feature to stop the mac ... Whirlpool Dishwashers

Kenmore Model Ultra Wash Model 665- 45955 Problem: Dish washer leaks at bottom intitially during sudding cycle only...first 5-10 min... then no leaks/drips thereafter thru balance of clean/rise cycle. Whats up....Thought possible seak around washer door is bad but no leaks at bottom or elsewhere after the sudding cycle is completed. Please provide complete resolution reply if possible Tx


Hi\015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If you have water leaks around the base of your dishwasher,\015\012you may be using a detergent that is causing too much suds. Cut ... Kenmore Dishwashers

Dish Washer we are having a problem with like a chalky residue left on things after the dish washer has finished. we are using 5 in 1 tablets with no rinse aid but salt as we are in a hard water area and this is what the manifacture of the tablets recommended. the mashine seems to be working ok and we have taken it to bits and cleaned it thoroughly.


The problem is not the dishwasher but the water that actually is going into it. the white, powder substance is because of hard water. there is a affordable product out there called the dishwasher filtration system. it will filter the water going into ... Zanussi 24 in. DE6744 Free-Standing Dishwasher

The top jet washer in my dish washer is not rotating and cleaning my dishes. The bottom is working well. I am just wanting to know what the problem might be.


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

My dishes and glasses do not come out clean they appear to have some white residue on them...my water softner is working I am using liquid dish washer detergent and jet dry......just feel the washer is not good but is no more than 7 years old....any ideas


If\015\012your dishes or glassware appear with a white residue or spotted following a complete\015\012wash cycle, adjusting the amount or type of detergent you?re using and\015\012adjusting your hot water heater?s water temperature may solve th ... GE Dishwashers

NOT ENOUGH WATER FILLING UP IN WASHER. EVERYTHING ELSE WORKING BUT DISHES NOT GETTING CLEAN AS NOT ENOUGH WATER RELEASED INTO WASHER AT START. WHEN I ADD TO POTS OF WATER IN THEN WORKS FINE??


The presostat or whater level sensor is not good ... Dishwashers

Have a dw8w kleenmaid brandt dish washer, lost all warning lights on front paneal. dish washer still works ok but dont know what sical its on


... Dishwashers

Frigidaire built in dishwasher model PLD2855RFC1. Have to wash dishes pretty much spotless prior to using dishwaser. Glasses come out with what appears to be soap residue regardless if powder or liquid. Did not use a gauge but water pressure in rest of house is good, recently replaced water heater, pressure regulator and just replaced the dish washer water source valve. Washer is about 18 months old, has never worked really well.


Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Frigidaire PLD2855RFC Dishwasher

My electrolux dish washer model eidw6105gso stopped before it completed the cycle. All the selection lights were flashing and i could not get any functions to change. I killed the power at the breaker to try to reset and that didn't work either. I removed the panel on the front on the bottom to see if there was a reset button and found another display that is showing a light on the turbidity location. what is this and what might i do to get my washer back working?


... Electrolux Dishwashers

IDW450 dishwasher starts working then after about 7 minutes stops - beeps about 6 times and stops completely - the dishes are wet but the dish washer tablet door is not open . - can anyone help - then on the odd occasion it works perfectly without stopping but this is getting less frequent . Can anyone help please .


There is probably a leak under the tub., Water drips into a catch pan and sets off the beeping. Take the kick panel off the bottom front and see if there is any water in the pan. If there is you can drain it or blot it. BUT this is an indication of a ... Dishwashers

Got a new Kenmore dish washer in mid January. Worked fine for a couple of weeks then so-called "clean" dishes were covered with a residue from, I assume, was the dishwasher soap. I tried cascade action pacs, then cascade powder and finally, cascade gel. Nothing helped. I ended up having to use SOS pads to get the "crud" off of the dishes and silverware, and use regular dish soap to hand clean each dish and saucer and bowl...as well as each knive, spoon and fork! I have finally stopped u


Hi \015\012 \015\012Add some vinegar to each load along with the detergent you are using, also stop heat drying your dishes. Never use liquid or gel detergent .Dishwashers have some delicate parts a ... Dishwashers

Hi i have a whirlpool dish washer - model : ADP4731/5 , AAA class . I keep getting a F7 error message and it is not allowing me to turn the washer on , if i hold the start button down it allows the washer to go for 30 seconds before the error comes back up and it stops working again


... Whirlpool Dishwashers

I have a ge dish washer model gsm1800jbb and the handle latch (WD13X10030) had to be replaced...well it took a while to get it in and now we are not sure how to wire the wires. There are 2 white and 2 black and 6 different prongs so I am not sure which way to plug them in to make it work properly. It worked fine before it got stuck closed and wouldn't open, that's why we ordered the whole assembly. The way I have it wired it sounds like its working...water goes in and drains put but the


... GE Spacemaker 18" Built In Dishwasher - GSM1800JBB

Dirty dishes on Maytag 24 inch dishwasher, model no MDBH940AWS, Dishes have caked on gunk on the glasses after washing. The gunk is usually at the bottom of a glass (which is in the dishwasher upside down). How do I get my dish washer to work again?


This dishwasher has a circular filter path under the bottom plate - 6 screws - that can become filled inside with debris - you can remove it and wash it out with a garden hose.. Paul ... Maytag 24 in. MDBH940AWS Built-in Dishwasher

Spotty dishes Hi. I recently bought a new home only to find that we have very hard water.( I believe it was 23) Unfortunately, we do not have a whole house filter/softner yet, and it affects everything. Right now I am wondering if I wash my dishes in the dish washer with vinegar, will that work to get them clean and eliminate the hard water spots and clouding? Also, do you have any suggestions for doing the laundry? I have gotten filters for my showers, since it felt like I was swimming every t


Hi, there is a new product out that is affordable and works great. it is a filter system just for your dishwasher. you can get it at dishwasherfilter.com. i have it and after the first load was blown away how clean my dishes got. ... GE 24 in. GSD2000Z Built-in Dishwasher

Upper rack is not cleaning. Greasy dishes on top seem that dishes are not being washed. Seems the upper water turning dispenser is not working, Bottom rack seems ok. I guess I only have half a dish washer ?


Check the upper arm for free spinning, then remove the arm and check that the seam between the upper and lower halves has not split somewhere. Also check all the small holes for debris plugging. Run the machine in wash cycle for a little while with t ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1388 seconds