Having problems with your Kenmore 24 in. 16302 Built-in Dishwasher ?

Not draining properly...torn black round seal


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 16302 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Not draining properly...torn black round seal


... Kenmore 24 in. 16302 Built-in Dishwasher

The drain seal in the bottom is ruffled all the way around so the water doesn't completely drain, black gunk collects around it. Isn't the seal supposed to be flat?


No,if by seal you mean hose or pipe then thats just they way it's made.It's unfortunate the gunk collects on it.perhaps flushing the machine through with a quality dishwasher cleaner will help with this. ... LG 24 in. LDS 5811 Built-in Dishwasher

I have the GE 206c1513p001 Potscrubber and recently found a black seal or rubber band in the dishwasher. Since then, it has been making a continuous clicking noise when it is run and does not clean the dishes thoroughly. I am trying to find a manual or something that may tell me where this seal belongs so that I can fix this issue. The bottom of the dishwasher is also not draining completely. Please help! Thanks!


I have the exact same problem!!! Found 2 loose rubber bands, the bottom doesn't drain completely, and the dishes are left either dirty with a white film on them. Please help! ... GE Dishwashers

Model 665.17032403 No lights. Washed then quit before draining out. now no power. I cannot find the fuse on the electronic panel. What color are the wires leading to it? I see Black/black wires leading to a small round black thingy.


... Kenmore 24 in. 17032 Built-in Dishwasher

The seal for the pump drain valve shaft leaks


... GE Nautilus 24" Built-in Dishwasher

I have a purple rubber band looking seal and a clear round seal laying in the bottom of my dish washer...where do they go? The clear round seal looks broken. thanks


... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Don't know the brand of my jetted bathtub, which blows water. The round on-off dial just stopped functioning - stuck in ON mode. Using GFIC, it turns on & off just fine, so problem is with the round knob. Unassembled dial and removed. Have piece that turns, round at top, narrow flat at bottom with a little black metal wheel that comes out. Wheel function not clear, given how dial turns unrelated to wheel. Inside hole, all plastic. Center spike fits into removed piece with wheels. 2 black pl


Ok this is not that easy to picture, any chance of emailing photo?([email protected]) the electrical connections will be somewhat remote to the dial so as to isolate the wet user from the power! can you after switching off at the breaker, get behi ... Dishwashers

I have a model 665.1576 or 1676 my paperwork does not have the number on it and no part number on he machine, but I ordered parts from the catalog which matched. about 7 years old, stopped draining, so I changed the Seal kit, pump base seal, impeller, plus drain cover gasket but not the pump gasket could not find it, reinstalled, pump works but much slower and times out, have to hit drain button to get all water out. Keith


... Kenmore Dishwashers

Have a leaky gate valve shaft seal that I want to replace myself (part # WD8X181). It only leaks when in the drain cycle. Repair manuals are not available for this model. How much disassembly is involved to replace this seal? Do I need to gain access to the shaft from inside the housing pump assembly (drain sump)?


... GE Dishwashers

Have a GU1500XTK whirpool,took apart and in the small round hole in the sump i found a small black round soild rubber disk,i dont know where it came from or where it goes..diagram only shows the other black flap.


Its the check valve. it goes in a rectegular with the round edge first. its near the hole going to the pump ... Whirlpool 24 in. GU1500XT - Multiple Color Built-in Dishwasher

I have a leaky gate valve shaft seal that I want to replace myself (part # WD8X181). It only leaks when in the drain cycle. Repair manuals are not available for this model. How much disassembly is involved to replace this seal? Do I need to gain access to the shaft from inside the housing pump assembly (drain sump)?


... GE Dishwashers

Drain problems I have a Kenmore 665.17292992 portable dishwasher. I've changed the filter and the seals however it still does not want to drain. It will drain but extremely slowly and since it's on a timer, it only drains maybe 10% of the water out. My next step was/is going to be the Check Valve... but I am at a loss right now. I thought for sure it would be the filter. Any advice would be appreciated. Thanks, PM


This may not be the solution, but look for an air in-take somewhere on the top/back of the unit. It's probably covered by a stainless steel cover that can be taken off. Unscrew this cover and see if the air intake is blocked with lint. This is usua ... Dishwashers

GSD4000N Dishwasher not draining. I removed the sprayer arm, the round flat screen, the cage over the drain and the other plastic fixture that sits down in the drain area. I found a white ball sitting in there. I can also put fingers on something down there that is kind of like a wing nut that spins but doesn't seem to loosen anything. I'm officially stuck. Any help appreciated.


... GE 24 in. GSD4000J Built-in Dishwasher

I noticed the black residue on the clean dishes.also anwhen I checked I saw the bottom of the door seal breaking down, melting so as the seal around the center filter. I was washing in high temperature always. This started after 5-6 mo. What causing the seal melt? The dishwasher is designed for 160 F hot water than why is melting? Modell MDB8951 SS


I had exact problem with a similar model.Mine was about 8 months old. I could have ordered a replacement seal but it would have done the same thing after a few months (according to the shop where I buy/order anything that runs on electricity, most an ... Maytag 24 in. MDB8951AWS Stainless Steel Built-in Dishwasher

I have a whirlpool dishwasher model du915pwsq0 a piece of the silverware rack broke off fell down inside how do i remove the black center ring to get to it i remove the spray arm and the piece under it but the black round piece will not pop out when screw is removed


... Whirlpool Dishwashers

I have a dishwasher (cdu8000v) and it's leaking. Its leaking around the bottom of the door. It looks like the black seal is has a grove in it from door shutting. Can I replace the seal or is there a different problem. thanks! Toby


... Crosley Dishwashers

How do I reinstall the pump seal? I have old KitchenAid KDS-16 dishwasher. The drain impeller failed and I purchased a new kit. Disassembled the pump. Installed the new pump seal but it does not hold water.


You may have tilted the seal when installing so take it apart again and make sure it is all the way down in its bed and it streight to the shaft . and looks centered then reinstall all other parts and try again .. mm h ... KitchenAid Dishwashers

Bosch dishwasher = machine on but no water, so the lower basin has water in it and because of it the FLOOD CONTROL SWITCH IS ON, so how do I drain the rest of the water so the FLOOD CONTROL SWITCH goes off? A plastic cover with a seal is stopping me from drain the water below?


If you can see the water use a shop vac if not you will have to pull the unit out and remove the left side panel after removeing the water you will need to find the leak that caused the bottom to fill with water ... Bosch 24 in. SHU66C05 Stainless Steel Built-in Dishwasher

I have a LDF9810ST that I'm trying to replace a broken drain line. The old part number is AEM39700301 and the new part number is AEM69493803. The new part is made with a plastic u-shape plastic piece with a black hose that comes off the top of the u-shape plastic. Where does the black hose go?


Hey Glenn. Did you ever figure it out? I am about to replace my mother's hose since it cracked and I am looking at the service manual -but am I little stumped. I don't have the dishwasher in front of me with the part so I can't explore the options. ... LG LDF9810ST Built-in Dishwasher

How to clean black residue out of the filter, dishes and drain hose in my Whirlpool dishwasher. Model No. DU810SWLUO, Type No. 280-0. How to prevent black residue from building up in the dishwasher.


There are could be several reasons for the black residue you mention.\015\012\015\012Not sure of the age of the dishwasher, but most common could be the quality of water used or if aluminium dishes are washed. \015\012\015\012 ... Dishwashers

I'm having problems with the drain pump constantly running. I understand so far that it'll be the anti-flood device that is causing this. I've taken the dishwasher out and tipped it backwards to drain as much water out as possible but nothing comes out from anywhere ! It appears to be a sealed unit so how do I get to the appropriate part and fix it ? Cheers !


... Neff 24 in. S5453X1 Built-in Dishwasher

Whirlpool dishwasher Quiet Partner II DU1100XTPQ7 Mine runs but will not drain. Took it apart and cleaned out as much as I could around the trap, but could not figure out how to pull out the sump and seal. I believe it may be clogged but need to know how to pull it out or possibly reset it so it will drain.


I have a simular problem but everything quit working even the lights. Is there a reset button. Ive checked to make sure there is power supplied to the dishwaher. Please help. ... Dishwashers

Our Miele Incognito G843 SCVi dishwasher was shipping backwater from the sink drain. I found a rubber band in the non-return valve that might have been preventing a seal of the ball joint. However, now I get the "Drain Fault" error when I try to run. Is there something I need to do to re-establish pressure first? Or is there some other problem?


You'r right on / ( shipping "? - like backing up from disposal or from sink .) the one way valve ( very common ) is used to prevent this type of problem . I would think that if rubber band held ( "non return valve open) then ... Dishwashers

How do i drain the water from my diplomat adp8352 slimline dishwasher ? ive took the front black small panel off but can only see electrics. Im hoping draining the water will get it working again . Its stopped working !


... Hotpoint 18 in. DC28 Slim-Line Built-in Dishwasher

EDW5500DSS wont completely drain water Okay so now that my dishwasher runs, when it finishes a cycle it has a nice puddle of water at the bottom that never drains completely out. I am assuming its a relay or something because I looked for a floating switch (did not find), I can hear a pump sound as if it wants to pump the remaining water out, but, it doesn't. I really want to solve this problem soon so I can order the new door seal and needed part together. Checked the line out and of course i


The srainer over the pump could be clogged not letting the water drain quick enough. Be sure the screen is cleane out. I believe you would have already checked and cleaned this. I believe it is the impeller on the pump that pumps the water that is ei ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0971 seconds