Having problems with your Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher ?

The little actuator type motor in the dispenser goes off buzzing like crazy and its random. This motor is used to open the dispenser door. I bought a replacement dispenser assembly which includes new motor and it still has the same random buzzing sound. Would this be some type of issue with a relay or something?


Answers :

Hello.
\015\012Thank you for using Fixya.
\015\012
\015\012this is the troubleshooting of your problem:
\015\012
\015\012
  • Unjam the motor \015\012
  • Unjam the pump \015\012
  • Test the motor \015\012
  • Test the motor start relay \015\012
  • Check the drive belt
  • \015\012
    \015\012Pease accept solution Sir.
    This would not be a problem with the motor as you have changed it. This will most likely be a power supply problem or a main board control problem. You will need to get those checked.
    Repair Help & Product Troubleshooting for Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

    Tips for a great answer:

    - Provide details, support with references or personal experience .
    - If you need clarification, ask it in the comment box .
    - It's 100% free, no registration required.

    Suggested Questions/Answers :

    The little actuator type motor in the dispenser goes off buzzing like crazy and its random. This motor is used to open the dispenser door. I bought a replacement dispenser assembly which includes new motor and it still has the same random buzzing sound. Would this be some type of issue with a relay or something?


    Hello.\015\012Thank you for using Fixya.\015\012\015\012this is the troubleshooting of your problem:\015\012\015\012Unjam the motor \015\012Unjam the pump \015\012Test t ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

    Loud buzzing noise throu8ghout cycle. Sometimes washer sticks in wash mode


    It appears your timer/main controller/CCU has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites bec ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

    Loud buzzing noise throu8ghout cycle. Sometimes washer sticks in wash mode


    This is most likely not a problem with the motor since you have changed it with a new one. This is most likely a problem with either the power supply board or the main board that is controlling the motor. You will need to get those checked to see if ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

    It is 3 years old and 2 months ago I had to have a new motor fitted. 2nights ago I put it on and in the morning it was still going. I have tried again and it just keeps going. The water is slushing round but it is cold. Also the soap dispenser didn't open. It doesn't drain or dry.


    The control circuits of the unit is malfunctioning. It is probably a bad capacitor in the unit that has to be replaced. The control unit is the brain of the system. It will have to be replaced.Before doing so, check to see if you have any ... Siemens Dishwashers

    KUDSo1Ijbs1 dishwasher stopped cleaning. Counter continued to 0. Tech came to house said I needed new motor, which I did replace and still won't clean. Soap dispenses, but does not dislove. Last t


    ... KitchenAid Kitchen Aid Diswasher Part 4171958 Timer

    The dishwasher is making a "buzzing" type of noise. I've taken out everything and it's still doing it--seems to be coming from the motor.


    You'll need to clean and possibly replace the chopper and/or impeller.To get to the chopper you need to remove all parts you can from the pump assembly inside the dishwasher.To get to the impeller you'll need to pull the dishwasher out and remo ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

    Buzzing sound we have a gold quiet lll edition , it is now buzzing when we start it. we have had a repair man here twice each time he has taken it apart and cleaned it. he has said because we have hard water, the water oxidized and some sediment has broke though the seal into the motor and now we need a new motor. does this sound right? we have had dishwashers from whirlpool for years prior. never had to change a motor. please can you offer some suggestions? thanks very much desperate in Mexico.


    If buzzing while it is washing then probably is a motor problem but mostly not from hard water just poor quality parts ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

    Good Morning, I don't need any help except to get rid of my lg dishwasher because it is the worst dishwasher I have ever had!!! I have had it fixed once(new motor ,new soap tray,new board) and it still does not work good and still smell like it is burning up. I have not been as unhappy with anything in my life. WISH I HAD NOT HEARD OF LG AND WASTED A LOT OF MONEY!!!!!!!!!


    Hi,You might be interested in this.....http://www.contacthelp.com/directory/Shopping/Electronics/LG?ListingID=386heatman101 ... LG Dishwashers

    I have a Delonghi DW67S dishwasher which I have been using for about 2 months now. It has been 3 washes now that the dispenser hasn't opened while washing leaving the detergent still in the dispenser. I have replaced the detergent with a new one from a different batch but the same problem. I have also chosen a different washing cycle to see if it was that particular cycle I was using but still the same problem.


    ... Dishwashers

    DETERGENT DISPENSER I'M NEW TO THE WORLD OF DISHWASHERS AND JUST MOVED INTO NEW HOUSE WITH EXISTING DISHWASHER, OLDER TYPE BOSCH (MODEL UNKNOWN). DETERGENT DISPENSER WILL NOT OPEN DURING CYCLES, HOW CAN i FIX THIS PLEASE? ALSO DO PLATES ON BOTTOM DRAWER FACE INTOWARD THE MIDDLE OF WAHSER OR AWAY TOWARDS THE WALLS? WOW, I DO SOUND DUMB!


    Hi \015\012the plates and bowels should face into the center of the dishwasher, the spray arm spins at the top and bottom from and sprays outward, check that you are using the soap dispenser and not the rince agent cups, also check to make sure it wi ... Bosch 24 in. SHU43 Built-in Dishwasher

    My ge profile dishwasher is making a buzzing sound from the pezio buzzer on the control board. This started after a power outage. I verified power and ordered a new control module. After installing the new part it still buzzes and does not function.


    ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

    Working on a Whirlpool dishwasher DU915PWSS0 - The soap dispenser won't open automatically. We have replace the wax motor and have installed a new control board. When you pull up on the draw bar manually the dispenser door opens perfectly. I don't have a schematic and I don't have the test sequence so I can't run the diagnostic test. It's a blind assy process so you can't really tell if you have the draw bar over the wax motor and coupled. I need the schematic and or test sequence for the E


    Please confirm if this is the model you have.\015\012\015\012I might have some access to th ... Dishwashers

    Hello, Firstly, thank you for what you do, you help so many people and I know it takes time. I have a Bosch SHE44C06-UC Dishwasher. I fixed the E1 (Heating Circuit) error. First, before I found the writeup about the solder joint, I bougut a new heater and replaced it, ithe part included the element, flow switch and high temp sesor soall are new, then I fixed the solder and E1 went away and the cycle finsihes and the dishes are clean and dry. Still I check the error codes and still have


    ... Dishwashers

    Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?


    ... Dishwashers

    My Maytag model mdb9600aws motor shaft seal is leaking. How do I remove the seal and replace a new one. I am a novist, but I have taken the motor completely out and replaced the seal / gasket that the motor sits in, but there still is a leak. I am afraid the leak is going to destroy the motor as it has corrosion / salt like stuff about the motor. I have attempted to pry the shaft off with the use of 2 screw drivers. I was thinking since I am going to replace the whole motor shaft seal and chop


    You are wise to realize the leak would destroy the motor.Take a close look at the diagram to see everything that gets placed on the motor shaft. That should give you a good idea what can/must be removed from that shaft. ... Maytag MDB9600A Jetclean II Built-in Dishwasher

    I have a Neff dishwasher S6409N1GB/09 and for the last 3 months engineers have been out to fix it but it still does not work. They have fitted a new motor, new pump, new circuit board, new fill tube, new breather, can you advise what the problem could be, because the engineers have given up on it, help. Mr Dave Gallagher


    ... Neff Dishwashers

    I am getting a buzzing noise from my electric motor. i tried changing the capacitor but still no change. The motor starts up sometimes but starts making a noise.Isusupect the winding or a bearing in the electric motor. How do I strip the motor from the pump?


    First thing you must check the machine with load, without load with water fed, and without load with no water fed. Then check the simpler cause. See if the cooler fan is hitting the casing.\015\012If you check machine without pressure load and ... Karcher PSI Electric Pressure Washer

    Blown Motor DW is about 16 months old. Started making some real bad noise. Lasted about a minute and then had a death howl. Called in repair tech who says motor is blown. $399 for repair which includes $125 for the part. I've rebuilt car engines, so can probably replace a DW motor. Any insight on how to replace the motor? is it worth paying 275$ for labor? Just bugs the hell out of me paying $400 bucks for a repair when i can get a new one for $450.


    I haven't changed that particular brand of dishwasher motor, so I cant give a step by step, sorry. I do know the other brands it is optional to get the motor alone or the motor with the pump assembly attached, so you may want to ask abo ... Maytag 24 in. MDBH950AWS Built-in Dishwasher

    Soap gets stuck inside the soap dispenser, so that at the end of the cycle, there is a clump of soap still in the dispenser. We have also noticed that the rubber seals at the back of the dishwasher (the ones that the spin arms plug in to) are getting worn. Will get new gaskets this week, but wondered if the soap dispenser isn't another problem.


    ... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

    I have a new Whirlpool dishwasher. It has been working fine until a couple of weeks ago when all of a sudden I've been having a problem with the soap dish not opening and dispensing the packet of detergent. What should I do to solve this problem? I have run the cycle through three times and it still won't disolve the packet. The dispenser opens, but the packet is only partially disolved, leaving the dishes not washed. eileen mueller, glendora, ca


    I suggest using detergent and jet dry....w/p doesnt sugg packets due to this issue ... Dishwashers

    Hotpoint hda3440g02sa leaves a little water at the bottom of the dishwasher I have checked the check valve have even replaced I have put a high loop in the drain hose and still no help it leaves just a little water I hate to put a new pump because I have on this type of dishwasher before and still no help


    Hi\015\012\015\012 \015\012\015\012When the dishwasher leaves just a little water and drains\015\012maximum then I would say that it is fine & the drain pump is also working\015\012fine. These units are designed in such a way tha ... Dishwashers

    I have a Kenmore dishwasher Model # 665.1376 which has always been a quiet unit. This dishwasher is about 4 years old. Now the dishes still come clean, however the cycles have a loud hum to each except for the dry cycle. Could this be a bearing in the motor, and if so how expensive is a new motor?


    ... Kenmore 13763 Stainless Steel Dishwasher

    I have a Husky 2600 PSI power washer with the Honda GCV160 engine that I can't get to start. It was okay when I purchased it from Home Depot last spring but now I've tried putting new gas in it, spraying carb cleaner, new spark plug, and it still won't start. I only ran it for about 30 minutes when I first purchased it. The guy at the service desk at Home Depot told me that the water hose should be attached and turned on while trying to start. Is this true or would this be starting the motor und


    You can eliminate the motor by unbolting the pump from it and then if it will start the problem is with the pump or the unloading valve.If it does not start with the pump removed then you check for spark and get the carb cleaned or have a kit put in ... Karcher 2500 PSI Pressure Washer

    FDW60 dishwasher Hi My dishwasher is about 15 months old and the problem I have is that it seems to stay on pump and the Ecco45 light is flashing.  A repair company looked at the machine and said that the motor looked like it was leaking and water was getting in the bottom setting off the micro-switch.  He contacted Hotpoint who fitted a new motor today at a cost of £89.85.  Went to use dishwasher tonight and we still have the same problem.  The dishwasher started the washing programme for about


    I've just (as of 10 minutes ago) had the same problem. I followed the advice given elsewhere in this forum and removed the bottom cover - water running out so needed a big towel to mop it up. I stood the machine upright and restarted it - no problem! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

    Whirlpool gx2500 whirlpool dw has had repeated repairs / new pump and motor/ new sensor/ but still will only go thru about 20 mins of the cycle, and then the CLEAN light flash,it will onjly restart after a bypass. what is the proper repair now? i thought my repair man knew what he was doing, but im no longer sure


    Clean light blinkn can be a number of things, ranging form bad heating element, possible bad door latch( not maintaining contact through cycle) motor and sensor could also cause this( but now changed they're ruled out.. in order to correct this issue ... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher
    • Start your question with What, Why, How, When, etc. and end with a "?"
    • Be clear and specific
    • Use proper spelling and grammar
    all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
    Load time: 0.1273 seconds