Having problems with your Kenmore 24 in. 17032 Built-in Dishwasher ?

Part of the top spray arm has broken off (#3378144) of my ultrawash kenmore 665. Where can I find that part to replace it?


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 17032 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Part of the top spray arm has broken off (#3378144) of my ultrawash kenmore 665. Where can I find that part to replace it?


... Kenmore 24 in. 17032 Built-in Dishwasher

The top spray arm of my Frigidare model FBD4315LFC0 Aqua Surge dishwasher fell off. Their appears to be a missing part. I've been searching online for a schematic and can't find one thorough enough to use. The parts I have are: 1. The top sprayer arm (the one in the top of the tub) 2. The two piece plastic keeper ring that appears to fit into the top of the spray arm. 3. A small white grommet looking item that fit inside the keeper nut. 4. The keeper nut that screws directly onto the wate


Hello there:hey sorry i keep getting disconnected i will be back on really soon i need to find out what is going on i hope these things that i have discussed with you is helping you out the parts are not as hard as they look once yo ... Frigidaire 24 in. FDB435RFR Built-in Dishwasher

I have a KitchenAid but model # KUDI24SEWH1. Can not find it on your list although another model without the last letters 'WH1' is on it. Anyway, my nephew ordered the parts he said needed to be replaced. One was the top water feed tube and bearing which he had no problem replacing when the part came in. But, he is having a very difficult time opening up the front door to replace the soap dispenser. Removed the 6 screw (three on each side) and the two at the top of the door but that is as far


You don't Use the WH2 just the first 6 letters and numbers.\015\012Jim ... KitchenAid KUDI24SE Built-in Dishwasher

My Kenmore Elite dishwasher 630.1630 9400 (possibly made by Bosch) has a bottom rack spray arm a top rack spray arm and a missing sprinkler on the outlet at top of unit (ceiling it the cavity was a room). What part number is it? Can I post a picture? thank you


... Dishwashers

Hi I have a Nemo Dishwasher and the top spray arm is not turning. The bottom one is going fine and there is certainly plenty of water getting into the washer as I opened the door with the washer going and it flood me. I can see the water getting into both spray arms - the bottom one has a excellent upward spray and turns - the upper spray arm has water getting into it but it will not turn. I have cleaned the dishwasher out and any internal parts that I could find so it is spotless - this is so f


... Fisher and Paykel DS602 Dishwasher

Hi, I am looking to find replacement parts for the top rack glider wheel and screw on the right side of my dishwasher. Model # mdbh970awq. I have found parts break down web sites but none seem to have the part I need. Thanks for the help.


... Maytag 24 in. MDBH970AW Built-in Dishwasher

I have a Kenmore Ultra Wash Dishwasher model 665.16379301. The spinner from the top of the dishwasher has come off. I have a replacement part but need to know what is required to replace it. Do I need to remove the feed tube assembly in order to replace it?


... Kenmore Dishwashers

I am wanting to get a replacement roller assembly(plastic unit with 4 rollers) that clips on to the side of the top load drawer. I'm able to replace it easily if I can find out where to get the part.


HI. There seems to be an issue concerning the model number that is post above your question. The number is question is EDW194E. This is unfortunately not showing up as a current or viable model number. This may be because your unit has been discon ... EuroTech 24 in. EDW194E Built-in Dishwasher

How do i put the lower spray arm back together? I had to replace the top screw part and it seems to stand up to high. I have a small white plastic ring, a larger white split ring and the arm itself. I have tried every configuration to put this back together but it is not right - the new "screw" part number is the same as the original.


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I bought the Kenmore 665.110729521 about 5 yrs ago. Yesterday the two plastic pieces which attache to the top rack and slot into a plastic piece on the tub wall, broke and the whole top rack fell down/dropped. Anyone know what these parts are called and if one can purchase replacements for them and if so where? Appreciate any help.


... Kenmore Dishwashers

Upper spray arm fell off, can not repair nor find part


I had the same problem, but was able to find the replacement part at http://www.partselect.com/shipping.aspx. My old arm also has the number 1544681 on it. If nee ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Kenmore dishwater top spray arm doesn't spin 587.14302200 or 9200


... Kenmore 24 in. 15932 Built-in Dishwasher

The wheels on which the top rack rolls in and out of the dishwasher have broken so that the rack is no longer operable. The machine works fine and I hate to have to replace the whole dishwasher because some plastic inside has broken, but I am unable to find any place that stocks these parts.


... Equator SB72 Built-in Dishwasher

Have a Kenmore Elite Dishwasher (66513123K701). Was not cleaning dishes very well so we ran diagnostics on it and found a problem with the diverter motor (W10155344) so we replaced it. Now, the dishwasher is leaking from the diverter. There was a o-ring from the original diverter that we had to keep since the new motor did not come with it. Wondering if we should get a new o-ring/seal, but I cannot find mention of such a part anywhere. Is there a certain way to seat the o-ring? Is it ok to


I have experienced the same diverter motor leaking problems. I have the whirlpool gold with the diverter motor (w10155344). I bought the unit new 4 years ago. The fix is remove the the two screws that hold the diverter motor and pull the motor. ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

My asko 1776 dishwasher seems to be missing the ball bearing assembly for the top rack. my home was rented for a couple years and it is possible that it broke and the tenants just threw out the pieces. i did find one ball bearing on the floor of the unit. if I order the replacment parts, can i install this easily by myself?


Hello, welcome to fixyaIt's not too complicated, you'll be fine. Here's what works for me, move the rack stops to the left if you haven't already and then the ra ... Asko Dishwashers

I have a Kenmore Elite dishwasher and the top wash arm doesn't spray. I have cleaned all screens and both wash arms. I feel it is the impeller or is there another thing to check for plugging? I can't seem to find a diagram that shows this.


... Kenmore 15954 Built-in Dishwasher

Kenmore ultrawash 13213k doesn't seem to get water to spray on top rack


... Kenmore Dishwashers

My dishwasher's top rotating sprayer keeps coming loose. The screw and plastic bearing fall out and I think that it has stripped out the end where it seats into the top of the washer. Any ideas on how to anchor this in? Adhesive? A larger screw? The plastic bearing is Part No. 568 and the screw is Part No. 569. If I replace the conduit arm (Part No. 585), will that give it a new, clean spot to screw in too? How difficult is it to replace this arm?


\012Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... Dishwashers

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Sears dishwasher 665.15882000 part #8268296 fell off and I can't find the "screw" that holds it in place...probably went down the drain. Now dishes do not "dry" on air dry. The part that matches the number for replacement parts does not look at all like the one that fell off. The one I have is round and the replacement one showing looks like some funky ninja weapon. Will this work on my machine? How easy is it to replace this part?


... Dishwashers

Spray arm, 3rd level, fell off. Flower-like looking ring is still attached to top of dishwasher and arm itself is no longer attached. How can I reattach the spray arm to the flower-looking like ring?I have Frigidaire model number PLD4555FRC0; part # of spray arm, 3rd level, grey is 154478202. I called help line and got someone whose accent I could not understand. I think his name was Victor. He left the line and never came back but, before he left, he said he was looking for the part...why he, t


Unscrew the flower looking piece, there is a white plastic retaining clip inside- press it back together. ... Frigidaire PLD4555RFC Dishwasher

Dishwasher wasn't cleaning, tried cleaning the top spray arm but broke the hook that holds the top spray, looks like a 1/2inch gray plastic nut/bolt with a split prongs at the top. One prong broke so arm will not stay on. Where do i find this nut/bolt/hook. The LG customer service was of zero help.


Hi,\012That is not that hard to fix and you can easily buy the parts yourselfonline...Here is a tip that will help you with the online buying...How to Buy ... LG LDF6810 Built-in Dishwasher

I have a frigidaire dishwasher 4000 series aqua surge with speed clean. The small spray arm on the ceiling of the washer came off. I found it sitting on top of some cups in the top basket. There is a loose part inside the retainer in the ceiling that moves back into the retainer when I try to put the spray arm back on. How do I fix this and how do I get the top basket out to work on it?


The top arm snaps into place. Simply unscrew the retaining clip from the ceiling of the washer. Inside of there, you will find a small white plastic clip. Make sure the two prongs are pointed down and poking out through the hole in the bottom of the ... Frigidaire PLD4555RFC Dishwasher

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

The top and bottom spray arms were not rotating. We assumed there was a fault with the pump. We replaced the pump. The bottom arm now spins and sprays water but the top arm will spray water but does not spin.


Hi\015\012\015\012Please check if something is blocked near the top spray arm, also make sure that all holes are oopen. Use a sharp metal pin to clean the holes on the top spray arm. Make sure the water pressure is not low. \015\012 ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1164 seconds