Having problems with your Kenmore 24 in. 17032 Built-in Dishwasher ?

I have a kenmore dishwasher doesn't dry dishes

\015 I have a kenmore dishwasher.Mod 665 17032403 ser. 1513991 dont dry dishes, but wash water is heated.\015

Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 17032 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a GE Profile Dishwasher, Model# PDW7880J03SS that doesnt dry the dishes. I pulled out the dishwasher and checked the heating element for continuity with my ohm meter and got a closed circuit reading. I tested the voltage going to the heating element and got a 124V reading. However the dishes are still soaking wet after the drying cycle. What am i missing, what else could be wrong with the machine that the dishes won't dry at all?


Hi\015\012\015\012Check if the dishwasher is draining and filling properly is water temperature. Water temperature should be between 120 and 140 F. If water is not hot enough then heating element has gone bad, to check the element you'll ... Dishwashers

I have a Kenmore Elite dishwasher (model 665.1315), and the dishwasher will run through the wash cycle as expected, but when it gets to the heated dry cycle , it doesn't appear to dry. It will then flash a fault code 81 (8 short flashes of the 'clean' light, pause, and then 1 more short flash of the 'clean' light, longer pause, and repeat the code). The dishes seem to be somewhat dry, but there is certainly water on the dishes and on the tub (there is never any water standing in the tub, and t


Hi,Check your heating element.. \012A bad heating element causes many problems in dishwashers...Dishwasher Problems The ... Kenmore 24 in. 15932 Built-in Dishwasher

Fridgider dishwasher doesnt dry dishes


... Frigidaire FGHD2433KF Builtin Dishwasher

Kenmore Limited Edition Ultra Wash Dishwasher. Model 665 15892100, Ser. FL4910642 E71195, Stock #15892. Loaded dishwasher, started it, and went to store. When we came back, it appeared cycle had not completed (greasy and wet dishes) and the dry cycle had definitely not run. Bottom of dishwasher is filled with water. Tried to cancel/start the machine but control is completely blank and does not respond.


Hello,Welcome to FixYa.The issue with your dishwasher is more than likely the "thermal fuse" inside the control panel...it is all too common with those machines unfortunately.I've at ... Dishwashers

Kenmore Dishwasher model 665.16369300 won't dry dishes


Can you tell me please if all the dishes aren't drying or just the ones on the top rack. i am assuming you have selected the dry at the control panel, if so, you may have a burned out heater element in the bottom of the dishwasher or a non functionin ... Kenmore 18 in. 14432 / 14439 Built-in Dishwasher

I have a kenmore dishwasher doesn't dry dishes


... Kenmore 24 in. 17032 Built-in Dishwasher

Frigidaire dishwasher model fghd2433kf1 doesnt dry dishes


... Dishwashers

Sir, I have a Kenmore Dishwasher, model 363.14455690. The dishes when dry still come out slightly wet; most everything still has to be wiped dry. Can I increase the heat some how??


It is a comination of fully fully rinse agent compartment and hot water. the rinse agent helps with the drying and the steam from the hot water is the finisher . check that first .i this helps you then help me by sending me a 4 thumbs up post. thank ... Kenmore Dishwashers

Kenmore dishwasher My dishwasher is no longer drying the dishes. They come out soaking wet. What do you suggest?


... Dishwashers

Dishwasher doesnt pump, wash dishes. - Kenmore 24 in. 17032 Built-in Dishwasher


... Kenmore 24 in. 17032 Built-in Dishwasher

Kenmore 74362 My model# is 665.74362400 this unit is only just over one year old. My problem is it shut down and the quick rinse light started blinking. I have tried some of the button-reset procedures that were on some other responses but to no avell I even left it unplugged for a while. Any impute would be appreciated. I have a Kenmore Dishwasher Model #74362. After we run a cycle for a normal wash and heated dry the dishes are all very dirty and greasy. It is as if they were never washed. Th


I had the same issue and you will never beleive the solution.\015\012Steps to follow:\015\0121) run one full cycle with no dishes or soap\015\0122) run one full cycle with a dishwasher cleaner like Jetdry\015\0123) run one ful ... Dishwashers

I have a Kenmore dishwasher Model # 665.1376 which has always been a quiet unit. This dishwasher is about 4 years old. Now the dishes still come clean, however the cycles have a loud hum to each except for the dry cycle. Could this be a bearing in the motor, and if so how expensive is a new motor?


... Kenmore 13763 Stainless Steel Dishwasher

My wife has a kenmore quietgaurd standard dishwasher, model number 587.16149400. Our issue is that its getting so hot during its drying cycle that is melting plastic dishes. I checked and everything is dishwasher safe so it shouldnt be melting. It is even melting really thick items like water bottle lids and brand new plastic cups. it is also not rinsing well. What could be causing this?


... Dishwashers

KENMORE MODEL # 363.16222100 Hello - my dishwasher (model# above) is currently filled with H20 and will not drain/work. When the knob to select the dishwasher cycle to begin is turned, it just 'clicks' and does not engage the washing cycle. When I tried to just let it run the cycle as is to 'restart', it had an electrical odor to it., Currently the knob is at the 'Rinse & Hold-(Heated Dry Off)' part of the cycle and all dishes have been removed. I would appreciate any assistance available. Thank


Either the motor is locked up or the control failed. You will need a service visit. If it is over 10 years old, I would buy new. ... Dishwashers

I have the new kenmore elite, stainless steal front....and have had it for about a year...and have noticed that the dishes are foggy even after dry and as if still dirty. The soap is streaked all inside the washer as well. I have been using Cascade Complete and jet dry.....is this the best dishwasher soap to use? HELP Karen, from California


Have you ever used a product called affresh it is sold at your local home depot and comes in two types one is for front load washers and the other is for dishwashers and let me tell you this product works great it actually cleans the inside of your d ... Dishwashers

Cloudy dishes 1 Solution for ''the dishes in my kenmore dishwasher come out cloudy even with jet dry and vinegar rinse''


Hi there.You will need to get some cleaning detergent so you can clean the jets and the internals of the machine, once the clean has been done you should end up with clean dishes.Good luck and thanks for using FixYa!! ... Kenmore Dishwashers

My Kenmore model 665.16022401 has the problem w/ the clean light flashing. I tried the bottom combo of hi temp wash, heated dry, high temp wash, heated dry and it re-set my dishwasher but then after I tried to run a new load it doesn't seem like it finishes all the way through because there is still soap left in the soap dispenser and the dishes arn't all clean, plus the green clean light begins flashing again. Don't know what to do.


... Kenmore 24 in. 16022 Built-in Dishwasher

Kenmore model 13484 cannot dry the dish load - Kenmore Dishwashers


Hi,Check your heating element.. A bad heating element causes many problems in dishwashers...Dishwasher Problems The Heating Element not Worki ... Kenmore Dishwashers

My dishwasher will cycle to the end and it doesnt seem to drain, consequently the coil is under water and it doesnt dry the dishes


Hello , the first thing to check is if it drains at all. Find the drain outlet maybe under the sink , disconnect it and set it in a bucket to catch the water if it drains , then start the unit on a cycle and press cancel , this should start the drain ... GE Nautilus 24" Built-in Dishwasher

My Kenmore dishwasher model #66515639000 quit working. It was washing dishes just fine one day and then the next the buttons weren't working properly. The pots & pans button was flashing with the cancel button. After searching on your site, I tried to resent the control panel by pressing the normal wash button and the air dry button 3 times then opening and closing the dishwasher. Now the quick rinse button is flashing. Any ideas of what to do now?


... Dishwashers

I have a kenmore ultra quiet dishwasher. I am having trouble getting the top rack of dishes clean and the heated dry doesn't work it heats up but doesn't dry them


Hi,\012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried in vainto clean the things... \012Bought new spray arms online and installed them inminutes...now the thing works ... Kenmore 24 in. 15689 Built-in Dishwasher

Hello, We need some assistance with our Kenmore dishwasher. Last night after I started a load, the dishwasher just stopped and then the washing and drying lights started flashing red, sanitized and green are flashing green and the 6 hour delay button is flashing red. I have pushed the start/cancel button but to no avail. My husband shut the power from it to see if it would reboot, it does not help either. It runs a little bit then quits and does not clean the dishes. Could you give us sugg


Hold the start button for 3-4 seconds and see what that does ... Dishwashers

Esl 6115 dishwasher not using hot water and doesnt dry dishes!


... Electrolux 23 in. ESL624 Built-in Dishwasher

Dishwasher fills tub continuously until float turns it off whether in cyle, during drying or after cyle complete. That means during drying when the dishwasher is trying to dry the dishes the tub fills up preventing drying. This is a new dishwasher that I've never used. I allways noticed the tub was full of water, but thought that was just to keep the seals moist so they don't rot. I've been in my house 5 years and only hand washed my dishes because it was more convienient. Now that there ar


Ayacht, the fill is a timed fill controlled by the control board (part number 99003158). The float is a safety device designed to cut power to the valve in the event of a failure. The fact that the float is doing it's job and stopping the fill tend ... Jenn-Air 24 in. JDB1080AWS Built-in Dishwasher

I have a Kenmore 17659 Ultra Wash III and when I run it, the water doesnt appear to be getting into the dishwasher. It turns on and goes thru the cycle but the dishes dont get cleaned.


Hi,\012Here is a tip that will help you to find out why water will not come into the dishwasher... Dishwasher Tr ... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1432 seconds