Having problems with your Kenmore 24 in. 17039 Built-in Dishwasher ?

Would like to purchase stainless facing? - Kenmore 24 in. 17039 Built-in Dishwasher


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 17039 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Would like to purchase stainless facing? - Kenmore 24 in. 17039 Built-in Dishwasher


... Kenmore 24 in. 17039 Built-in Dishwasher

My dishwasher so my dishwasher seemed to have quitworking during a cycle. like breaker triped or something. i checked the breaker and thats fine. it seams like its hard wired in though. Would that be right? and is there a fuse or something that could/would blow during a wash? I dont know what model it is or anything it was in the house when i got it. The dishwasher is built in and it seems decently old its a kenmore ultra wash and it has like 10 buttons for the differend cycles on the left and a


Sounds like the fuse on the control blew. you can replace the fuse for\015\012around $20 or you can cut and splice the wires for free. If that doesnt\015\012work then you may have a loose conection in your junction box under the\015\012dishwasher. ... Kenmore 24 in. 15932 Built-in Dishwasher

How do I remove the top rack from our Kenmore built-in dishwasher? It looks like it has a plastic clip at the end of each rail that if not there would allow the rack to simply roll out. How do I take those clips out without breaking them and still be able to re-insert them?


Believe it or not you should be able to just push the clip ion the midle it will unsnap, when it it will basically unlock and allow you to slide it off, simply reverse the stepes to put it back on ... Dishwashers

I HAVE A MODEL # RUD1000DB2 BUILT IN DISHWASHER AND IT IS NOT CLEANING PROPERLY ALSO I WOULD LIKE TO KNOW WHERE WE CAN PURCHASE ANOTHER ONE OF THESE IF NEEDED IN TORONTO ONTARIO THANKS SHERRY


Hi, \012I have an older dishwasher also and recently mywife also complained about it not cleaning right... so me being the man I amtried in vain to clean the things... Bought new spray arms online and installedthem in minutes...now the thing works li ... Roper 24 in. RUD1000DB Built-in Dishwasher

I would like to reset my bosch she47co5uc/21 - Bosch 24 in. SHE47C05UC Stainless Steel Built-in Dishwasher


... Bosch 24 in. SHE47C05UC Stainless Steel Built-in Dishwasher

I'm looking for the manual for our built-in Whirlpool dishwasher model DU1000CGT2 purchased in 2001. I am unable to locate the manual on your site and would like to have the manual on hand. Can you help with that?


Owners Manual - http://shared.whirlpoolcorp.com/assets/pdfs/literature/Use%20and%20Care%20Guide%20-%208051566.pdfInstallation Instructions - http://shared.whirlpoolcorp.com/assets/pdfs/literature/Installation%20Instructions%20-%208051229. ... Dishwashers

I have a Sears Kenmore Elite dishwasher Mod. # 665 - Ser.# FJ4805735 that intermittantly skips the wash cycle and pumps the hot water out just after filling. This unit was built in 2000 but the entire drive unit was replaced about 6 yrs. ago. If the problem lies in the electronics is it worth a do it yourself repair. I have an antique (1970'S) appliance repair background and electronics is not my forte. Money is tight and I would like to squeeeeeeeze another couple of years out of this appli


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Would you be able to supply the complete model number. The Kenmore elite dishwashers where made by many different manufacturer's over the years, even within t ... Dishwashers

Hello, I purchased a Kitchen Aid Architect II series KUDSO3FTPA3 ~ two years ago. It is deigned so you can put your own panel on it. Duw to a design issue with my cabinets I was not able to add my own panel and wanted to purchase the stainless panel to cover the front of the dishwasher. Kitchen aid was no help, they sold me a panel that would not fit and then would not take it back! Then they said I would need to replace the entire door for $389.00! I need to know if there is a stainless


There is a MUCH better way! go to www.applianceart.com, these guys have tons of panel options including stainless and fax stainless that was featured on HGTV and the Today Show. www.applianceart.com (Appliance Art) ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a Kenmore 665.1373 Ultra Wash dishwasher that will not work. In the past few weeks, it stopped mid-cycle, the the clean light began to flash. Sears sent out a technician who told us that the latch was not catching. He adjusted it, did something with a computer and the dishwasher worked for a couple of days. This time, it would not start a cycle, it would only show heated dry if you pushed the smart wash button and nothing if you press start. It looks like some of the lights are continuous


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

I would like to purchase a Bosch dishwasher and would like to know which model compares to the old Bosch model no. SHV66A03?


... Bosch 24 in. SHV66A03 Built-in Dishwasher

I would like to purchase a Moyer Diebel U/C dishwasher for residential use. I have the option of purchasing a used dishwasher - it could be one of three models. Which one is the model he is trying to sell to me? 1. 501 HT 2. 501 HTN 3. 501 LT the owner states the voltage is 120/208-240 and heats between 150 f and 180f.He notes there is a 4 ft. cord at the back without a plug on the end of it but the model is rubbed off of the serial number tag.There are three switches on the lower right hand co


The way you mentioned the unit have a 4 ft. cord at the back seem like a 50l LT the best way to determent is open up the bottom plate and see whether there is a booster tank in the right hand side. \015\012Hope this can help you. ... Moyer Diebel 24 in. 501HT Built-in Dishwasher

I have a hotpoint built in automatic dishwasher model HDA3740G02SA. When my dishwasher runs all the cups on the top shelf seem to have dishwashing soap powder left in the bottom of the cups. I do not over fill the cup where you put the dish washer powder in. It seems like it isn't rinsing the glasses and cups on the top rack of the dishwasher properly. Do you know what the problem would be and how to correct it?


Make sure the arm on top isnt hitting something, each time you load it each in there and spin it to be sure it moves freely, also make sure your rinse agent container is full of rinse agent. ... Hotpoint 24 in. HDA3740G Built-in Dishwasher

Would like to change the white dishwasher door to stainless.


Sure is. As long as the door is same size and same button options and you can get it to latch on, then no problem. I have seen others do it. You can always check out repairclinic.com to see if they have the door. ... Maytag MDB7100AWB Dishwasher

Stainless panel for Kenmore 3631532 dishwasher?


I have two options for you to consider. One is to take your panel to any sheet metal fabricating shop and have them make a stainless steel version for you. The other is to get a spray can of stainless steel appliance paint and apply it. i have use ... Dishwashers

Why would my dishwasher not fill? - Electrolux Kenmore 24 in. Built-In Dishwasher with 5-level Precision Direct Water Delivery System Dishwasher


Check the following:\015\012\015\012Make sure the water is turned on to the dishwasher\015\012\015\012When you press the start switch, you should hear a "click" which is the water valve opening - if no click, you should check ... Electrolux Kenmore 24 in. Built-In Dishwasher with 5-level Precision Direct Water Delivery System Dishwasher

Bosch dishwasher Model SHU43C02UC/17 consistently leaves film on glassware, leaves residue in the bottom of glasses in the back position of the top rack, and sometimes leaves gritty residue on dishes throughout the dishwasher. The stainless steel interior is also stained. I regularly clean the filter, use Jet Dry (the product that was included with the machine when I purchased it), and rinse the dishes before filling. The dishwasher has never cleaned dishes like the 17-year-old Kitchen


Although I previously posted with the same problem of a film on the dishes after cleaning, I did find a section in the owner's manual which solved my problem. Lift up the rinse aid cap on the inside door - the factory setting is on "4". The rinse a ... Bosch 24 in. SHU43 Built-in Dishwasher

Our LG 6810 dishwasher has stopped cleaning. After the cycle the dishes are wet and covered in greasy clumps. We ran the test cycle and got the following: 3H/U3 11 22 33 44 55 66 04-2 32 33 0 (inlet valve) 35 36 37 38 23 (Thermistor) 3A 3A (beeped twice and showed 3A) 3A (beeped twice and showed 3A) Any advice you could give me would be appreciated. I have the service manual but have never done any type of dishwasher repair. I'd like to not have to replace this dis


1.) Take racks out of unit.2.) put both of the spray arms in the 12 o'clock position3.) Run the washer,once the washer has started wash cycle,open the door and ensure the spray arms have moved off of the 12 o'clock position. Write down re ... LG LDF6810 Built-in Dishwasher

I have a Siemens Dishwasher. I'm not sure of the model but it is built in, has concealed controls and was purchased about 6 years ago at Best Buy. It sort of looks like the SL85. When started, it runs for a few minutes and then starts to make a horrible sound. ALmost a grinding sound but may also be like water trying to get through a small opening. The sound does not stop even after turning off the DW and even the power to it. Only turning off the water supply does it stop. Help?


... Siemens SL85A705UC 24 in. Built-in Dishwasher

I have a Kenmore Quietguard portable dishwasher which does its job excellently. My problem is that I can't seem to find a proper spigot attachment in a standard hardware store, like Rona, that hooks up to it satisfactorily, or at all. On the faucet I had before I had to wrap the joint tightly with a big dishcloth or it would squirt all over the place. I have a new faucet now, and so far the dishwasher's faucet attachment won't even stay on when the water's running. I'm wonder where I can get th


... Kenmore 17259 Free-standing Dishwasher

Bosch Dishwasher I have a stainless steel Bosch dishwasher, I made the "mistake" to try to see if I could fix the jammed handle from the door. Unfortunately, (did not realize the top panel comes off without opening the entire door). I removed the screws from the door frame (Inside panel), and the door springs/latched got loose. I would like to put it back together, but I dont have any diagrams on the door to make sure all parts are in place to put the door back together. I have been havin


Hi ED,\015\012\015\012It sounds like a real problem here. If the springs are still in one piece, my best guess is to to remove the springs from the door. Then attach the springs to the dishwasher body first, then reattach the spring to the door. Not ... Bosch 24 in. SGS43C12 Classixx Free-Standing Dishwasher

Hobart Dishwasher We have an old smaller built-in dishwasher at our church (Hobart model WM5H). It doesn't stop spraying water if you open the door to remove a rack of dishes to put the next rack in like it is supposed to. One member thought it may be the Electrical Timer Switch? Would this be a fairly easy repair?


I guess I didn't understand your statement of the problem. If you know that the washer has gone through an entire cycle, and it is time to take out the RINSED dishes, yet the washer turns on when you do this, play with the door interlock and the doo ... Hobart Dishwashers

I have a not quite 2 year old Kenmore dishwasher model #665.1322.(I believe built by Whirlpool) The motor has burnt out. That seems ridiculous to me when there is just my husband & I using it and I've had dishwashers in the past that have lasted 10 - 15 years. Anyways - we have no warranty so we thought we would try to replace th motor - but I can't find anything online. We live in south western Ontario - any suggestions of where we could find a replacement motor?


I have recently had the same problem with the same model. Do you think there's a connection? I'm going to report this to Consumer Reports. ... Kenmore Dishwashers

Just purchased a kenmore dishwasher model 665 13152K701, Serial # FU 5002219. There is water in the bottom of the dishwasher at the end of athe cycle. What would cause this and how do I correct it?


... Kenmore 24 in. 15689 Built-in Dishwasher

Dishwasher I need to know the dimensions of a Siemans Dishwasher that I would like to buy sight unseen. The model number is SE657390G, and although it is built in at the moment, the owner said that it can also sit independantly. I need to know the dimensions to see if it will fit in our kitchen.


(H x W x D). ? 810-870 x 598 x 570 mm. ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Kenmore Dishwasher model 665.1675592 doesn't seem to wash as well as it used to. Seems to have a low water level. Filler valve works, allows water in, but never seems to fill enough. No spray reaches top shelf, I think due to insufficient water level. It's like the timer doesn't stay on long enough for it to fill. Also cycle time seems WAY up, but if the timer is slow, how does it time out filling so fast? Looks like it would be slow all the time. Suggestions?


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2475 seconds