Having problems with your Kenmore 24 in. 17262 Built-in Dishwasher ?

Dishwasher stopped. No lights go on. As though no electrictity were being supplied. Circuit breaker has not been tripped.


Answers :

Start by checking the connections where the power connects to the machine. If it has an electronic control there is a fuse that does open. Eric
Repair Help & Product Troubleshooting for Kenmore 24 in. 17262 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Frigidaire model GLD2155RDC1, installed in 2007, stopped working after we lost power. When we flipped the circut breaker back on the lights for Air Dry and High Temp Wash started blinking, but none of the other buttons work and when we open the door these lights stop flashing and there is no power for our machine. We tried tripping the breaker a few more times and it kept doing the same thing.


... Frigidaire Dishwashers

My ge 7880 dishwasher keeps tripping the circuit breaker. display lights up with no problem but when trying to run the machine it just trips the breaker and cuts off power. is there an issue with the control panel or something else?


... Dishwashers

Hi In the middle of a wash cycle, my dishwasher tripped the circuit breaker on the wall. I diagnosed this by unpluggin dishwasher, plugging in a different appliance and switching circuit breaker back on. new appliance worked OK. When dishwasher had cooled, I tried it again on same circuit (which I knew was working properly). The lights came on for about three seconds, and then the circuit breaker cut back in again, so I knew it was the dishwasher that was causing the problem. Is there anyt


Ck the connections where the cord hooks to the wiring harness. look for hot or shorted wiring . also ck the contro panel for the same . generaly if you have a power draw like you are saying then you can see t ... Dishwashers

Whirlpool gu2400xtpt3 Green light flashes, doesn't run, how can I repair this myself? "Normal" light keeps blinking; tripping breaker didn't work; all the "sequencing" suggestions (hi temp, heated dry, etc) didn't work. I'm at my wits end. Any ideas? I have a Whirlpool GU258xtpq3


... Whirlpool GU2400XTP Built-in Dishwasher

The dishwasher stop during the wash cycle. It did finish draining the water from the tub. The machine is not showing a power signs, I check the circuit breaker and the fuse is not tripped. I open and closed the door and the door latch seems to be working fine. There is just no power to the washer. Usually when a machine breaks down, there still is power or buttons that light up on the front of the machine. I looked on the internet and many say that the fuse could be tripped. No where can I find


... Whirlpool DU912 Dishwasher

Maytag quiet series 200 wont start, no lights on control panel,power is on, breaker tripped, flipped breaker back, other appliance on circuit works


... Dishwashers

My Kenmore Dishwasher won't turn on. Was working fine last week, but when I went to start it yesterday, nothing starts or lights up when I push the button. The options buttons still light up, but thats it, the wash cycles and the start and stop buttons...nothing happens. I tried tripping the breaker to reset and it did no good.


Hi,\015\012\015\012A device may cease to function or operate sporadically if the electrical cord is damaged. Inspect the cord for any damage. Check whether there are any black smudges or burn marks on the outlet, cord or anywhere the cord comes ... Kenmore 15129 Built-in Dishwasher

I have a GE Quiet Power 3 dishwasher that was working fine last week. Over the weekend I ran it and we could hear a banging noise, so my boyfriend opened it three or four times in a row (during the cycle) to figure out what it was. The fourth time, it went dead. I checked and it had tripped the breaker. I reset the breaker and the dishwasher seemed to be working again, however the lights on the front were flashing (they hadn't previously), and now it will run for about 10 minutes but no water ru


Were you able to figure this out? We have the same problem here! ... Maytag Dishwasher

Ge dishwasher model gld5560l00ss --when you hit start nothing happens - if you hit start again , light on any selected switch begins to blink. have tried rebooting control that was suggested in owners manual by tripping breaker and then resetting after 30 seconds, ( this did not change anything). machine makes no noise but lights do come on.


... GE Dishwashers

Frigidaire fghd2433kb1 No front panel lights. no control panel lights. Checked circuit breaker. not tripped.


... Frigidaire FDB956RB Built-in Dishwasher

Nothing lights up. seems like no electricity. checked breaker in breaker box, not tripped.


Hi.If possible use an extension to test the appliance on a different main socket , or test the socket using a different device. In any case check power cord connection.If main is OK replace the ... KitchenAid 24 in. KUDK02CRBS Stainless Steel Built-in Dishwasher

MDBH945AWW maytag dishwasher panel lights will not light up. checked breaker and was not tripped. Hardwired circuit. will check tomorrow to be sure power gets to dishwasher. Suspect have panel control failure. In which case should I box it up for the local dump.


These control boards do not have fuses on them. I opened mine up when the front panel touch pad stopped working and the LED indicators were anemic. This is a sign of the ribbon cable connections have oxidized. The ribbon cable connects the touch p ... Maytag MDBH945AWW / MDBH945AWQ / MDBH945AWB Built-in Dishwasher

Kemore dishwasher 665.17029403 is hooked up, breaker not tripped but no power at all - lights will not come on. Power initially would be intermitent - lights on, then off, but now there is none. Is the unit worth repairing or a new machine a better option cost wise?


I would check the power conction under the dishwasher. Make sure the power cord is disconected or the breaker that supplys power to the unit is off. remove the kick plate at the bottom of the machine and locate the power concetion box and inspect th ... Dishwashers

Control panel will not light up, the dishwasher was running and now it has stopped mid cycle and will not do anything. I just replaced the control panel (black plastic with buttons, not control circuitry). was running the diswasher and it seemed to be working fine, then stopped. water is standing in tub, I checked the float, I don't think the float is the problem. There is power to the outlet, no tripped breakers. But control panel will not light up.


I have a kitchenaid dishwasher model # KUDC10FXBL1 I went to start it and none of the buttons were working. I have checked the breaker and the wiring and everything seems to be in order. ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

GE GHDA475M00CS stopped running the cycle, did not notice the "clean light was not on and now has no lights on the front, there are no tripped circuit breakers


... Dishwashers

My dish washer just stopped working, no power no lights no nothing. it is plugged in and the circuit breaker is not tripped the wires for to the plug are tight and i didnt find an loose wires, the gfc plug is not tripped either, any suggestions?


This machine has no power, and i would suspect a broken wire but you say the trip did not trip,have you got a voltage tester?if so set to x1k or until when you touch both points it workes.with the plug in hand put one point on the right plug ter and ... GE 24 in. GSD3630Z Built-in Dishwasher

Dishwasher did not finish rinse cycle and is now unresponsive. I reset the circuit breaker (that wasn't tripped) but still no lights on the washer.


... Kenmore 24 in. 15932 Built-in Dishwasher

My dishwasher hasn't been working for a while... It's plugged in and the breaker isn't tripped but it wont work the lights on the front aren't even working


Fire her ****!! and send her packing and find a new one LOL there is however a reset button under the front you can try to see if that helps ... Dishwashers

No lights no sounds no nothing like it is unplugged but it is hard wired in and the the breaker is not tripped


... Haier ESD310 24 in. Dishwasher

Indicator lights do not come on, fuse not blown / circuit breaker not tripped.


... Bosch SHX46A07UC Built-in Dishwasher

Got a Frigidaire model FDB750RCS0. Now it was running for a couple of min then I hear a clicking sound. Thought it might be something hitting the propeller. I opened the door and nothing. Closed it and now it wont even work. Thought the breaker got tripped but not even that. Now when I had it set back to the cancel part, the Clean Light comes on very dim where as before it use to be bright. Any solutions?


... Frigidaire 24 in. FDB750RC Slim-Line Built-In Dishwasher

Power loss during use. No lights on console. Other appliances on line ok. Circuit breaker not tripped. Model W10073320


Your dishwasher is possible to have an imperfect wire conection on the cord or inside. unplug the washer and check the wires or much beter: call a repairman for your saftey! ... Dishwashers

I have a KUDS25 dishwasher and the child lock is flashing. I have held down the "Energy Saver" button for the 4+ seconds and it still flashes. I have tripped the breaker for minutes, only to have it restart flashing. It ran perfectly until this issue yesterday. HELP!! It will not operate with this light flashing.


... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Frigidare dishwasher is flashing PF but breaker isn't tripped. What is wrong? Specific info is "Gallery Dishwasher 900 Series" Model # FDB949GFS2 The 2 green lights over the "Hi Temp Wash" and "No Heat Dry" are also flashing


Ok,\015\012\015\012I realize your breakers may not have been tripped, But I am going to tell you what the code is and what it means. PF "power failure" this happens when you had a loss of power ether long term or ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

The cycle started then stopped after 10 min. There is water in the bottom and no lights will come on. There was no breaker tripped.


Circulation pump needs replacing call 1-888-nyc-1055 this company repairs all bosch seimens thermador and Gaggenau units. ... Bosch 24 in. SHU5305UC Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0965 seconds