Having problems with your Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher ?

There is a metal piece that grinds the food in the bottom of the tub. the teeth that turn it seemed to be stripped and we can't find the name or number of the part to replace it


Answers :

Repair Help & Product Troubleshooting for Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

There is a metal piece that grinds the food in the bottom of the tub. the teeth that turn it seemed to be stripped and we can't find the name or number of the part to replace it


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

LG - LDF7811ST Dishwasher will not turn on at all. I have replaced the main PCB board and checked all wires for shorts. The PCB board does have 120Vac to the board. I have also checked the latch and it does close the switch when the dishwasher is closed. I think it may be the main switch/power button board but can't seem to find the part number or alternate part numbers that can be used.


Hi. The likely culprit will be the power switch. The part number for this switch is 5020ED3011A.NOTE_ Make sure there's power getting to the dishwasher. Check for a tripped circuit breaker or a blown fuse. Check the wall socket for po ... Dishwashers

Sears dishwasher 665.15882000 part #8268296 fell off and I can't find the "screw" that holds it in place...probably went down the drain. Now dishes do not "dry" on air dry. The part that matches the number for replacement parts does not look at all like the one that fell off. The one I have is round and the replacement one showing looks like some funky ninja weapon. Will this work on my machine? How easy is it to replace this part?


... Dishwashers

Grinding The situation: I have had my Whirlpool DU915PWPB1 for 2 1/2 years, it isn't the greatest dishwasher but does the job good enough. Recently, the water will fill, the washing cycle will run but then when that part stops it goes into a whirring that seems like a motor is going but nothing is moving. I have removed the Filter Modual in an attempt to find out what the grinding would be. There doesn't seem to have anything in the way or under the filter. I have ascertained that the grin


Noise probably not from there when reassembled the plate will not be direct contact with screen noise is probably from wash motor itself..suggest checking owners manual for warranty info ... Dishwashers

Hi, I am looking to find replacement parts for the top rack glider wheel and screw on the right side of my dishwasher. Model # mdbh970awq. I have found parts break down web sites but none seem to have the part I need. Thanks for the help.


... Maytag 24 in. MDBH970AW Built-in Dishwasher

My Whiripool gold (Model Number)gu1200xtkso Does not drain - Everything else works fine but when the cycle is over the water is still Present. I dont know how to unscrew anything. I cant seem to find what to take off.. seems in possible to even check help....


... Dishwashers

I have a KITCHEN AID DISHWASHER Model Number: KUDV24SEBL2 and need to replace the Shield, Sound Tub Part No. 3378573. No one has it in stock. Any suggestions on where to find one or build my own replacement?


Hi,You could buy it from :-http://www.appliancepartsworldwide.com/Store_SearchResults.aspx?S=385148&ST=PBMIt is in stock as per them.Let me know,if needed further assistance.Hope i helped yo ... KitchenAid 34 in. KUDV24SE Built-in Dishwasher

How do i put the lower spray arm back together? I had to replace the top screw part and it seems to stand up to high. I have a small white plastic ring, a larger white split ring and the arm itself. I have tried every configuration to put this back together but it is not right - the new "screw" part number is the same as the original.


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I found part number 8557720 laying in my Kenmore dishwasher. I'm trying to figure out where it goes. Can't seem to find a site that shows where this part is supposed to be. Any suggestions?


I think this is the top sprayer on your dishwasher. Mine also pulled apart by itself on each dishwashing. I am purchasing the spare part in hoping that it will not do this again.http://www.searspartsdirect.com/partsdirect/part-number/Wh ... Kenmore 24 in. 17032 Built-in Dishwasher

I have a Maytag DWU8250BAX and the thing leaks like crazy. I just replaced the door gasket, but that is not the problem. When I took a closer look at the door it seems as though the water is getting up and into the door through a space in the bottom of the door. It seems to me like there should be another door seal to fill a gap that sits between the door hinges. If anyone knows if there should be a seal here and then what the part number might be that would be great. Thanks!


There is an airgap under the door..it should spray up and run down the door not spray up under it..look for crack or hole in spray arm..if there is the wrong soap in it it will flood out with lots of bubbles..just have to flush it out. lastly, if you ... Dishwashers

I need a replacement part for the upper right rack wheel that rolls inside the metal track.....NOT the wheel that the metal strip slid along. Could you help me find the part?


... Maytag MDBH965AWS Stainless Steel Built-in Dishwasher

I have a 6 year old kitchenaid, model KUDS01FLSS2, and the door seems to have a broken spring, the (very heavy) door just falls when I open it. I don't seem to be able to find a part number


Your part number comes up as a microwave however this site has the parts yo need all you have to do is call and they ship, you will most likely have to buy a latch assembly kit but you can ask the operator and if they don't have it they can tell you ... KitchenAid Dishwashers

I have an LG dishwasher. Model LDF7811BB. It is giving me a TE error code. I had previously used ya'll for help and ya'll emailed a tech sheet saying to replace the thermister. I called to order the part and the supplier said they can't find a thermister on this unit. Can you tell me what part number it is? Thanks, Greg.


Hi \015\012 \015\012Either the inlet water temp too high over 140 degrees or your thermister went open, or you have a bad control board. This type of error code will require using an ohmmeter to chec ... Dishwashers

I've a Kenmore - Whirlpool dishwasher purchased in 7/2002(665.17574200), which seems clogged. T The ''Accumulator Assembly'' (8268429) filter is clean, and I've stripped the unit down to the plastic components. This has happened once before, and the repair person cleaned some kind of secondary filter, but I can't locate that filter on the parts diagram. I'm guessing it's below the ''Protector inlet'' (8268390). Either I buy a new dishwasher, which seems a waste, or I find out how to clear the


... Kenmore 24 in. 17572 Built-in Dishwasher

Need new detergent cup dispenser for Model KUDI220T4. The detergent cup dispenser (Part number AP3042989) has been discontinued. Need to find the replacement part and directions on how to remove existing detergent cup dispenser and install new detergent cup dispenser.


... Kitchen and Much More Dishwashers

I HAVE A MAYTAG MODEL MDBTT59AWQ DISHWASHER THAT WILL NOT START UP. LIGHT ON CONTROL PANAL FOR HEAVY AND LIGHT LOAD LIGHTS, DELAY ONE DOESNT AND THE START/CANCEL ONE DOESN'T LIGHT EITHER. WORKED FINE A COUPLE DAYS AGO. TRYING TO FIND A MANUAL OR PARTS BREAK DOWN BUT CANT SEEM TO FIND ONE FOR THAT MODEL.


... Maytag Dishwasher

I need the upper and lower rack rollers replaced but do not know the part numbers. I am looking for a parts diagram on the internet but have been unable to find one. GE Nautilus, Model GSD2200G00CC


This link, provided by www.repairclinic.com shows what you need.\015\012\015\012 ... GE Nautilus 24" Built-in Dishwasher

One support leg missing, cant find a replacement online...tried several spare parts sites. Its basically a large black plastic screw for a tecnik TKD 795 integrated dishwasher.


Get a peice of 1inch board and put under it to stablize it...it mat take more... ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Bosch model SHU9915UC dish whasher water feed will not turn off. Need to know if control can be repaired or replaced? Part number, where can I order one, can I change it myself, I am handy.


Hello,Welcome to FixYa. ... Bosch SHU9915UC Dishwasher

Good morning, I have 01 Hobart dishwasher AM14, i need to be replace rinse sensor probe and temperature sensor for booster heater.But I can't to find Hobart part number Please help me.Thank you.


294692 for the rinse probe.\015\012"temperature sensor for booster heater"? Do you mean the thermostat? If so, part number is 274161.\015\012\015\012Parts breakdowns and part numbers are available at ... Hobart AM14C-155 Dishwasher

My Delonghi dishwasher stops partway through the cycle - sometimes more than once & upon opening the door I find that the program number LED is flashing. I push start again and the load finishes. What could be causing the error? It seems to complete the load fine as long as I turn it back on.


Please provide the full model number of the dishwasher.\015\012\015\012it is likely either the door seal is hardened or the door latch is not making proper contact with door switch. This could be the reason it stops but when you open and ... Dishwashers

G661 SC My Dishwasher wouldn't take the water, and I had a Technician come by. He opened the right side of the dishwasher and said that I need to replace the  large White Plastic Part that transfers the water from the hose to the inside of the dishwasher. Does anybody know the name of it, or where I can find one for this model?


It's called the water intake. They usually dont give too much trouble. Can you give more info on the symptoms please?\015\012Any lights flashing on the machine? If so which ones?\015\012Is any water at all coming in? or is the machine tot ... Miele 24 in. G656SCi Plus SS Built-in Dishwasher

Is shy66c05uc/14 the same model number as shy66c0fuc ? If so I need a the filter that inserts under the big mesh plate in the bottom of the dishwashwasher- where is the best place to replace such a part? Mine seems to be literally coming apart at the seams!


... Bosch 24 in. SHY66C05 Stainless Steel Built-in Dishwasher

Normal cycle light blinking, won't turn on MDB7609AWW1. Was told it was micro computer. Replaced it....same problem..Put old micro computer back in.. wife secured all wires and banged the machine and it started working tfor a few Days.. stopped with same old symptoms..I'm sure guru is correct and it is the touchpad, but his facing appears to be glued on,I don't wan't to ruin the front of the console , and I've not been able to find a touchpad part on the schematic or online. Help???


... Maytag MDB7609AW Builtin Dishwasher

2000 epw Northstar Item # 157942E 230v 2000 psi 3.5 gal/min #5 nozzle Problem: No pressure. Motor running...seems to be in bypass. Checked starter...but not finding power to the pressure regulator. May need a new starter/relay/contactor. Was working fine..May wish to order a starter and a possibly a pressure regulator...I have photo's of the complete set up if needed. Need to know part numbers to order and what company to order from. Thanks, Greg Scott


... North Star Stainless Steel Under Car Cleaner 16in
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1716 seconds