Having problems with your Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher ?
Kenmore Elite soap door problem
\015 Cycle runs normal but at end door on soap dispenser is still closed and soap tab is intact. Using Electrosol super tabs. Could they be too thick, causing door to jam? They are the ones with the ball of "jet dri" in the middle. Please comment\015\012Thanks, Kevin\015
Dispenser may be bad. Push the hi-temp button , air -dry, hi-temp, air-dry in that order. All lights will lite up and this will do test cycle of all components. If soap disp opens then soap tab may be the issue. I have had intermittent dispenser issues and they are often hard to solve as other components may be at fault.
Repair Help & Product Troubleshooting for Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Tips for a great answer:- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.
Suggested Questions/Answers :
Kenmore Elite soap door problem
Dispenser may be bad. Push the hi-temp button , air -dry, hi-temp, air-dry in that order. All lights will lite up and this will do test cycle of all components. If soap disp opens then soap tab may be the issue. I have had intermittent dispenser issu ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Soap Dispenser Problem with Kenmore Elite Dishwasher
Our dishwasher is not working, for example,\015\012when ever i click on quick rinse it will automaticaly go on pot and pans ... Dishwashers
Kenmore elite dishwasher runs until it is manually shut off by opening the door? My Kenmore Elite runs continuously until I manually drain (cancel) the cycle. Then I have to rewash with no soap to simulate the rinse and again manually drain (cancel) the cycle. This was a $650 dishwasher. I am not sure how to reset the controller or even trouble shoot for an error code. Any suggestions?
It appears your timer/main controller/CCU has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites bec ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Kenmore Elite 665-16959000 dishwasher - soap door
It appears your dispenser wax switch has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites because ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Kenmore Elite 13133K started to fill, the door was opened. Now it won't resume, drain or fill, the geen light is flashing. I turned the power supply off for 5 minutes and the problem still exists.
Soap dispensing problems on a kenmore dishwasher elite 577-0
Is your soap door open when this happens if it is then make sure there's no water or other liquids in the dispenser from loading the washer one tablespoon of water in there will clump up the soap and it won't drop when it pops open ... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher
My Kenmore Elite suddenly stopped filling with water. I pushed start but when I checked it hours later the soap dispenser door had opened, the soap is just lying in a puddle, and nothing is clean but the clean light on the front panel is blinking. I tried again to no avail. Any ideas? I've had the machine since it first came on the market and have had other issues with it--it never drains completely, it makes sounds like someone revving a sports car engine when the drain pump is engaged, my dish
Https://secured.whirlpool.com/Service/SrvTechAdm.nsf/2cd44500d572193285256a4 ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Kenmore Elite Dishwasher 630 1630 9400 Soap Dispenser Problem
From your description even when the soap dispenser opens it is opening late which is why all the soap does not dissolve.\015\012\015\012Try adding only half as much soap and see if it opens then - even a little spilled soap catching on th ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher
I need the soap door replaced on the Sear Kenmore Elite Dishwasher 665.15954000. Does someone have this replacement parts?
Go to www.repairclinic.com they have everything and cheap. just give the model number and it will show you pictures of every part you will want. they sell individual pieces or ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
We have started experiencing a problem with our Kenmore Elite 655.15982 dishwasher. Each time we close the door, NoHeatDry lid would go on immediately. It would stay as is of would go flashing. If you touch any button, LockOn lid would go on. Then no other buttons would respond. And often both NoHeatDry and LockOn indicators would be flashing... We tried turning machine for an extended time on the fuse, etc. At times it would work for some time and then cycle get stuck again at the same p
These errors are due to a faulty control board and needs to be replaced. If its still underranty get it fixed before it expires as it is a costly repair to replace. ... Dishwashers
Kenmore elite dishwasher stops in mid cycle w/ normal wash just blinking and the control buttons will stop responding. At times you will get lucky the cycle will finish. Also included with this problem the soap dispenser actuator overheated and burned.
... Kenmore Dishwashers
Hi, I have Kenmore ELite 630.1630 (made by Bosch).. a. can i get a repair manual? b. problem (just last few days.. there is a rough residue (seems like soap) left on all (glass and st. steel). This comes out if I scrub it under the sink with water. c. Tried the test cycle from Bosch website.. it ends up with a code H. Any idea what may be going on?
Hello,\015\012\015\012Welcome to FixYa,\015\012\015\012The "H" indicates a heating fault has been detected, and based on your post it is likely the heater relay in the control itself.\015\012\015\012Th ... Dishwashers
I have a 12 year old Kenmore Ultrwash Model #665.15951790. I recently replenished the rinse aid dispenser and am experiencing an oversuding problem. It was oversuding to the point that suds were coming out the bottom of the door. Did notice that the blue rinse aid seemed to have leaked into the dishwasher due to a puddle of blue rinse aid at the bottom of the dishwasher. Have run a "quick rinse" cycle 4 times with no dishwasher soap added and still have sudsing. Can the rinse aid cause oversudin
... Kenmore 15129 Built-in Dishwasher
Leak My Kenmore elite has been leaking from the door. How can I fix this problem?
Hi bearadona,\015\012\015\012I'm Harvey the Master Plumber.\015\012\015\012Your question is: Your Kenmore elite has been leaking from the door. How can you fix this problem?\015\012\015\012First we need to know ho ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Water coming out front of dw at start of wash cycle. I leveled the unit. no luck. if you open the door during fill cycle the water does not shut off. also, may be a problem with float shut off working properly. what should I try next? Kenmore Elite 16579
Hi \015\012Check float to insure that it is free to move, it sounds like the dishwasher is over filling. That is assumed that you have not changed the type or amount of detergent being used.Also there is a probability tha ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103
Replaced soap dispenser kenmore elite ultra wash door leaks
... Kenmore 24 in. 15079 Built-in Dishwasher
We have an older Kenmore Elite 665. Recently it the dispensing cup for liquid detergent is not opening at the correct time. At the end of the cycle the dispensing cup is open with remnants of detergent still in it and white soap stain down the door. John
It appears your timer/main controller/CCU or wax switch in the dispenser has failed in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing. ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
My Kenmore Elite dishwasher leaves soapy residue on the dishes leaving them looking dirty., especially in the area of the soap dispencer. What can I do to resolve this problem?
Hi,The scum, film and white residue problems have started since the reduction of phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
Hi i have a problem with a candy 122, the problem is the soap door will not open to allow the soap tablet out? have cleaned it all and made sure all the jets are clean and the soap door opens up when operated manually. any help would be great please
Please read your instruction manual. If you do not have download from this web:www.fitness.manualsonline.com or www. retrevo.comGod bless you ... Dishwashers
Kenmore Elite I replaced most of my appliances 3 years ago with Kenmore Elite and I've had problems intermittently while the appliances were under warranty, but when the repair person arrives, no problem is detected. Once the appliance is no longer under warranty, the problem becomes persistent. At one point when I explained the difficulty, the technical support person said something to the effect of, "Oh that's an easy one to fix. All you need to do is...Oh wait, the warranty expired on the 3rd
Hmm, I'll start at the top :->. Well, first thing is that Kenmore doesn't manufacture any appliances. The only thing Sears has is the name recognition, therefore, they have GE, LG, Whirlpool, and others to make appliances for them and Kenmore s ... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher
Kenmore Elite dishwasher will not dissolve soap or wash well.
Temperature should be 140F. and the units heater should energize during fill to achieve this. ... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher
Kenmore dishwasher My Kenmore dishwasher model 630.16302401 is not successfully completing wash cycle. When I hit "normal" and turn it on, water enters the d/w, and the sprayers (both top and bottom), spray water. Approx. 10 mins. later, the water is drained. At that point, it appears that water never again enters the d/w to complete the wash cycle. In fact, the soap in the dispenser does get released, and the door opens. However, the soap will just run down the inside of the door and pool on th
... Maytag Dishwashers
Kenmore 587 I have a Kenmore 587.1414 that is only 2 years old. I can hear it filling with water and then after a while it will drain, but does nothing in between. After the cycle has ran completely, I can open it and the dishers have never got wet and the soap door is open but the soap has just ran down the side of the door. What could be wrong? Motor gone out?
I think you are right. That would be the most obvious answer. Some motors are warrantied for 2 years or longer. ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher
Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!
... Whirlpool GU2400XTP Built-in Dishwasher
There is soap left at the end of a cycle from the dispenser. It is trailing down the door and standing in a puddle at the bottom of the dishwasher. The soap that is not in the trap door seems to wash away, but not the soap that comes out once the trap door pops for the main wash. Any ideas on how to fix this or what could be causing the problem?
Try different detergent types--liquid instead of powder, capsules instead of liquid. Don't put large dishes near the door that might block spray. Check the spray holes in the spray arms for blocking. ... GE 25 in. Nautilus GSC3400J Free-standing Dishwasher