Having problems with your Kenmore 24 in. 17842 Free-standing Dishwasher ?

I can't get the faucet adapter to stay on

\015 What do I do there? the faucet adapter will not stay on. suggestions? perhaps I am putting it on wrong??? I have not used this before and there are no instructions- I am a renter and this is the dishwasher that is in my house. thanks.\015

Answers :

Yes usually you will need to repair because bracket inside wore down it cost you around 40.00 and is very hard to find after alot of reserach I found a local guy to help me and it works great , Take off retainer clip and thing will come apart both spring and bracket then you pull four clips out and replace all of the following
Repair Help & Product Troubleshooting for Kenmore 24 in. 17842 Free-standing Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I can't get the faucet adapter to stay on


Yes usually you will need to repair because bracket inside wore down it cost you around 40.00 and is very hard to find after alot of reserach I found a local guy to help me and it works great , Take off retainer clip and thing will come apart both sp ... Kenmore 24 in. 17842 Free-standing Dishwasher

Kenmore Ultra wash III will no longer stay connected to faucet after filling...what part should I replace the hose or the faucet adaptor? When we turn the faucet on to start up the dishwasher it falls off...when we finally get it to stay connected with water on...it will fill but then falls off again...get it to stay on, it empties, but then after it has completed filling up again it disconnects from the faucet.


If your adapter that hooks up to the faucet has 4 little white plastic jaws inside it then it can be rebuilt. there is a kit that replaces those 4 jaws, the spring, the attaching clip and the internal seal.. usually runs around 10 buks or so. if i wa ... Kenmore Dishwashers

Connector hose we tried to adapt the dishwasher hose so that instead of hooking it up to faucet, it connects to the the undersink water pipe, using tubing and clamps and a shut off valve. we can't get it to stop leaking where the clamp is. Are there adapter kits avail to do this? This way we wouldnt have to keep taking the hose on and off from the faucet.


The water pressure is too high in the intake for your kit. use a higher grade kit or reduce the pressure . ... Danby DDW1805W Designer Series Free-Standing Dishwasher

I have a Kenmore Quietguard portable dishwasher which does its job excellently. My problem is that I can't seem to find a proper spigot attachment in a standard hardware store, like Rona, that hooks up to it satisfactorily, or at all. On the faucet I had before I had to wrap the joint tightly with a big dishcloth or it would squirt all over the place. I have a new faucet now, and so far the dishwasher's faucet attachment won't even stay on when the water's running. I'm wonder where I can get th


... Kenmore 17259 Free-standing Dishwasher

The rince light stays on and it wont run, you cant get to any other cycle


Hi there,\015\012\015\012sounds like you may have a stuck key on the keypad. disconnect the power and check the keys on the keypad as well as the pin connector behind the keypad that plugs into the board behind it for any dislogged or be ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

The hose from my portable dishwasher won't stay on my faucet it slips off so I need an adapter for my faucet can't seem to locarte one the works for a kenmore portable diswasher model #665-1744990


... Kenmore Dishwashers

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher

I cannot get the hookup to stay on the faucet. I don't know if something fell off.


... Whirlpool 24 in. DP840SWP Free-standing Dishwasher

I have an excell xr2600 pressure washer and i cant get it to stay running. I put a little gas in the air filter box and it runs for a second. Can you help me out please


... Honda Pressure Washers

Starting problem will not stay running spray starter fluid will run till out, itis like it is not getting fuel new fuel added just cant keep it running. any suggestions/ Never had this problem before, thanks scott


I had the same problem and what I did fixed mine. I got it running with the starter fluid then pushed the linkage (Rod) on top of the carb and ran the engine wide open (by pushing the linkage), then released... then wide open again. I did this 4 or ... Karcher G3025OH Pressure Washer

Classique Dishwasher I have classique dishwasher its the biggest load of rubbish i have ever used - i have had 2 new ones due to buying new houses - they dont wash properly and the tablets either stay in the dispenser or smear everywhere - cant wait to get rid of it


... Jenn-Air 24 in. JDB8910 Built-in Dishwasher

GE portable dishwasher connector hose slips off faucet adapter


... Dishwashers

Portable dishwasher won't stay connected to the kitchen faucet


It the faucet connector has a lever u push in order to latch on to the faucet, just jam something under it so it maintains upward pressure and wont come unlatched when the water starts flowing ... Maytag MDB9600A Jetclean II Built-in Dishwasher

I have a magtag quiet 100 series that has a broken handle but still shuts tight and seems to lock yet. Problem seems to be that the rinse only light will stay on for quite a long time and won't let me hit the wash button. When the rinse only light does go off, if I hit the wash button it starts but then switches to rinse only. Sometimes I can get lucky and get it to stay on wash after the rinse button is off for some time. Any suggestions?


... Maytag 24 in. DWD1500A Built-in Dishwasher

We bought an aeg favorit 50674 dishwasher ,last week and yesterday i went to open the door to get the dishes out and the door wouldnt open.i tried again but noticed that it had caught on yhe side panel and was bending the panel.not wanting to make it worse i phoned the comit store that sold me the machine they said it was not their fault and wasnt covered on the warrenty .i still cant get my dishes out cant you help.thanks caz ivey


... AEG Dishwashers

Dishwasher problems I have a counter top dishwasher and it's not cleaning things like it used to i think its clogged but i cant get to the drain because it is in the bottom i tried draino but it didn't work i also tried unscewing the bottom but i cant get that part out i think there is somthing stuck in there.


First thing to check water hose that connect at back of machine. pull the screen out and clean it. use a pliers. I run my under water then use a q-tip if its clog to clean the rest.\015\012\015\012Then pour a cup of vingar in machine and ... Danby 22 in. DDW396 Free-standing Dishwasher

The adapter on my maytag portable dishwasher comes off the faucet when I try to run it sending water everywhere! We JUST replaced the adapter and hoses, $50 and not the problem. It seems that the plastic pieces (not metal balls) are wearing out as soon as they're used. Does anybody know what I can do or if that isn't the problem, could it be that I have the wrong end on my faucet????? HELP!!


If you just replaced the connector and it won't stay on, replace the adaptor on the faucet. ... Dishwashers

I have a prtable dishwasher. We are getting a new pullout faucet and I would like to add a dedicated faucet just for the dishwasher. Is there such a thing and if so, where can I get It.


... Kenmore 17439 Built-in Dishwasher

Have a dd603 with an issue...took off the arm and the metal silver disk (the ones with holes) to get to the wash impeller-(the thing with blue blades) the wash impeller will not spin-which I think is part of my problem, since i looked at the lower drawer and was able to spin the blue blades easily...was also able to pull it right out. Cant pull out the upper wash impeller!!!! Really want to get this fixed before my husband gets home and I get the lecture about how I purchased a cool looking d


Lol I don't know a lot about dishwashers, just do him good and tell him afterwards, and then hire a mechanic to look at it.Why would you want to pull the propellers off anyway? The top one doesn't pull off because it's screwed on, and the botto ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My brother needs the faucet adapter for his DDW396 counter top dishwasher (forgot to take it off faucet when moved). Have the quick disconnect but not piece for faucet. I tried to find it online for him but don't know which one is correct and Danby doesn't seem to have a parts store.


I did the same thing when I moved. I went to Home Depot and was able to pick up a replacement nozzle there. ... Danby DDW497W 22 in. Countertop Dishwasher

I have a kitchen aid dishwasher. The upper spray arm is getting water and getting enough water pressure but wont seem to spin. Ive ran a lot of tests but nothing. ive cleaned out the spray arm and port that gets water to the spray arm. Cant seem to fix it. Any ideas?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

I just bought the Danby DDW611WLED Countertop Dishwasher and the adaptor included does not fit on my faucet. I live in an older apartment. How do I know what size faucet adaptor to buy? If I do get one that fits my faucet, will it fit the Danby hose?


... Dishwashers

I cant get siemens dishwasher to work . An error E25 keeps appearing on the screen . What does this mean ? and how do I get rid of it and get machine to wash ?


... Siemens 24 in. SE20T590GB Free-Standing Dishwasher

I have a Kitchen Aid KUDS03CTSS3 dishwasher. Dirty water is staying at the bottom and nothing comes out the drain hose during the entire cycle. The drain hose is looped above the kitchen P-trap, although for a time it wasn't. I use a wet vac to get the water out but there is still water below the fine filter. I thought if I could get the fine filter off, I could clean out the bottom as I think that it's full of crud down there that may be blocking things. I can't figure out how to get the l


Hi,Thanks for the follow up. I am glad it worked out for you. If I can Help in the future let me know. http://www.fixya.com/support/c64627-kitchen_aid ... KitchenAid 24 in. KUDP02FR Built-in Dishwasher

Faucet adapter water leak, no water intake


... Danby DDW1899WP Portable Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0932 seconds