Having problems with your Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher ?

Have a 4 year old Kenmore Dishwasher Model # 74382. No problems at all until last week I went to start it and it would not turn on. Lights on the control panel were on with exception to the start light. I opened and shut the door to make sure it clicked and pressed the start button again and nothing. I tapped around the panel with the side of my fist and pressed it again and it began working. Well today different story I went to start it and it did the same thing. I tapped all over front of the


Answers :

The problem is more likely the door switch is failing or out of adjustment/loose. You will need to remove the door panel. This is easy to do. There is a video at www.appliancehelponline.com/servicemanual.html this will walk you thru the process and also show you how to test the switch.It's adifferent model but the procedure will pretty much be the same. You can also enter your model # for diagrams and illustrations of your specific model.
Repair Help & Product Troubleshooting for Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Have a 4 year old Kenmore Dishwasher Model # 74382. No problems at all until last week I went to start it and it would not turn on. Lights on the control panel were on with exception to the start light. I opened and shut the door to make sure it clicked and pressed the start button again and nothing. I tapped around the panel with the side of my fist and pressed it again and it began working. Well today different story I went to start it and it did the same thing. I tapped all over front of the


The problem is more likely the door switch is failing or out of adjustment/loose. You will need to remove the door panel. This is easy to do. There is a video at ... Kenmore 24 in. 74382 / 74384 / 74389 Built-in Dishwasher

I have a Whirlpool dishwasher model #DU920PFGQ4. The controls locked light is flashing, and when I press the air dry key for 5 seconds it won't unlock, however the cancel/drain light starts flashing. When I press the cancel key the controls lock light will stop flashing, but will resume as soon as I release the cancel key. I have tried disconnecting power for 24 hours, but as soon as I plug it back up it does the same thing. Nothing else on the control panel will work.


... Whirlpool Dishwashers

Hi. I have a Danby DDW396W countertop dishwasher brand new yesterday. We unpacked it, installed it onto taps, loaded it with dishes, and turned it on. That's where everything went wrong. When you turn it on, the display shows P2 and when you press the program button to change it, nothing happens. When you push the start button, nothing happens. What am I doing wrong? I know I'm missing something simple, but what? Please help. Katherine


Hello there and thank you for choosing fixyaThe p-2 code is a wash cycle that is the normal cycle for this unit please see below.Press the program button until the desiredprogram code appears in the display window.The ... Danby Dishwashers

Zanussi zdt6053 in built dishwasher not starting. When pressing the control panel on/off button the 65 deg normal wash light comes on. When pressing the program selection button nothing happens. When closing the door the machine does not start up. Is there a fault in the control panel circuit board? Would water pressure prevent the machine from operating?


... Zanussi 23 in. ZDi6053SX Built-in Dishwasher

Power is on, lock symbol appears in display panel of both upper & lower draws. On pressing lock button on either draw you hear a click however their is nothing else showing in the display panels & there is no response when pressing the power buttons or any of the other buttons. Every thing is completely dead. Is their a fuse or overload button?


Hi \015\012If the key/ lock symbol is showing in the display, then it is possible you have the child lock on. Disable it by pressing the key/ lock button on the panel. Press and hold the "Lock" icon again until o ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

Have a GE Quiet Power 3 Dishwasher. Went to reun it and when I closed the door no lights came on to pick a wash cycle. Nothing like it lost power. No buttons work, nothing. Opened door and removed inside door panel. Have power at door latch switch. Actually have power at all 4 connections and doesn't change when engaging switch as if door was closed. Switch does click but no power at front control panel. Whats up. I have my own Handyman/Home Remodeling business and I'm very good at fixing things


If your dishwasher is not running check the following \015\012\015\012You have already taken care of the 1st item.Power Supply The main power supply is the first thing to check. Also remove the toe ki ... Dishwashers

Won't start. Seemed to be working fine a day ago. Then in mid cycle I opened the door because I was on the phone and it was too noisy (normal noise). Now , I shut the door and press start and nothing happens. No lights on the instrument panel. Nothing. Thanks.


You may have simply tripped a breaker, but if not it may be this.This may be a faulty door switch. If you look into the door locking mechanism carefully, you can see a small plastic bulb located either to the right or left of the locking Jaw. S ... KitchenAid 24 in. KUDU02FR Built-in Dishwasher

For the GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher, I reset the breaker on the service panel, the unit is on but I press a wash cycle and press start and nothing happens. Is there a fuse inside the control panel of the dishwasher?


... GE 24 in. GLD5560LSS Stainless Steel Built-in Dishwasher

When pressing any front button on the control panel nothing will light up or start up in any manner,does look like it did not finish draining,have water sitting in the bottom. Pulled off front access panels no signof burned wires or anything becoming disconnected? do have small childern in the house pressing buttons? power is good going to unit.??


1)check any fuse blown in board.\015\0122)check supply to the board. ... Kenmore Dishwashers

My Maytag will not start. I have just replaced the PCB , the lights on the panel came on until I pressed the start button. The lights went out and I cannot get them back on.


I am sorry, but is it please possible for you to post the Model no. of your Maytag dishwasher. I am not able to see it in the chain of comments you have had with another Fixya.com consultant.\015\012\015\012Have you considered the possil ... Maytag Dishwashers

My 12 yr old KitchenAid -Sculptura-Model KUDR24SE starts to fills with water and then does nothing else. It will eventually go through the cycles on the panel, but nothing is happening inside. End result is still dirty dishes with water sitting in the bottom that has to be baled out. Cups on top rack don't have any water on the indentations, so it's obvious that the thing filled with water and that's it. I had the motor replaced (supposedly with a new) one 2 years ago so I find it hard to bel


... Dishwashers

I have a kitchenaid dishwasher, SS, model # KUDIO1ILBL6. When you press the ''normal'' button to run it, nothing happens. Tried other cycles and same thing, the green light goes on above the cycle but its just not starting. I tried resetting by opening, pressing high temp scrub then energy saver dry, high temp scrub, energy save dry, then close and hit cancel. Is there any other combo to reset it? or does it sound like something else is wrong? thanks!


... KitchenAid Dishwashers

I have a jennair djb1080awb that wont start. The panel lights up, but when I press the control panel nothing happens.


... Jenn-Air 24 in. JDB1080AWS Built-in Dishwasher

Dishwasher will not start when pressing the start button. Timer light flashed numbers and went off. None of the lights and buttons work. Circuit breaker in electrical panel is working. Does the on/off switch need replacing, or is it possible a mini circuit board is bad? Dishwasher installed in 2000 and is used on the average once per week.


As it is nearly 10 years old i would suggest you replacing the circuit board. To test exactly we would need the help of an continuity tester and multimeter. ... Bosch 24 in. SHU53 Built-in Dishwasher

I have a Whirlpool Quiet Partner II. The normal light is blinking. If I press start it does nothing. If I press cancel, the cancel light blinks too. We turned off the power and let It sit for a few minutes. Powered it back on and same thing.


... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My Electrolux FDB 2310LCC2 just went dead when I was starting it. The lights on the panel just went out, now nothing... Is there a fuse or something that needs to be replaced>


... Electrolux Dishwashers

Whirlpool dishwasher model GU2-400-XTB7 Problem started with display cycling through delay times. (1 hr, 2hr, 3 hr and so on.) Was able to cancel that for short periods and then it would repeat the cycle. Was able to run dishwasher by pressing different buttons. Then it would start a cycle but did not run full cycle. Now control panel doesn't work at all. When buttons are pushed, lights do not light up and nothing happens. Is stuck in lock mode.


... Whirlpool GU2400XTP Built-in Dishwasher

Flashing lights My GE model # GHDA455L00CS Quiet Power a dishwasher's lights are flashing when I start it, will not reset or in-take water. I've tried unplugging it and restarting. Nothing. Tried removing door door screws and press down door latch. Still nothing. HELP!!!!!!! IT WILL NOT PROGRAM. IT HAS A FLASHING LIGHT. WE HAVE BOUGHT EVERYTHING BUT STILL DOES THE SAME THING


It mite be the circut board problem..just  re-soldered a few of the pins in it and things will be back in working order. ... GE Profile PDW8400J Built-in Dishwasher

FDB520RHS2 Dishwasher Same problem as posted. Dishwasher has power & water - control panel lights are on, when start is pressed the sound of a relay can be heard but nothing else happens - no water fill no cycle. Unit stays in this condition without running.


... Frigidaire FDB520RHS Full Console Dishwasher with 4 Wash Cycles 4 Wash Lev

The control panel on my Electrolux/Icon dishwasher is not working. The only light showing is the red start/cancel light. When I press it to start, nothing happens and the light remains red. What could be wrong?


... Electrolux EDW5505ESS Built-in Dishwasher

Maytag dishwasher lights but wont run, I can select a cycle then press start and nothing. also the control panel lights stay on when the door is opened


... Maytag MDBH955AWS Stainless Steel 24 in. Built-in Dishwasher

My asko D3531, has a problem. The message panel is blank. When I turn it on, it sounds like it is draining, but there is not water in the tub. I cleaned the filters and didn't find any obstruction. When I press the start button for 3 seconds as directed in the manual, nothing happends. I can't get anything to come up in the LED display. Please help.


I have the exact same problem - Cindy did you ever figure it out? Please let me know.Thanks ... Asko 24 in. D3530FI Built-in Dishwasher

The last time I ran my MDB5100AWB, Quiet Pack, Maytag Jetclean Dishwasher, I stopped it shortly after starting it then went to bed. It hasn't run since. Nothing happens when I press any of the buttons; no lights, no motor, no reaction whatsoever. Is there a reset button? Any other suggestions would be most welcome. Thanks.


... Maytag MDB5100A Dishwasher

Frigidaire dishwasher Model GLD2250RD50: Stopped washing dishes when a ran the garburator full of water, panel lights of high temp and nearby started flashing, then I pressed cancel/start, lights went out the washer wont run, checked breaker no problem. door latched,


... Frigidaire 24 in. FDB510LC Free-standing Dishwasher

Gld4260l00ss has power. there is light indicators on front panel, but when press start button, nothing. new inlet water valve solenoid installed last month and unit has ran fine until two days ago. I have unplugged power and plugged back in but no help.


I would remove the control panel and ck the ribon form the touch pad to the control .it is very common for these connections to fail remove the ribon and re insert it and try again . also ck the touch pad and make ... GE GLD4260LSS Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0923 seconds