Having problems with your kenmore dishwasher model 665.16022401 ?

specifications

I need the dementions

Answers :

Repair Help & Product Troubleshooting for kenmore dishwasher model 665.16022401

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hi i recently started to have issue with my dishwasher. The issue is that the washer stops in the middle of the washing cycle. More specific, once i start, it stops about 20 second latter. Once i push the door of the washer it start to work again for another few seconds any ideas?


There is some mechanical problem.Check water flow. Free rotation of spray arms. Refer user guide. ... Dishwashers

Have a Kenmore Freestanding Dishwasher that was working when hooked up to the sink. When we plumbed it in and connected the electrical directly, we now get an "F4" flashing on the panel with a beeping noise and the pump sounds like it wants to drain but just get a sucking noise. I've tried putting water in it to prime the pump, but still doesn't want to work. Do the codes mean anything, or point to a specific part?


... Kenmore 24 in. 16332 / 16334 / 16339 Free-standing Dishwasher

Kenmore ultra wash III specifications


... Kenmore Dishwashers

A built in whirlpool dishwasher is leaking around the door seal, right side to be more specific. cleaned the seal, and along the bottom and it still leaks. Is there an adjustment that can be made to tighten the door. I wouldnt think it would be the seal itself do to being less than 2 years old. Thankyou for this service.


Hi,There is no adjustment per say on this door or seal. If water spray directly on the door it can cause this, what I mean by that is if the spray arm, either the upper or lower is stuck and continually sprays in one place it can cause th ... Whirlpool Dishwashers

Water spills out of the dryer vent when i open the d/w door after a cycle. Why is this and what can I do? If I have to remove the door, specifically, what screws do i remove? Thank you. Maureen


Hello,\015\012\015\012welcome to Fixya. \015\012\015\012The issue is likely just the blower and housing drain hose blocked with "dirt" from time & use.\015\012\015\012First things first...**turn off th ... Miele G892SC SS Dishwasher

I need to replace the springs for the door of my Asea Skandia Cylinda 1200 dishwasher. Can anyone please tell me the specifications for the springs so I know what to ask for when purchasing new ones?


Hi, welcome to FixYa.\015\012\015\012I have complete specs. and part numbers on my home PC but I am away for a few more hours. \015\012\015\012If you wouldn`t mind waiting a while ( 3-4 hrs. ) I can certainly help you.\0 ... Dishwashers

I have a Kenmore Elite Ultrawash 17283402 and have problems with the panel board. right now dishwasher won't go on at all. Pots & Pans is lit and Heated Dry. Start does nothing. Is there a specific reset for this dishwasher? I don't want to pay service man $100 just to come to my house if there's something I can try myself


Try unplug for 10min. if not helps look like control panel ... Dishwashers

I just purchased a used portable dishwasher-Kenmore model 665.744120. Could you please tell me what year this was made, & any specific info on it? Thanks a lot! Heather from B.C.


... Kenmore Dishwashers

Frigidare dishwasher is flashing PF but breaker isn't tripped. What is wrong? Specific info is "Gallery Dishwasher 900 Series" Model # FDB949GFS2 The 2 green lights over the "Hi Temp Wash" and "No Heat Dry" are also flashing


Ok,\015\012\015\012I realize your breakers may not have been tripped, But I am going to tell you what the code is and what it means. PF "power failure" this happens when you had a loss of power ether long term or ... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

We have just purchased and installed our dishwasher. Towards the end of the cycles it has a very high pitch noise when the heated drying cycle. Is this normal, or is there something wrong? It is VERY annoying - it reminds us of a 'ringing in the ears' noise. Also - is there a listing of time for each cycle? It seems that it runs a LONG time in each cycle that I have tried - with or without any specific instruction, i.e. heated dry. Thank you.


Hello. This dishwasher is definitely not functioning properly. Call the store where you purchased it and report the problem. Because it is under warranty you have rights. You should return it [this would be my choice] or have the store sen ... Dishwashers

Oil I have a Briggs and Stratton 2200 psi pressure washer. It doesn't specify an oil ~ other than to show a photo of synthetic pressure washer oil manufactured by them. I can't find that specific brand anywhere, what can I substitute it with? Ace hardware was stumped.


Remember when your searching for something you can't find the internet is always your best bet. You should also use a good search engine; www.bing.com is one of the best search engines I have ever used. I searched some stores that have the oil your l ... Briggs & Stratton Briggs Stratton 2000 Psi Pressure Washer Freeshp

Miele dishwasher does not turn on? Is this electrical or something specific w/ the dishwasher.


... Miele 24 in. G680 Built-in Dishwasher

We just moved into a home with this dishwasher and the dishes just don't come out very clean. There is a "lot" of residue food left on the dishes. Could I be stacking it incorrectly or is there a specific detergent that I must use. Thanks


Trky taking one cup of vinegar and put in the dishwasher and run it on wash cycle without anything in the washer and see if this helps you sounds like it is clogged up and not moving the water. Not an expert on this but this has worked for us. ... Fisher and Paykel 23 in. DD603H SS Free-standing Dishwasher

WHAT ARE THE THERMAL FUSE SPECIFICATIONS FOR KENMORE ELITE MODEL 66513122K701SERIAL NUMBER FY1211868 AND WHAT IS THE PART NUMBER FOR A THERMAL FUSE KIT? WE HAVE HAD TWO FUSES BLOW AND THERE DAMAGE TO THE WIRING ON THE LEFT HAND SIDE OF THE CONTROL PANEL THAT CONNECTS O THE SWITCH. THEIR IS DISCOLORATION ON THE PARTS AND WIRING. WE HAVE SEEN EXPERTS STATE THAT IN ORDER TO CORRECT OUR ISSUE WITH THE FUSE BURNING OUT WE NEED A THERMAL FUSE KIT AND WE NEED THE SWITCH AND THE WIRING THAT CONNECTS TO


Http://appliancejunk.com/ge/dishwasher/31-9137.pdf\015\012\015\012A ... Dishwashers

Hotpoint dishwasher My dishwasher is only new and its doing prewash to quick and the red light for salt refill in constantly on even though it is filled to the specific mark


... Hotpoint 24 in. DF56 Free-standing Dishwasher

Tricity Bendix DH090 water valve closes too early. Insufficient water causes program to stop before first heating cycle. If I switch off, open the machine & pour an extra pint of water in, shut the door & switch on again the wash takes place and completes perfectly to specification. OK so the problem seems to be that level detector No 1 switches off the water inlet valve early and level detector No 2 (apparently) halts the cycle since it detects insufficient water in the machine. I cannot see t


... Tricity Bendix 18 in. DH090 Free-standing Dishwasher

My 1998 GE dishwasher leaks. Into the floor, now I see stains on the ceiling below. What to check? Door seal is fine. The dishes get washed. Pressure is good to go. No water out of the front of machine, seems to be coming from below. Take panel off and inspect connections? How about line from sink? Is there a site with illustrations or video repair about this specific problem out there? Any help is greatly appreciated...


Check the water connection at the valve to the dishwasher. If the dishwasher only leaks when used then the motor seal is damaged. If leak is constant the the leak is at the supply to the dishwasher from the water supply at the valve\015\012 ... Dishwashers

Our Frigidaire Dishwasher model gld2250rdb3 has stopped getting all the dishes clean - specifically tall glasses have small bits of food left on them if they are washed in the top rack


If there is not enough water, the dishes would not get cleaned. This could be caused by a partially closed water shut-off valve (located under the sink), or a faulty dishwasher water valve (located at the bottom of the dishwasher, behind the kick pan ... Dishwashers

What is the Recommended Oil Specification for a HONDA G300


Hi.\015\01215w40 for the honda engine. normal multigrade oil.\015\012in real low temps you can pick a 10 or 5 w\015\012good luck ... Karcher 2500 PSI Pressure Washer

I have a MDB5130AWW model dishwasher and it has worked extremely well up until a week ago. Now there is water sitting at the bottom of the dishwasher, and the "Clean" and "Rinse Only" buttons are blinking. I've read the manual, and ran the Automatic Function test, and it seems that these two buttons blinking indicates a Motor problem, specifically a low current problem. Please Help!


You may have a seized/stuck motor. Turn the electricity off and remove the lower panels. Take a flat head screw driver and carefully attempt to move the motor impellers. If the impellers feel hard to turn continue to try and free the impellers. I ... Maytag Dishwashers

What is the tipping point for replace rather than fix, specifically for a 10 year old kitchenaid superba dishwasher?


Now lol when the repair is a 1/4 of a new one ... Dishwashers

F4 error fisher & paykel nautilus dishwasher sometimes this error comes up and it seems to occur about 10 minutes from the end of the cycle. it doesn't happen all the time. the user guide does not specifically address this error code.


F4 is a heating error- dishwasher has not reached temperature in allocated time. If intermittent fault, problem is usually with electronic board, which has temperature sensor attached. Sometimes the wiring to the control board burns out and can give ... Fisher Dishwashers

Dishwasher smoking Started cycle, everything seemed fine. Opened it to put something in and when I closed it to restart it sounded strange. Then the smoke starting pouring out of it and it smelled like something electrical burning. I immediately turned the wall switch off. It is a Kenmore, not sure of the model at this time. Is this a common occurence like if a specific part went out? Thanks for your time.


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

Can u give me the specifications of this gas range


... Caloric 24 in. CDU510C Built-in Dishwasher

Pressure washer schematic on ser.#580752600, mdl #1008442913, psi 2600, 7.0 hp ohv intek platinum plus, specifically the pump schematic?


Go to Managemyhome.com and under manuals type in the number 580752600. The manual is 28 pages long and can be downloaded. The parts list section specifically the pump is towards the end of the manual. Let me know if you need more assistance ... Craftsman Pressure Washers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0130 seconds