Having problems with your Kenmore Dishwashers ?

Need to replace the (110) plug on a dish washer

\015 I need to replace the (110) plug on a dish washer. (3 prong w/ ground) Is the plug something I can get at a hardware store and install myself? or is this something more complicated and needs an electrician.\015

Answers :

Any hardware store has a replacement.
\015\012You can do it.
Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need to replace the (110) plug on a dish washer


Any hardware store has a replacement.\015\012You can do it. ... Kenmore Dishwashers

Dish washer Hi there, Last time I started my dishwasher, clear water spilled out in a large amount. We pulled the washer out to realize some plastic parts underneath had totally smashed down. Is it possible to replace those parts, or do I need to buy a new washer?


Yes youcan replace them just give dishwasher name ? ... GE Dishwashers

Won't start I have checked the spark plug and I have good saprk. I have checked the fuel sysstem and the primer bulb injects fuel. I have removed the head and cjecked for engine damage and all cycle correctly. Vaves opne on time piston shows no dmagae. side walls are smooth and not damaged. This engine was working fine but the pressure washer needed some O rings replaced. I have tried to start it with and without the pump attahced. Evrything on the engine looks fine. I removed the spark plug and


... Briggs & Stratton Briggs Stratton 2550 Psigaspressure Washer

I have a Bosch dishwasher (SHE46C06UC/46) and this is the third time it has plugged up and flooded my floor. I don't clean the dishes before putting them into the washer, but I don't load it up with big garbage either. I need to know how to figure out where the clog is and fix it. I can't easily remove the washer from the cabinet.


... Bosch Dishwashers

The cable to the door of my GE Potscrubber 900 dish washer (model GSD900L-02) broke. I purchase the replacement cable and now need to know how to reinstall this new cable. The replacement parts include two cables and two springs. Can you provide a "visual" of how this cable connects to the lower left corner of the door???


Question, my cable just broke yesterday. Where did you buy the part? ... Maytag Dishwasher

Does not get dishes etc. clean no matter how loaded. Must pre-wash by hand to get all food off or will not come out clean. Why have a dish washer? Is there any secret to how to get it to clean? Or do we give up on this thing and replace it. Only 3 years old. Any recommendations? We assummed the newer dishwashers would not need pre-rinse by hand but would clean.


Hi,This is a good washing machine if it is working properly. There could be a couple things that have happened to make this not work well. You should not have to pre-wash or rinse anything, just scrape and load. First thing is ... Whirlpool GU2400XTP Built-in Dishwasher

Kenmore dish washer leaks thru the door, need replacement seal.


I dont know what models but several models leaked thru the soap dispensor in the door.They were recalled. Check the manufacture for your model. ... Dishwashers

About a 3 year old maytag stainless steel inside dishwasher, not cleaning, often soap resdue on dishes or silverware, I use fresh new cascade, checked to see if washer fills with hot water, seems to up to the bottom of the door when I open durning cycle, arms go around, no obvious plugging of the screens, no junk in the foot chopper propeller, no paper or plastic or food in the jets of the arms. Motor went out on it 9 month ago and I had it replaced by appliance repair station here in Missoul


Water must be 130 Deg F to wash properly. ... Maytag Dishwashers

HI there dish washer wont fill Ichecked fill valve its ok but there is no 110 volt reading to wires but when i remove purple wire from water valve and put ground wire to fill valve water comes in the dishwasher please tell what needs to be replaced thanks


There may be problem with your door switch/lock mechanism,be sure to check the main power supply to the dishwasher.\015\012if you have a electronic control board it might also have to be replaced. ... Dishwashers

I have a ge dish washer model gsm1800jbb and the handle latch (WD13X10030) had to be replaced...well it took a while to get it in and now we are not sure how to wire the wires. There are 2 white and 2 black and 6 different prongs so I am not sure which way to plug them in to make it work properly. It worked fine before it got stuck closed and wouldn't open, that's why we ordered the whole assembly. The way I have it wired it sounds like its working...water goes in and drains put but the


... GE Spacemaker 18" Built In Dishwasher - GSM1800JBB

Thes door that holds the dish washer liquid needs to be replaced


\012\012Hi,\012That\012is not that hard to fix and you can easily buy the parts yourself\012online...Here is a tip that will help you with the online\012buying...How to Buy ... Dishwashers

The dishwasher goes through the entire cycle and beeps when it is done, however no water ever enters the washer and the dishes are still dirty. What part needs replacing. Thank You Vince


... Bosch 24 in. SHX46A02 / SHX46A06 Built-in Dishwasher

Frigidaire built in dishwasher model PLD2855RFC1. Have to wash dishes pretty much spotless prior to using dishwaser. Glasses come out with what appears to be soap residue regardless if powder or liquid. Did not use a gauge but water pressure in rest of house is good, recently replaced water heater, pressure regulator and just replaced the dish washer water source valve. Washer is about 18 months old, has never worked really well.


Hi, \012\012I have an older dishwasher also and recently my wife also complained about it not cleaning right... so me being the man I am tried in vain to clean the things... Bought new spray arms online and ins ... Frigidaire PLD2855RFC Dishwasher

I have a Karcher 550M pressure washer and was using today when all of a sudden the water started to pour through the handle hence lost the pressure of the water. Is this a rubber washer issue or the gun needs replacing or simpler than that. To be honest although I have had the washer for about 3/4 years now It is hardly used. Also can I fix it and where would I purchase the allen key to replace. Thanks Brian


... Karcher Pressure Washer Gun 91120200 91120200

I need a replacement black washer that fits inside the unicouple of a GE portable dishwasher - Model # GLC4400R05WW. I still have the white o-ring, but the black washer got lost. Does anyone know what size, etc. washer I need to be in search of?


... GE GLC4400RWW Portable Dishwasher

Asko d1976 soap dispenser doesn't open/deliver soap during the cycle - no error codes/water pumps & drains ok Do I need to replace the module or is there a wax motor that needs replacement? Is there a service/repair manual out there for askos? I also have an asko washer (6021) & dryer (T721) so having a service manual would be handy!


... Asko D1976 Built-in Dishwasher

Hose (High Pressure) (not inlet or outlet hoses)coming from inside the pressure washer has a hole in it. Needs replaced. Is this a part than can be easily replaced or does a new hose need to be made?


... Honda Black Max 3000 Psi Pressure Washer

We need to install a new 645208 Dispenser in a Bosch Dish Washer so how can we do this


... Bosch Dishwashers

Dear All, I need you help I have a Bauknecht Dish washer and few minutes after program start, it stopped and Dish washer make a very strange noice like to try to start again but it can not. Michael


... Bauknecht 24 in. GSX7551 Built-in Dishwasher

Washer won't wash dishes. We had to replace the lower basket and everything seemed to be the same. I had replaced the pump and motor assembly about 4 years ago and now all of a sudden dishes are not coming clean. It is model DP8500XBN0.


I dont know if you replaced a drain pump or a circulation pump but that sounds like the problem ... Dishwashers

I have a karcher pressure washer 1800 psi i bought from walmart it was running good until i had a power surge with the plug in. what can i do can i change the fuse in the plug or do i have to open the pressure washer up and replace a fuse.... thanks


You will have to take the cover off & look for melted wires or a fuse.\015\012if there is no fuse the capacitor may have been cooked.\015\012it should be a white cylinder.if it has been damaged it will have burn marks and may be swollen. ... Karcher PSI Electric Pressure Washer

I have a Bosch dish washer model SHX 43 M 0 ZUC / 48 FD 8709 00169 The dish washer is about 1 1/4 years old and was installed by a plumber as part of a Home Depot kitchen remodel. The problem is draining. The quick wash does not drain at the end of the wash. The regular wash sometimes drain and sometimes does not. The auto wash does drain. The lack of draining does not cause problems with the regular wash cycle. I checked the drain hose re the instruction manual and it is correctly installed.


Usually a brush with a flexible shaft will do the trick...\015\012\015\012Like this venturi tube cleaner (available where gas grills are sold)\015\012\015\012 ... Bosch Dishwashers

Samsung 9E Error - Low Water Level. Dishwasher has worked fine (10 months old). Confirmed adequate water supply/availability. When opening the dish washer after error, the inside has no standing water. I can hear the dish washer initially fill. This happens later in the cycle (maybe 10 mins in) Should I replace the fill switch/sensor. Is there any info available on how to fix it my self. Appreciate your help!


... Dishwashers

Assembly I recently purchased a pressure washer from Home Depot. It is rated at 3100 psi. It is a comet pump with a honda gas engine. The assembly instructions recommended that I remove the plug on the top of the pump and replace it with a vented plug that was provided. However, none of the other enclosed manuls talk about the vented plug. Am I reading the assembly insturctions correctly. Should there be a vented plug ?


HI your machine would have been delivered with a blanking plug in the pump. You will need to remove this and fit a vented pump or your pump will build up too much pressure inside. ... Comet BXD2527 Pressure Washer Pump

On 2/18/09, I had a part replaced (due to a recent recall issue) on our Bosch dishwasher, SHU43C06UC. I had not had any problems with my dishwasher - ever - and, since the replacement, my dishes are not being properly cleaned. The Sears repairman who replaced the part tells me that the part he replaced has nothing to do with my present issue and, because my DW is no longer under warranty, I would have to pay for any further services he may provide. 1) What do I need to do to troubleshoot this di


Http://www.boschappliances.com/safetyrecall/dishwasher/default.aspx?pid=BCH0905OIQ001 ... Bosch 24 in. SHU43 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1399 seconds