Having problems with your Kenmore Dishwashers ?

Kenmore dishwasher starts but doesn''t do anything

\015 My Kenmore 363.14391992 dishwasher starts and makes normal buzzing sound but doesn;t do anything. No water comes, nothing moves just makes a normal sound. The other day I left it on like that and after a while I started get a slight smell that it was burning. We had a similar problem in the past. The maintnance guy came out and just fliped something underneath. It took him 3 mins total and we paid 85$ for it. Please help\015

Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have a Kenmore Ultra wash dishwasher Model # 665.13733K601 and serial # FW18136133. came home from work yesterday and the pots and pan button and the normal wash buttons were flashing alternately. When I pushed the cancel button it started to flash, then I pressed the smart wash button and now its flashing. I turned of the breaker for awhile and then back on and the lights weren't on right away but later started flashing again, and I can't get the dishwasher to do anything. Any help on my pro


Hi,\015\012That unit took a power surge and the control is now bad....those controls can all of a sudden go wacky and the usual cause is power problems...\015\012The only way to fix it will be to replace the control...\015\012 ... Dishwashers

Noisy dishwasher my Kenmore quietguard 4 has developed an exceptionally loud hum/buzzing noise seemingly coming from the door of the dishwasher, when closed, locked and put on either drain or wash cycle.If the unit is allowed to sit for 1-2 days, the drain cycle will empty the tub without the buzzing noise starting. If anything else is attempted afterwards, like a wash cycle, the noise immediatley starts at a low level, then becomes steadily louder, until the full volume is reached, and does not


I have aloud buzzing nose and humming what is the problem ... Dishwashers

Kenmore dishwasher starts but doesn''t do anything


... Kenmore Dishwashers

I have a Kenmore dishwasher, and when we shut the door, without starting a ccyle or anything, the motor will start going!! When we do start a cycle, it will get stuck at some point during the cycle and won't sanitize or show the "clean" display light as being lit.


... Kenmore Dishwashers

Kenmore dishwasher 16934 will not start up for me. I can push any button to set the cycle(pots & pans, china gentle, quick rinse, normal wash) and the time shows up in the display, but when I push the start, two red horizontal lines appear in the time remaining display. Cannot get the machine to start anything. All cycle buttons give me some kind of time remaining display but as I said, it ends up with 2 red lines. Thanks in advance. Mark


... Kenmore 24 in. 16934 Built-in Dishwasher

Kenmore 17369 When cycle starts... it sounds terrible (crackly sounding).... doesn't sound like the water is coming into the dishwasher. If I add water to the machine during a rinse cycle...it will wash and drain on its own.... Then I hit cancel. Please help.. I can't locate the owners manual.. Do you know where I can get one.. I understand that you can open the bottom up and see if there is anything lodged in the bottom of the dishwasher. Please help! thanks Cheryl


The problem is your water inlet valve. If you remove the panel at the bottom of the dishwasher you will see\015\012either a copper hard pipe, or a flexible steel hose leading into the\015\012water inlet valve.BE SURE TO CUT OF ... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher

Hi there I have a LD-1204 Dishwasher and most of the time it works fine but every now and then it wont turn on or it will turn on but when I got to press start to start a wash it doesnt do anything. Can you help me please


... LG Dishwashers

Kenmore Dishwasher Model 665.15912001 Heating element doesn't seem to be heating. Wash cycles are loooooong and the drying cycle doesn't exist. Easy fix or buy a new dishwasher? I haven't tested anything yet. Should I start with the thermostat or the element itself?


Hi. i would test the element first. this will be the likely issue.First, open the doorand look into the tub and locate the heating element (if it is covered, remove the lower dish rack and cover). The heating element has two termina ... Dishwashers

I have a Kenmore Dishwasher. Model 665.13793K601. When the units starts, It tries to pump out the water. Then the start button turns red and dosen't do anything else.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Dishwashers

I have a kenmore dishwasher model 66515832000 and it starts to do the cycle and about 10 seconds into it it stops and the quick rinse light starts flashing, it wont cancel or let anything else happen. if you open it and shut it , the light just flashes and nothing will work.


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

GE Quiet Power 3 dishwasher stuck on rinse cycle. Pressing reset doesnt work, trying to start wash cycle doesnt do anything. Any ideas?


... GE Dishwashers

I have a Kenmore Type 575-0 Dishwasher, model number 665.16033401, Style 16033. It runs trough the cycle, once the cycle is complete the clean mode light is on but most dishes are still dirty. I had someone here to repair this about a year ago. All he did was press alternating two buttons, which I have tried, it resets and lets you start a new cycle. However, the problem remains. Last time there was only button pressing involved, no need to replace anything. So, I would hate to have to pay ag


You need an electronic control and heating element ... Dishwashers

Our dishwasher is a Kenmore Ultra 17039 and it has recently started to make a high pitched noise when on the wash cycle. It is still washing but the noise is extremely loud. We cannot find anything loose in the machine.


Thant is usually a damaged pump impeller making the high pitch noise, you can order a impeller repair kit and replace it. ... Dishwashers

My Maytag Jetclean Dishwasher Model # MDB4010AWB Serial # 16163916uk is stoping midcycle, it doesnt make any noise or anything just stops. Water left sitting in bottom and have to open door then close to start again , stops again after a few minutes


Possibly a bad door switch losing contact, only after opening nad closing is it making contact again. part number for door swtiches and holder 99002254 retails for a about $25 ... Maytag Dishwashers

Kenmore elite dishwasher won't drain, water stand in bottom. It doesn't sound like pump turn on. We tried to start a load and cancel it to see if it would empty. Didn't hear anything after we pushed cancel button


... Kenmore Dishwashers

Kenmore dishwasher #66513109k902 not starting at all after last cycle no clean/sanitze lights were on at all now it wont do anything no breaker tripped either


... Kenmore Dishwashers

I have a mh65m2 moyer diebel dishwasher at the resturant and some days it works great and other days it doesnt but here in the past two weeks it hasnt been going threw all the cycles one day it stays in the rinse cycle and other days it stay in the soap cycle is there anything i could do to restart the machine or fix it because it is really starting to cause the restuarant trouble? please help me if you can.


... Dishwashers

Kenmore Ultra Wash Dishwasher (Mod: 665.1373) makes bad noise after the tub fils and the pump starts running. (Not sure how to describe noise.) Bad pump? Other? I have checked for anything obstructing rotating parts and that is definitely not it. My guess is something wrong with the pump, but not sure. If so, I'm wondering what my options are. Like are their common problems with pumps that can be fixed at home? Replacement?


Definately sounds like a pump on its way out. Probably not the pump itself - but the starting capacitor.However it may be cheaper for you in the long run to have a professional out to diagnose the problem instead of throwing money into it blind ... Dishwashers

The dishwasher turns on but doesnt do anything after hitting start button


... Kenmore Dishwashers

I have a kenmore dishwasher model number 66513729k600 and has the start resume, cancel drain, and the normal wash blinking lights and doesn't do anything i unplugged for several hours and is the same. what can i do???


... Kenmore 24 in. 16032 Built-in Dishwasher

Belling Dishwasher IDW450. When turn on power button it starts bleeping. About 25 times. The you can select your program, it sounds like it is draining but then doesnt do anything else. Cant hear any water running in. I have turned the power off and back on. Water is connected


When you say you have turned the power off and back on. do you mean the switch on the appliance. if so turn off the power by removing the fuse from the fuse panel for the dishwasher. wait about ten minutes, put the fuse back in and see if that res ... Belling 24 in. IDW603 Built-in Dishwasher

Sears kenmore dishwasher mod. #665.17269402 when i opened the door the clean light never went off. now it seems like it wants to start or drain but doesn't do anything.


... Dishwashers

Baumatic (BKD62SS or BKD62W .3) Dishwasher will not do a normal load but will run in a strange start up mode I found. When I press the power button, select a cycle, then press start the dishwasher will no longer do anything. 5 seconds after pressing start it will make a light hum noise, a little like heating water. After about a minute the dishwasher won't have done anything. It will then beep 30 times with the third led on the set of four (don't know what it means) will flash a lot. The beeps t


... Dishwashers

Kenmore dishwasher # 665.16362301 works but started making noise


... Kenmore Dishwashers

I have a Kenmore Elite dishwasher circa 2003 - will not start


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2083 seconds