Having problems with your Kenmore Dishwashers ?

I cannot get the attachment on my appt. size

\015 I cannot get the attachment on my old kenmore appt. size dishwasher to fit on my faucet! model # 587.784100 serial # 3868170 catalog # 78418\015

Answers :

The hose fitting goes onto an adapter that screws on to your faucet. You have to have the piece on your faucet for it to work. As best I can recall, once both pieces are in place, you pull down on the locking collar on the hose, put it on the faucet and relaese.
\015\012Best regards, --W/D-- please feel free to rate this solution..thanx!
Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I cannot get the attachment on my appt. size


The hose fitting goes onto an adapter that screws on to your faucet. You have to have the piece on your faucet for it to work. As best I can recall, once both pieces are in place, you pull down on the locking collar on the hose, put it on the fauce ... Kenmore Dishwashers

Unable to fit new door panel to front of dishwasher. Have removed old one with great difficulty and now cannot figure out how to get new one on. Have placed the fittings from old door onto new one in exactly the same place but am baffled as to how it attaches. HELP!


Im not sure what new panel you are trying. But if you can still get the old one back on, you can get different panels, color, and designs from applianceart.com. they also custom cut stainless panels to fit or they have a stainless foil that can cov ... Whirlpool GU2400XTP Built-in Dishwasher

Do you put the clear hose in the bucket with the cleaner to get it to come out of the spray nozzel? If you dont use the low pressure attachment will the cleaner still come out or not? I cannot find an owners manual for my model


You must use the lowest pressure nozzle with the clear hose in the solution or you will not get soap. Make sure you use only the solutions approved for your pressure washer!. ... Briggs & Stratton Pressure Washer Projectpro Spray Nozzle

Can't get the hose attached to a Chore Master 2400 Power Spray


... Pressure Washers

I cannot get my dishwasher to run. It is stuck with normal and cancel lights flashing. I cannot get them to stop or it to run. What do I do?


It sounds like the main panel circuit board is messed up....it needs to be checked and replaced if necessary. ... Dishwashers

[email protected] i cannot get the child lock to turn off and i cannot get the dishwasher to star


Please provide the full model number of our kitchenaid dishwasher.\015\012have you tried turning the power to dishwasher off and back on again from the mains switch.\015\012\015\012Childlock can be turned off by pressing the childlo ... KitchenAid Dishwashers

I am babysitting at my daughters house and I have the loc light on and I cannot get rid of it. I am trying to start the dishwasher and cannot get it to go.


Look at the control panel there is a button that has a picture of a lock or a child by it, that is your child lock button, hold button down until lock light goes off ... Frigidaire FPHD2491K Builtin Dishwasher

We have Frigidaire model # FGHD2433KB1. The problem is that we cannot select a mode to get it to start. We unplugged it and the light for China Wash lights up, but it will not start. The number 92 appears in the window on front appears for about 5-seconds and disappears for about 30-seconds and does it all over again. We cannot get it to start.


... Dishwashers

Cannot get my control buttons unlocked. I have a ge profile that is about five years old. I cannot get the heat dry to go off.


Try unplugging the dishwasher and waiting 30 sec and plug back in ... GE 24 in. Profile PDW9880JSS Built-in Dishwasher

Hi there I have a Miele G663 scvi dishwasher. The inlet/outlet light is flashing. I have cleaned the non return valve and filter at the bottom of the machine. I have also removed the water inlet pipe which has a large filter on at the end where it attaches to the water pipe. I have blown through this pipe and it is quite difficult to get air through. Do you think it is a filter that is blocked? If this is the case are they easy to attach to the bottom or the machine or would I have to get


... Miele 24 in. Incognito G663 SCVi Built-in Dishwasher

Bosch SGVV53E03GB/55 cannot get panel door off


Remove grey plastic screw covers from each side of the door and unscrew the exposed 2 inch screws. Open door fully. Looking from above there are 10 screw heads visable. Counting from the right hinge and going clockwise, remove two inch srews going i ... Bosch 24 in. SGV53E03 Built-In Dishwasher

I have an aeg favorit4001ovi dishwasher and the beeping alarm keeps going off not long after cycle starts it doesn't even get to the point where the tab gets used. this happens alot have had engineer out and suggested that the sprinkler jets are blocked. have checked and checked these, nothing in them. cannot get it to complete a wash at moment . only just over a year old!


... AEG Dishwashers

My brother-in-law put Dawn dishliquid into my dishwasher and I cannot get rid of the suds. Is my dishwasher ruined or can you tell me how to get rid of this mess. When I turn it on to try and run clear water through, it runs all over the floor. Thank you for any help you can give me...


Ooooohhhhhhhhh nnnnnnnnooooooooo!!!!!!!!!!!!!!!!!!!!!!!.go get some vinegar and pour it in the d.w itself your gonna have to start and stopit for a while but the vinegear will cut thought the suds pretty quickly, stand a shallow bowl upright and fill ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

We have a commercial Hobart dish washer Model # AM-8T2; Serial # 240461. We cannot get the wash temperature to go above 120' to 150' as the burner does not light. The pilot is on. A new thermocouple was installed but made no difference. The rinse temp goes up to 180'. How can we get the gas burner to light and stay on. Thank you. Gery Spory


Hello Gery - get the repairman back who installed that thermocouple as that repair includes making sure the unit is working properly. Most likely the thermocouple is simply not warming up enough to operate correctly. It may be that the pilot light ... Hobart Dishwashers

Our GU2500XTPQ6 Gold quiet partner III begins a cleaning cycle but then different numbers appear on the minute countdown and the cycle never finishes. Once it gets to this point, you can only get it to drain. You cannot reset the cycle. We were once given a series of buttons to push to reset the control panel but don't know where it is. Can you help?


Yes call the manufacturer and ask for the code again ... Whirlpool 24 in. GU2500 XTP Built-in Dishwasher

Have an dishwasher that i need to tilt back to get it finish the cycle.It gets to a certin point in the cycle then stops. i looked it up on the net and this has been a nice temporary solution but I need to figure this one out. Ts a free standing bosch but i cannot find the exact model number anywhere. Can you help.


Go to appliancepros.com to find your model it sounds like the water pump is failing they have a 800 number where they can help you figure out whats wrong and what model it is for sure. hope this helps you. ... Bosch 24 in. SGS47E02 Exxcel Free-standing Dishwasher

How do I remove the main conduit on my GE Triton XL dishwasher? The cover inlet that traps food from going down the drain somehow came off and clogged up the drain. I got the drain cleared but cannot get the cover back on and need to move the main conduit (pipe connecting lower and upper arms) before I can get it on. Anyone know before I spend too much $ finding someone to fix it?


... GE Dishwashers

The pull start broke off when I was starting the pressure washer. I bought a new coil w/handle but I can't figure how or where to attach it. We took off the face guard and I'm staring at this big circular silver thing which I'm assuming starts the engine. How do I get that off and what do I attach the sting to. Thanks!


... Honda Maxus Pressure Washer MX5222

I was given a low hour, 10 year old, CH PW205002LE 6.5 HP gas vertical shaft 2000 PSI/2.5 GPM pressure washer with a Lavor pump. It did not work - no pressure. I found a broken o-ring on the brass unloader valve and replaced it with a ring as close in size as I could find as the part break down doesn't state size. Everything was very clean. I coated everything with silicine grease and reassembled, seating the brass piston? as deep as it would go. I had to press the trigger in order to get the mo


My personal experience is that 40% of all the sellers I dealt with on e*** exaggerated their products or worse. If you decide to go the e*** way be sure you put it on a good credit card so you can get your money back if it's a bust. Don't use your ba ... Campbell Hausfeld Pressure Washers

We have a kitchenAid dishwasher -- just installed last year new-- we cannot get the rinse aid low light to go off. We have filled it up to where it can no longer hold anymore and the light is still on. I have tried to cut the power on/off and it still remains on. Any suggestions on how to get the light to go off? thank you.


Check to see if the "Heat Dry/Lock" button is lit up. If it is, press the button and hold it for four seconds to unlock your dishwasher controls.Close your dishwasher door firmly and press the "Cancel" button. Wait two minutes for your Ki ... KitchenAid Dishwashers

The upper spray arm on our dishwasher has become detached from the back of the machine, and there is no obvious means of reattaching it. Are there some clips perhaps that have snapped on the part which attaches to the back wall of the d/washer (part number PP-TD20 - it's a 4 by 1 1/2 inch long rectangular shape with rounded ends) or does this piece somehow need to be taken apart (how - i can't see how i might do this?) and the transparent 2nd layer underneath get attached first? Thanks, Sarah.


What exactly the brand / model of your unit.?Let me know.Thanks ... Dishwashers

I have a Bosch SHU033A diswasher that is not draining. I have checked the lines but cannot figure out how to get to the drain pump. I have turned on its back but there seems to be no easy way to get the large white plastic bottom removed so that i can access the pump.


Hi\015\012\015\012\015\012 \015\012\015\012Thanks for using FixYa. First check whether the drain is not clogged or blocked and\015\012the line is not kinked. Check all the hoses for blockages & also clean the\015\012air gap. If you h ... Bosch Dishwashers

Cannot get Maytag Jetclean Dishwasher-Quiet Plus will not start at all. Push the buttons and get nothing. The circuit breaker is not tripped. Is there a reset button or something like that.


... Maytag Dishwashers

Have a kitchenaid dishwasher KUDS25SHWH1 - the child-lock light came on and will not go off. It is a light and no button to push and hold except all of the select buttons for the type of wash you want, no air dry button. How do I get this light off?? The Child Lock light has come on by it's self and I cannot get it to turn off. I have never used this feature before. I have tried to hold the Energy Saver button for several seconds but the Child Lock light will not shut off. The dishwasher is loc


Unplug the unit for 15 minutes then plug it back in. This should reset all your computer system and make everything work again ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

What size door goes on the NEFF s41m50 dishwasher? we want to replace our existing Bosch semi integrated dishwasher that is 16 years old and want to know if it is the same size door to attach?


... Neff 24 in. S4443 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0992 seconds