Having problems with your Kenmore Dishwashers ?

Wont drain after wash!!! - Kenmore Dishwashers


Answers :

3 possibilities for a no drain...1 the unit has an extended drain hose and the coupling between the factory hose and the extended hose is plugged.
2 the drain is plugged inside the unit at the drain outlet, 3 the drain pump has failed. not likely the pump, usually a plugged drain line, so check the drain hose first to see if it is plugged.

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore dishwasher 15791 wont drain - Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173


There's a few things you can look into that won't cost you any money. \015\012\015\012First, manually remove as much water as possible and then check the\015\012sump area for paper or any other large object clogging the drain. A cup\015\0 ... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

My Kenmore Dishwasher Model # 665.13832K601, wont change from wash cycle to dry cycle. It stays on wash until you stop the cycle and drain the water


... Dishwashers

Wont drain after wash!!! - Kenmore Dishwashers


3 possibilities for a no drain...1 the unit has an extended drain hose and the coupling between the factory hose and the extended hose is plugged.2 the drain is plugged inside the unit at the drain outlet, 3 the drain pump has failed. not like ... Kenmore Dishwashers

I have a Kenmore dishwasher that will not pump water through the spray arms. It fills ok and drains fine but wont go into the wash cycle? Any idea of possible problems


Look inside of the dishwasher to be sure that the tubes leading to the spray arms are not disconnected. If those tubes are in place, then the problem is with the main motor/pump in the base of the unit. That Kenmore part is about $150.00 plus labor ... Kenmore 15762 Dishwasher

My kenmore ultra wash 665 dishwasher wont drain


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

My Maytag Dishwasher mdbd880awq wont finish a wash cycle. It will wash and rise then when there is 32 minutes left it wont drain and wont dry the dishes, It just makes a clicking sound. I have to dry the dishes by hand and then use the rise only cycle to get the tub to drain. The drain only doesn't work either


... Dishwashers

Dishwasher hums I have a 2003 Kenmore Elite Ultra Wash Dishwasher model #665.17469300. I started the wash today. The water came in the unit and started washing then I heard it stop and it just started making a humming noise. I was afraid it was going to overheat or something so I cancelled the washed and it drained out. I started the unit up on a different cycle and the water came in the unit but did not wash it just hummed so I cancelled and drained it again. I did that on all cycles and the sa


... Kenmore Dishwashers

Kenmore elite dishwasher model 665.13153k701 At end of wash cycle, water does not drain completely. Intemediate drains during wash do drain completely. rinse and hold drains completely. watching water at end of wash thru disposal, water flow cuts off like valve closed. other drains taper off


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore dishwasher wont drain , but pump runs fine


... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

My Kenmore Elite dishwasher did not drain the water out of the bottom after the dishes were washed last night. Could I possibly have pushed a wrong button to keep it from draining, or do I have a problem? All the dishes were clean. Should I run it through another wash cycle? I've got water standing in the bottom of my dishwasher.


Yes , If the program controller has hung it would have skipped the drain cycle. So try to redo the cycle and see if the drain works, is not check the program controller and the drain valve/pump.- if there is food particles that have clogged and block ... Kenmore Dishwashers

Noisy dishwasher my Kenmore quietguard 4 has developed an exceptionally loud hum/buzzing noise seemingly coming from the door of the dishwasher, when closed, locked and put on either drain or wash cycle.If the unit is allowed to sit for 1-2 days, the drain cycle will empty the tub without the buzzing noise starting. If anything else is attempted afterwards, like a wash cycle, the noise immediatley starts at a low level, then becomes steadily louder, until the full volume is reached, and does not


I have aloud buzzing nose and humming what is the problem ... Dishwashers

Kenmore dishwasher My Kenmore dishwasher model 630.16302401 is not successfully completing wash cycle. When I hit "normal" and turn it on, water enters the d/w, and the sprayers (both top and bottom), spray water. Approx. 10 mins. later, the water is drained. At that point, it appears that water never again enters the d/w to complete the wash cycle. In fact, the soap in the dispenser does get released, and the door opens. However, the soap will just run down the inside of the door and pool on th


... Maytag Dishwashers

Water wont drain out of bottom of tub. The dishwasher works fine, it just wont drain the dirty water out. If I restart it to wash again, the dishes are washed in the dirty water.


Hi, A clog in the drain line or air gap (if there is one) is the usual reason that a dishwasher won't drain. Often the problem is at the point where the drain line attaches to the garbage disposer or househ ... GE Nautilus 24" Built-in Dishwasher

My kenmore dishwasher wont run through the wash cycle.


... Kenmore 24 in. 15252 / 15254 / 15259 Built-in Dishwasher

I have a kenmore ultra wash mod# 665.13492k600 dishwasher that in the last couple of days will not drain the last cycle . If you push the cancel /Drain button after the cycle is finished it will then drain but all the dishes have soap spots on them and are very wet .I have checked for clogs but cant find any I have also run a lot of water throug our waste disposla because the dishwasher drains into it help ??


... Kenmore Dishwashers

We have a Kenmore Ultra Wash Dishwasher Model number 665-13859K601. The Normal wash and the Cancel (drain) buttons are flashing red on the control panel. No matter what we have tried, we have been unable to correct this problem. Obviously the dishwasher does not function. When you close the door the lights keep flashing and no button combinations seem to do anything. I have looked at the troubleshooting guide that came with the dishwasher, however there is no


... Dishwashers

Hi, I have a Kenmore Elite dishwasher and the water drains out by itself and understand that water should stay in there during and after the wash. When washing, the water drains out and then the pump runs but has no water to wash with.


Hi,\015\012\015\012Can you tell me what the drain is connected to. Regardless of the "loop" if the entry to the home plumbing is below the water line in the dishwasher it will continue to siphon, or drain as you described it. ... Kenmore 24 in. 15079 Built-in Dishwasher

KENMORE ELITE ULTRA WASH 665.1379 WONT DRAIN AND NO LIGHTS


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore elite dishwasher wont drain due to oversudsing


... Hotpoint 24 in. HDA3700G Built-in Dishwasher

Cant start the wash cycle on my kenmore precision quiet standard dishwasher my wash cycle blinks and wont start the wash cycle


... Dishwashers

Wont dry Hello, I have the Asko D3112 dishwasher. It washes great, but does not dry completely. After a wash everything is still drenched as if i splashed in a bucked full of water. I know it drains properly (i hear it draining down the sink), and it attempts to dry (hot air). I also am using the rinse aid as specified in the manual. Any tips would help. thank you Andrew


Make sure you select a high temp wash and the heated dry as well Also, dont put too many plastic items in there at once, they dont dry very well in anything. Check the amount of soap you are using, it shouldent be more than 2 tablespoons (way less th ... Asko 24 in. D3112 Free-Standing Dishwasher

We have a Kenmore Ultra Wash Dishwasher (model #16359) - purchased 7 years ago. During the wash cycle, when the machine is draining, a loud cracking sound come from the sink drain. What could be causing this?


... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

I have a Kenmore dishwasher model #17519200. I loaded it last night as usual and closed the door. I pressed the wash cycle I wanted and pressed the start button. I heard it starting to fill with water as usual. After it filled with water it should have gone into the wash cycle mode but it just started making a buzzing noise for about a minute or two then just stopped. I pressed cancel to drain it and it drains fine. I have kept trying to re-run it but it just does the same thing I described.


... Dishwashers

Kenmore dishwasher ultra was quiet guard 3 model 56516012403 control panel will not activate red lights blinking on normal wash and cancel drain. did the hold the heat dry button then the normal wash button, it stopped the blinking but the dishwasher will not engage when you push any button


That would be model # 66516012403 correct??you may have inadvertently set the lock on function.. check this out from your manual...Lock OnUse the Lock On to prevent unintended use of the dishwasherbetween cycles. Y ... Kenmore 15912 Built-in Dishwasher

I have a kenmore ultra wash dishwasher and it doesn't seem to get to the dry cycle. Left on it will wash and drain and repeat over and over. I have to manually press the drain/reset cycle to drain the water.


... Kenmore 24 in. 16182 / 16189 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2170 seconds