Having problems with your Kenmore Dishwashers ?

Were is the selnoid valve on the kenmore ultra wash


Answers :

Under the front of the machine on the left. turn off the power at the main electric panel and remove the toe kick inspection panel. You will see the incoming water line and the valve there.
Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Were is the selnoid valve on the kenmore ultra wash


Under the front of the machine on the left. turn off the power at the main electric panel and remove the toe kick inspection panel. You will see the incoming water line and the valve there. ... Kenmore Dishwashers

Where can i get a sceamatic for my kenmore ultra wash deluxe dishwasher model #665.13832k, we need to know the oms reading that should come up when we test the fill valve. thank you for your help on this.


... Kenmore 16764 Dishwasher

My Kenmore Ultra Wash III dishwasher 665.1584990 will not drain. Checked drain hose at both ends and disposal opening and no clog. Pulled check valve and no clog. When running cancel/drain function sounds like working but will not drain manually. What can I check next?


My Kenmore Ultra Wash III won't open the water valve. The pump starts and the heater turns on, but no water. Any ideas? ... Kenmore Dishwashers

Replace water inlet valve on kenmore ultra wash dishwasher


... Kenmore 24" Built-In Dishwasher with Ultra Wash HE Filtration

Replace water inlet valve on kenmore ultra wash dishwasher


... Kenmore Elite 24" Built-In Dishwasher with Ultra Wash HE

How do you replace water inlet valve on kenmore ultra wash dishwasher


... Kenmore 24" Built-In Dishwasher with Ultra Wash HE Filtration

I have a portable kenmore ultra wash 2 bought used, I see where drain hose ends up at with some type of valve at end in sink area (that also hooks to faucet) but what is supposed to direct water into sink looks like it would spray out


... Kenmore 17252 Free-standing Dishwasher

Kenmore 17539 ultras wash dishwasher does not fill up with water.


... Dishwashers

Kenmore Ultra Wash III Dishwasher will not drain properly


From the sound of things, your dishwasher drains faster than your sink drain ( via the garbage disposal) can drain it off.. You may have a problem with the way your sink drain/trap is vented and there is too much back pressure to drain down quickly.. ... Dishwashers

Kenmore Ultra Wash III Dishwasher will not drain properly


Fixerfailure, is the knock-out plug still inside if the garbage disposal inlet?\015\012\015\012Stick a screwdriver in there to make sure.\015\012\015\012spazmo1969, could be the rubber flapper is broken off in the pump dischar ... Kenmore 24 in. 15932 Built-in Dishwasher

Installation Check Valve Sump Pump Ultra Wash Dishwasher Model No. 665.13739K601


... Kenmore Dishwashers

Can't clear Kenmore Elite Ultra Wash flashing ''Smart Wash'' ligh


... Kenmore Dishwashers

Kenmore Elite Ultra Wash QuietGuard 7 skipping washing cycle.


... Kenmore Dishwashers

Kenmore Ultra wash model 665 17779990 normal wash comes on after door closed and about a minuet starts flashing,any suggestions??


... Kenmore Dishwashers

Kenmore Ultra Wash 3 (6651694193) stuck in wash cycle


Hi,\015\012 There should be 2 thermostatic switches in the heater area. They are just simple bi-metallic "button" switches.\015\012One will trip at the correct temperature - and tell the programmer to advance now the water is hot enough. ... Dishwashers

Kenmore dishwasher type 573-D, model 665.16034402. Items on top rack don't get washed. Items on bottom rack are washed fine. Appears top sprayer and maybe middle sprayer aren't getting water. At rear of washer, top rubber flapper valve (which feeds middle sprayer when top rack is in raised position) is stuck open, bottom flapper valve looks OK. We use top rack in raised position so this doesn't seem to be the problem.


... Kenmore Dishwashers

Dishwasher hums I have a 2003 Kenmore Elite Ultra Wash Dishwasher model #665.17469300. I started the wash today. The water came in the unit and started washing then I heard it stop and it just started making a humming noise. I was afraid it was going to overheat or something so I cancelled the washed and it drained out. I started the unit up on a different cycle and the water came in the unit but did not wash it just hummed so I cancelled and drained it again. I did that on all cycles and the sa


... Kenmore Dishwashers

Kenmore ultra wash quiet guard dishwasher, the pots and pans and the normal wash button are blinking. The start and cancel and smart wash out tons have a faint light glowing. Thoughts? I tried the sequence of pressing heated dry, normal wash, heated dry, normal wash and that did nothing. I've flipped the breaker too. I was in process of taking it apart to clean filter, thinking that would help, but lost my manual and now I can't get that off to flea either:(. Sig


... Kenmore 24 in. 15689 Built-in Dishwasher

I have a Kenmore Elite Ultra Wash HE. Model #66513122K701. Serial #FY0310281. Purchased New 1/31/09. It only works for a full wash cycle on on 1 hour wash. Super Wash and Normal wash both stop mid cycle and leave dishes sopping, dipping wet and with green light blinking. Been doing this almost its entire life...has ahd control panel replaced once under warranty...but if it is a factory defect...they probably just repaced it with another defective part...what to do? What should I do.


... Kenmore Dishwashers

Kenmore Ultra Wash Dishwasher LIghts are blinking....


I suspect for either of these units that the timer control boards are bad. ... Dishwashers

I have a Kenmore Quiet Guard Ultra Wash and the lights on control panel are blinking green. It's the Smart Wash, Normal Wash and Light Wash lights that are blinking green. Dishwasher won't sta


... Dishwashers

I have a Kenmore ultra wash quiet guard 3 dishwasher with a Hi Temp Wash that won't stop flashing. I've tried shutting off the circuit breaker and every code button sequence I can find including pressing Hi temp wash, heated dry, hi temp wash, heated dry...but it won't stop blinking..always blinking...Anyone have any other suggestions to reset this?


... Kenmore 24 in. 17019 Built-in Dishwasher

Dishwasher: Kenmore ultra wash sensor quiet guard plus. I'm in a rental so I don't have the manual or model number. A few days ago it just wouldn't start the wash cycle. When you press normal wash then start the no heat dry and lock lights flash every other second or so but nothing happens. I can hit the cancel button and it will make sounds like its trying to drain, and after about 5 minutes stops. I've done the heated wash/ no heat dry sequence to try to reset but no luck. Also tried turn


... Kenmore Dishwashers

Kenmore Ultra Wash model #665.1374* purchased 1/26/08 electronic control pad doesn't work properly - one wash cycle works (no matter which cycle is selected, it defaults to same one - light wash) - "washing" and "drying" cycle lights don't work -


... Kenmore Dishwashers

My Kenmore ultra wash dishwasher model 665.1374 will only work if I press the restart button. When I do it goes to pots and pans with the drying cycle light lit. I cannot get the smart wash, normal wash, or quick wash buttons to work.


... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1180 seconds