Having problems with your Kenmore Dishwashers ?

My Kenmore 665.13744K601 is making a loud noise. Can you send me instructions to see if something is caught in the bottom?


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kenmore 665.13744K601 is making a loud noise. Can you send me instructions to see if something is caught in the bottom?


... Kenmore Dishwashers

My Maytag MDBH965AWW Legacy Series 300 is making a loud grinding noise. I took off the lower spray arm and other parts below it to see if something was lodged near the chopper blade. What I found was broken plastic pieces from the bottom of the filter/flowplate assembly. It appears that the chopper blade is coming in contact with the filter/flowplate assembly and therefore the chopper blade is chopping away at the bottom of the filter/flowplate assembly. What do you think the problem is? Ho


Here is the break down view of what you have. The only way to fix this is to get to the chopper and tighten things up. Look at the photos and you can see the chopper and how to do it, it's a bit of a job...Remove Chopper Sleeve by using I ... Dishwashers

Dishwasher is making a loud grinding noise when it's started. Doesn't matter the cycle choice; the cycle starts as normal then once started up starts making a sort of grinding noise as the water is pulsing, like something is stuck or blocking the "push" of water. I couldn't see anything stuck in the bottom - any thoughts before I call a repair person? I've never owned a dishwasher before - maybe there's a basic drain/blockage thing I should check out first? And, any recommendations for repair


... Maytag 24 in. MDBH970AW Built-in Dishwasher

My dishwasher makes a terrible grinding sound during most of the cycle. When it first starts up it does not, then after about five minutes it starts in. It it very loud and continuous. We have taken the screws out of the bottom and check to see if anything was caught in it. Nothing was there and it still grinds. The dishes are spotless, but the sound is terrible. Any suggestions? Thank you. Alice Henning


Check the wash pump maybe have a foreign object inside of it or check the pump motor for possible bearing problem. ... Estate Dishwashers

Had my Maytag dishwasher for just over 2 years. Lately is has been making a loud grinding/vibrating noise - like something is stuck. I actually pulled out a piece of a plastic twist tie or something and thought I had solved the problem. Worked like a charm for a couple of days and suddenly the sound is back - and worse! I've read here that you should remove the bottom piece and make sure nothing is stuck before calling service. I'm the woman that's going to do this and could use some guidance ..


... Maytag 24 in. MDB4651A Built-in Dishwasher

Vibrating noise when running the dishwasher. No error messages on the display. We looked to see if something was caught in the bottom, but don't see anything.


YOUR BELT IS GOING BAD. ... Dishwashers

My maytag mdc4650awb portable dishwasher has been making alot of noise during the wash cycle. when it is washing it make a whining/grinding sound. when i add a little bleach it silences or sometimes almost silences it. i think something is caught somewhere and don't know where to begin disassembling. detailed Laimen termed instructions would be great.


... Maytag Dishwashers

Is the bottom spray arm suppose to rock when you spin it around. It's like it hitting something. Can it be taken off to see if something is caught under it?


Hi,Yes, it can be taken off but usually they get loose because they wear...you should replace it...it does not cost that much and is easy to fix...check that other parts with it are not broken also and it is a good idea to purchase related part ... KitchenAid Dishwashers

BOSCH SHE43 Dishwasher My Bosch D/W makes a loud high-pitched squealing sound at the beginning of the cycle and for a few seconds intermittently while running. I have checked and cleaned the filter, made sure there are no obstructions in the bottom and I am stumped. I have only had it a little over 2 years, spent a small fortune on it and really hope it isn't something super expensive. Does anyone have an idea of what the problem could be?


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Based on your description...as soon as you said "loud high-pitched squealing sound"...is where I knew what you`re talking about.\015\012\01 ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

How do I disassemble the impellor unit at the bottom of the dishwasher? I suspect something is caught underneath it. There doesn't seem to be any screw on the top (all I see is plastic).


... Maytag 24 in. MDB6100A Built-in Dishwasher

My fridgidaire FDBB944CS0 when closed makes a loud clicking noise for about 4 secounds. Then it just doesnt work. I checked the breakers and its fine. I can see that power is going to the dishwasher but something is obviously wrong????


... Frigidaire 24 in. FDBB944C Built-in Dishwasher

Kitchenaid Dishwasher model # KUDS25SHBS1 has started making noise. Noise happens when unit is draining so perhaps its the same mechanism that houses the grinder. Can definetly hear a clicking as something spins around to drain the unit. I have removed the washing armature and plastic skirt around bottom and felt underneath the skirted area, but don't feel anything caught or jammed. Noise is getting louder as more draining cycles are being utilized (i.e. as we use the machine more). Anyone have


Looks like motor noise. Check the pump. ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

Loud Screaming!! My kenmore cleans fine, but makes an ear piercing screaming sound during the wash. Was told by an appliance guy something could be caught in the impeller. Could this be the case and how can I fix it?


Try turning the impeller by hand (one finger should do it) with the machine off to see if you can feel any drag on it. \015\012This thing should turn very easy and rotate a little on its own if you spin it up a bit. They are normally not direct ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Dishwasher makes a loud noise when I turn it on. Sounds loke something is caught in the moter


... Whirlpool DU1300XTV Builtin Dishwasher

Loud grinding noise sounds like something small and hard is getting caught in some kind of rotary. The sound comes from underneath the dishwasher at or near the motor. I screwed the big circular plastic filter on the bottom of the inside of the dishwasher, but found no significant debrie. It did not resolve the problem.


... Jenn-Air 24 in. JDB1090AWS Stainless Steel Built-in Dishwasher

Makes loud noise off and on when running like something is caught. Nothing is visible and I don't know how to remove the center spray head to check below where the drain is.


... Kenmore 24 in. 17512 Built-in Dishwasher

My 14 yr old Magic Chef Model DU4K seems to be leaking (it is dripping into the basement just under where the dishwasher is located). it started when the arm at the bottom of the dishwasher did not seem to be moving so my husband took off the bottom "grill" to see if maybe there was something under there preventing it from spinning. It started to leak when he put it all back together (the bottom arm is still not spinning)


Being 14 years old I dought if spares are still available for this machine personally at 14 I would rather replace the unit if you are not in a possition to replace it you could advise from your local appliance repairs as to weather parts are availab ... Dishwashers

Dishwasher will not drain there is a bunch of water in the bottom. Tried running it through the cycle to make it drain out but still nothing just water in the bottom. Checked the sink and garbarge disposal to see if anything was blocking it or clogging it up but got nothing. Any suggestions?


Most likely a bad drain valve solenoid.\015\012It is attached to the side of the motor.\015\012The GE solenoids tend to burn out. ... GE Dishwashers

My 5-year old Bosch dishwasher leaves a somewhat fine grit on dishes? especially obvious on the inside of glasses. I use only Cascade detergent, use a rinse aid, don't overfill the machine, and always make sure that the filter at the bottom of the dishwasher is clean. I also make sure that the spinner is able to move freely. But, after all of that, I sometimes get very clean dishes; even more often, not. I see no rhyme or reason. I am presently looking at an entire load that has gone through


I have the same problem with mine!! It's 6 years old, and I'm running loads of dishes through twice. Even that doesn't help! And I rinse the dishes too, so I have no idea where all these "crumbs" are coming from. Will check back for updates. Hope to ... Bosch 24 in. SHU6802UC / SHU6806UC Built-in Dishwasher

I have bosch shv57c03uc/40 built in and the water is not draining on the bottom I already took the spout in the center out to see if anything was stuck but I did not see anything would you kindly suggest something else before I call someone to service it?


Hi,Here is a tip that I wrote that will help you with your dishwasher not draining problem...Dishwasher ... Bosch 24 in. SHV57C03UC Built-in Dishwasher

My kenmore/whirlpool dishwasher makes a noise, sort of a grinding noise, throughout most of the cycle. I have removed the pump and motor thinking that their might be something in the pump, but there is nothing there. My guess is that the motor is making the noise, but I do not know how to tell other than by replacing the motor and seeing if the noise goes away.


Hi Thank You for usingFixYa. To start with check the pump and try to clean it out, then check drainhose for any obstruction. Also check for a bad bearing on the spray arm. Ifstill the is ... Dishwashers

Humming noise i have a GE nautilus GSD2200 model which has not been used more than 4 years that is giving me trouble.  it's making a loud humming noise (the noise comes and goes, comes and goes) which seems to be coming from the motor area at the bottom of the unit.  I stopped it in the middle of the cycle, but the water seems to be stagnant at the bottom.  any suggestion on fixing the problem myself?


I have seen this SOOOOO many times in my 35+ years in the appliance repair industry.......it is very typical....here you are this is an answer I provided someone with the exact problem not to long ago..............This is a t ... GE Nautilus 24" Built-in Dishwasher

We purchased an expensive top of the line Fisher and Paykel 2 dryer dishwasher when we did a total Kitchen rehaul over 1 year ago. We have been noticing water sitting in the bottom of the bottom drawer that smells like sulfur dioxide and now see water is making its way through the maple cabinet to below the sink. None of the plumbing under the sink is leaking. We also purchased a Fisher Paykel gas oven/range at the same time. We notice the oven does not appear to close completely with a tigh


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. If you have water leaks around the base of your dishwasher,\015\012you may be using a detergent that is ... Fisher and Paykel Dishwashers

Dishes are not coming clean they have grit on them at end of was I just got a new dishwasher and dishes DO NOT come out clean. I tried a few different detergents, and I see that something is wrong with the dishwasher. It doesn't clean well. I'm so disappointed. Is there something I can do that will make the dishes come out clean?


Clean the dishwasher use one cup of blech then change the type of dishwasher cleaner ... Frigidaire PLD4375RFC Dishwasher

When I started it, it made a loud grinding sound which continued whenever it was actually washing/rinsing. It was washing and rinsing the dishes ok. Eventually I didn't hear anymore grinding but the dishes had not been washed or rinsed. The detergent cup was open and the detergent spilled down the door. I ran it again and could hear the pump running. It ran through the cycles but the water was not being circulated. I suspect that something is caught in the disposer blade or something and is bloc


What is the brand and model number. it likely will have to be disassembled to clean it out. is it a built in dishwasher or a stand alone type ? ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1256 seconds