Having problems with your Kenmore Dishwashers ?

Door spring repair/replace - Kenmore Dishwashers


Answers :

Go to appliancepartspros.com and get schematic and parts you need for your model number
Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Hello! I have a Kenmore Dishwasher Model # 665.15805890. The dishwasher came with the house and I'm guessing it is around 10 years old. My toddler was having a great time flipping the door to the soap dispenser back and forth until he pulled the door off of the pin. Now, I can't seem to position the spring in a way so that the door will spring back. I never looked closely at the hinge before, so I don't know if that is the only reason the door will not release the detergent, or if something


Hi.Please see if the diagram here can help you. Check if the spring is that indicated with nr ten in diagram. ... Kenmore Dishwashers

The spring-loaded flip-up door for the soap dispenser on my Kenmore dishwasher is broken. It seems the spring has come undone. I have had two repairmen come by and neither could put the spring back in. It seems senseless for me to get a new dishwasher just because of this stupid little spring. Help?!!


... Dishwashers

Kenmore 15765 dishwasher door spring - Kenmore Dishwashers


... Kenmore Dishwashers

Kenmore Elite Dishwasher model 665.1379. Door falls open. We think the spring broke. Does this model have a door spring balance kit?


... Dishwashers

I have a kenmore dishwasher that is 18 years old not sure of the model my wife tells me that the door seems heavier than before I am thinking a spring has let go if so how do you change the spring or fix it


Most likely the spring or springs that help the door up are broken. Usually, if you remove the lower front panel (usually 2 screws hold it on) you can access the springs. If they are broken, try your local appliance repair store for new ones. If they ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

How to spring on the dishwasher door - Kenmore 24 in. 16693 Built-in Dishwasher


... Kenmore 24 in. 16693 Built-in Dishwasher

I want to replace the door spring in an old Kenmore dishwasher, but the screws to remove the bottom panel are flush with the kitchen cabinets. Can I move the dishwasher forward about an inch to expose the screws?


Hi and welcome to FixYa, Initially, pls check the piping works and the drainage connections by visually inspecting these. Normally cabinet works at the sides should allow you this. Additionally, pls make sure that the electrical connecti ... Dishwashers

Kenmore elite Dishwasher Model # 665.16293400. When you open the door it drops to the ground with little resistance. Door spring broken? How do you fix it?


Good Morning\015\012\015\012a few questions....\\\015\012\015\012are the hindges broken also plus the springs?\015\012\015\012If you are handy with tools I am sure you can do this yourself.\015\012\015\ ... Dishwashers

Kenmore dishwasher door spring 3379383


... Kenmore Dishwashers

Door spring repair/replace - Kenmore Dishwashers


Go to appliancepartspros.com and get schematic and parts you need for your model number ... Kenmore Dishwashers

Need a diagram showing installation of side springs for a kenmore dishwasher door model #665.1670591


... Dishwashers

KENMORE ELITE LIMITED EDITION DISHWASHER door spring broke


... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

Kenmore 665 door spring cord pulley - Dishwashers


... Dishwashers

When opening and closing our kenmore elite dishwasher the door springs make an awful creaking sound, how can this be fixed


Liberally lubricate hinges, spring and any other relavant parts with WD-40.\015\012\015\012Charlie ... Dishwashers

Door spring unhooded - Kenmore Dishwashers


Hi,\012That\012is not that hard to fix and you can easily buy the parts yourself\012online...Here is a tip that will help you with the online\012buying...How to Buy ... Kenmore Dishwashers

How do we install a door balance kit on our Kenmore Elite dishwasher? Model is made by Whirlpool I understand. The plastic pieces are broken. The wheel and the spring are okay but the plastic piece on the string is broken and another plastic oval shaped piece broke as well. We plan on ordering a kit but don't know how all of the pieces go together.


... Kenmore Dishwashers

Kenmore dishwasher elite door opens too fast, broken spring?


Could be that, the spring may have unhooked or it could be a defective damper connected to the door. Remove the side panels and check the operation of the door mechanism. (This will probably require the removal of the rear panel to gain access to t ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

KitchenAid KUDI10FL dishwasher- The door spring system broke and I repaired it, but now all of the sudden the dishwasher will not start. The door may have been dropped a couple of time before the spring system was repaired, but it did not hit the floor, just a hard sudden stop. All of the cycle setting lights come on when they are pressed except for the start button. Just before the start button stopped working the dishwasher started by itself or started several hours after cycle selection had b


Hi- It is possible that the door latch is not completely engaging. If the door dropped the hinges may have bent a little thus preventing a good contact with door switch. Try pressing and holding the door shut, hard, and pressing start. If that wor ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a Bosch dishwasher, model SHU9915UC/U11. The spring mechanism on the detergent door cracked, and I bought the part to replace it. I took the front cover off of the dishwasher to determine how to replace it. Two white plastic "things", maybe spacers, fell out. I need 2 things: a) how to gain access to the spring on the detergent door so that I can replace it, and b) how to put the door spacers back on. An exploded parts view would probably help a great deal. Michael J. Orr


Hello! This is Guru...Saailer...I have your information...Due to size limitations I'll need your e-mail address in order to send it to you...Send an e-mail to me and I'll send an exploded view diagram and parts list...Guru...saailer... ... Bosch SHU9915UC Dishwasher

I found the problem with my dishwasher, a spring in the handle (154556703 Frigidaire Dishwasher Door Latch) had broken. All I need is the spring, not an entire door latch assembly. Is there any way I can get the part number for the individual spring? V/r Matthew Quirk


... Dishwashers

I have a fisher and paykel single door dishwasher model dw918 td. The other day its door spring collapsed and the door had a free fall. The dishwasher operated fine. But we have accidentally opened the door and let it free fall under its weight a few times. Last night the dishwasher began its cycle and stopped after 10 minutes - no beep, no alarm, display was fine. it just stopped. I opned and closed door a few times. Pressing the start/stop button only resulted in a beep but no action. I let


... Fisher and Paykel Dishwashers

Kenmore elite dishwasher door broken


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore dishwasher My Kenmore dishwasher model 630.16302401 is not successfully completing wash cycle. When I hit "normal" and turn it on, water enters the d/w, and the sprayers (both top and bottom), spray water. Approx. 10 mins. later, the water is drained. At that point, it appears that water never again enters the d/w to complete the wash cycle. In fact, the soap in the dispenser does get released, and the door opens. However, the soap will just run down the inside of the door and pool on th


... Maytag Dishwashers

How to install a gasket on a kenmore dishwasher. I have a Kenmore dishwasher and have put the gasket around the door but there's extra pieces on both ends and can't figure out where to attach them on the underside of the door.


... Kenmore Dishwashers

Amana dishwasher door springs need to be replaced how do i put door springs back into dishwasher


... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1908 seconds