Having problems with your Kenmore Dishwashers ?

Need a gasket for a portable dishwasher attachment

\015 Need the washer (gasket) for the part of the dishwasher connection that goes around the faucet\015

Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Need a gasket for a portable dishwasher attachment


... Kenmore Dishwashers

Model 587784100 My 18inch Kenmore apartment-sized portable dishwasher leaks when running and needs a new main rubber gasket (where the door seals the washer), and a new collar of some sort of white hard plastic collar at the very bottom of the spinning washer arm (which I believe helps make it spin more freely and not "chatter"?) My question is: Is it possible foe a handy person to replace these parts (looks fairly easy), or should I get a proper Kenmore/Sears repairman to fix it?


If you think you can do it then do it. it is normally not any harder than it looks. now because i work there i would say call them :) but you can change those parts fairly easily ... Kenmore Dishwashers

I need the steps to change the hose assembly on my Whirlpool portable dishwasher. When I got it someone had cut the sink connections off so my son connected it to the water and drain with my washing machine which was in the kitchen. However, I have moved and want to use it as portable. I purchased the new hose assembly for the sink faucet, I just need instructions on how to take the dishwasher apart and connect the new hoses.....HELP PLEASE!


... Whirlpool 24 in. Portable Dishwasher Dishwasher

Portable Dishwasher I have a older model portable dishwasher. It works great and until it goes out I would like to keep it. I am wondering how or what I will need to make the dishwasher a non-portable. I get so tired of moving it across the kitchen floor. Is there anyway I can hook something up to my lines underneath the sink so it will stay where it is? it is only about 10 ft away from my sink but that it alot of moving around when it is full of dishes. Please help. [email protected]


I sent you and email with some instructions, Look to hear from you soon!! ... Kenmore 17252 Free-standing Dishwasher

I'm having my kitchen counter tops replaced with granite. I have a GE Model GSD700 dishwasher that is now attached to the existing counter top. The granite counter tops will not accept having a dishwasher attached. I need installation instructions for the dishwasher which do not include being attached to the counter top. [email protected]


You can attach a block of wood using silicone adhesive to hold it in place on the underside of the granite top. After the silicone has cured (usually 24 hrs) you can use the same mounting clips as before. Just be sure to use shorter screws than the ... Dishwashers

Dishwasher i need help either installing for troubleshooting my 18' portable frigidare dishwasher. when the dishwasher is turned opn and it starts to fill the water flows out of the bottom of the machine what is the problem and how dod i fix it is it the hoses ? it also hooks up to the sink it isnot a built in dishwasher so is the hose for the draining need to go in the sink or does it hook up somewhere under the sink?


I would put the dishwasher on its back so you can see underneath to check the fill and drain hose to make sure there not damaged in any way to cause it to leak. if it all looks good under there return it upright and remove the front lower kick panel ... Frigidaire 18 in. FDR252RB Built-in Dishwasher

We just bought this dishwasher. The instructions say it doesn't need to be anchored and it doesn't come with the clips you usually see for dishwashers that need to screwed into the frame (or have a place where such clips could be attached). That said, the dishwasher completely tilts forward when the top rack is loaded, so something is definitely not right. Has anyone had this problem and/or know how to resolve? Thanks.


... Maytag MDBH985AWW 24 in. Built-in Dishwasher

My portable dishwasher hose that attaches to the faucet is to short for where I want my portable dishwasher to sit. I would like for it to sit in one spot. I am not allowed to alter or cut holes in the side of cabinets, I am renting. Is there an extension for the hose to the faucet? If not, what can I do to make the hose longer? If I really have to I will cut the two hoses that comes from the dishwasher to the faucet, but I would rather have an extension first.


You should be able to find extension or replacement hoses that you can use to extend the existing hoses at a hardware store. If you need to join two hoses that have female connectors, adaptors with two male connections are available. ... Dishwashers

How to install a gasket on a kenmore dishwasher. I have a Kenmore dishwasher and have put the gasket around the door but there's extra pieces on both ends and can't figure out where to attach them on the underside of the door.


... Kenmore Dishwashers

I have a Kenmore Quietguard portable dishwasher which does its job excellently. My problem is that I can't seem to find a proper spigot attachment in a standard hardware store, like Rona, that hooks up to it satisfactorily, or at all. On the faucet I had before I had to wrap the joint tightly with a big dishcloth or it would squirt all over the place. I have a new faucet now, and so far the dishwasher's faucet attachment won't even stay on when the water's running. I'm wonder where I can get th


... Kenmore 17259 Free-standing Dishwasher

How do i connect a kenmore ultra wash II portable dishwasher to kitchen sink, the attachement on the hose attached to the dishwasher it to big around to fit my facuet


You can get an adapter from a local hardware store. I'd come equipped with make and model number and the screw on screen retainer piece from your faucet. ... Dishwashers

Need to convert portable dishwasher


... Dishwashers

Portable dishwasher does not attach properly to faucet sink


... Danby DDW1805W Designer Series Free-Standing Dishwasher

We need to replace the little rubber latch that keeps the dispenser door closed on our Kitchenaid dishwasher. Do we need to replace the whole detergent dispencing unit or just the latch. And if we do have to replace the whole thing, do you know how it attaches and have advice for that repair? Type is Kitchenaid KUDS01IJ


Check here ... KitchenAid Dishwashers

I am trying to clear the drain on my ge portable dishwasher. I have removed the 2 screws for the drain cover but my dishwasher has another part on top attached to the spray arm that is holding my cover on . I can not figure out how to remove this part. the model # is gsc5511pooww


... GE Dishwashers

The hose from my portable dishwasher won't stay on my faucet it slips off so I need an adapter for my faucet can't seem to locarte one the works for a kenmore portable diswasher model #665-1744990


... Kenmore Dishwashers

Leaking dishwasher my Frigidaire dishwasher which is a few years old, but with minimal use has a drip in the left hand outside corner. This happened when we first got and the maker sent us a replacement gasket for the front inside of the machine. Do you think that is what we need to get again


Hi,\012Yes. replace the gasket..\012\012Here is a tip that I wrote about dishwashers and them leaking.Leaking Dishwasherheatman101 ... Frigidaire FDB1502RGC Built-in Dishwasher

I have an old free standing Maytag portable dishwasher, model number WC504. I just need to know what the differences in the drying options are. What is the difference between Power Dry, Temp Boost, and Energy Saver? Also, If drying plastic or Tupperware in the dishwasher, Which setting should be used?


Power Dry uses a little more electricity when drying but does a good job.Temp Boost will raise the wash temperature to clean better, this uses very little extra energy and works well, it may add a little time to the cycle Ener ... Maytag 24 in. MDB8600AW Jetclean II Built-in Dishwasher

I recently purchased a Maytag portable dishwasher Model MDC4650AWW. There was no faucet adapter included with the washer. I need to know which parts I need and how to connect it. Thank you


... Dishwashers

I need to replace the large gasket in the front of my Whirlpool Gold dishwasher. I have the part W10082795. Is there a trick to it or do I just pull out the old gasket and wedge in the new one?


Take exact center of new gasket and start installing at the exact cent of top of door. very simple. ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

My Kenmore portable dishwasher quit working in the middle of the wash cycle. It has power going in, but no longer runs at all. I need a service manual or a troubleshooting guide. Is there a circuit breaker somewhere on it that needs to be reset? Charlie


This seems to be that the Anti Flood system has triggered. This device detects water leaks / spills to the bottom of the washer and automatically puts the washer in pump out mode and shuts off the water inlet. The device is made up of a pollystireene ... Dishwashers

I have a kenmore model 587.15193400 dishwasher and I need to replace the bottom door gasket. Do I need to take the door apart to get to it?


... Dishwashers

I need an installation/user guide for a Comenda C95Z commercial dishwasher. Electrician needs to know if it can run on single phase (it came with a 3 phase lead). There are hot and cold water hoses - plumber isn't sure what the cold is for as it doesnt have a connector attached. Is there anywhere I can download the manual?


... Dishwashers

I just got an portable dishwasher Kenmore model number 5871748581 and I need to know what I all need to hook it up..


... Kenmore 17252 Free-standing Dishwasher

The upper spray arm on our dishwasher has become detached from the back of the machine, and there is no obvious means of reattaching it. Are there some clips perhaps that have snapped on the part which attaches to the back wall of the d/washer (part number PP-TD20 - it's a 4 by 1 1/2 inch long rectangular shape with rounded ends) or does this piece somehow need to be taken apart (how - i can't see how i might do this?) and the transparent 2nd layer underneath get attached first? Thanks, Sarah.


What exactly the brand / model of your unit.?Let me know.Thanks ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1724 seconds