Having problems with your Kenmore Dishwashers ?

We have an older model kenmore dishwasher. There are three panels with this dishwasher and we can't find our manuel to tell how to change the panels. Can you please help us by telling us what we have to do to change the panel on the door to another colour?


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

We have an older model kenmore dishwasher. There are three panels with this dishwasher and we can't find our manuel to tell how to change the panels. Can you please help us by telling us what we have to do to change the panel on the door to another colour?


... Kenmore Dishwashers

My whirlpool dishwasher type 280-2 detergent door will not open during wash cycle. Yes the compartment, springs and door are thoroughly clean. Will not open if I just close the door and remains empty. I'm wondering if perhaps I knocked off some random part that makes it open. So please tell me how darn thing opens and perhaps a pic of the parts so I could see if ones missing. Thank you for any help offered for this, its driving me nuts.


... Dishwashers

Inglis dishwasher the colour pannel on the door bulged and fell out. How can I put it back? We lost our user's manual that would describe how to change colour pannels and I am sure I could figure it out from there. could you explain the procedure or tell me where to find the user's manual on line?


Inglis dishwasher works well until it drains. It doesn't know enough to stop draining and begins to make a whining noise and will not stop. Like it doesn't know to go to the next stage. How do I fix this? ... Dishwashers

I need an installation manual for this product, I have changed my kitchen doors and can't connect the new door to the dishwasher, please help.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Please post back with the manufacturers name and model no# of\015\012your Dishwasher so that I assist yo ... Dishwashers

Hi, I have a Tecnik TKD/795 dishwasher (not sure which version - its the one with the three black rubber buttons on top). The problem is that the 'ready' button's led light is continuously on green 'on' so I can't change the program select. Also when I close the door to automatically start the cycle - nothing happens ! Please can you help ? Thanks Mr. Arwel Jones


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. This issue can be either due to a\015\012faulty door latch or door lock switch which is not engaging itself. An ... Tecnik 24 in. TKD795/3 Built-in Dishwasher

Put dishwasher on and 3 hours later went to unload. opened door to find END light had not come on and both 55 degree buttons were lit (I'm sure I only depressed middle 55 degree button button), 65 degree button was unlit. There was still some water in the bottom of the appliance. went through the procedure in the manual but cannot change the current state of the appliance i.e. the 2 lights on. HELP PLEASE! Model is TECNIK FD7811


... Tecnik Dishwashers

I have a SMEG DF612WE Type 10053 dish washer which as been standing idol for 12 months . It will allow you to change programs but when you press the play buttom for a few seconds it will not start . The dish washer was moved from one house to another but not tried before now . Please can you help


... Smeg Dishwashers

Our Bosch dishwasher is 6 mths old. The soap dispense door will not open during any of the different cycles. We have a repair person scheduled to look at it in 10 days. In the mean time... when do we put the soap in? Beginning? Middle of cycle? Please don't tell me I need to wash them by hand! Thanks for your help.


After the first rinse would be ok ... Dishwashers

Please help my wirlpool ikea diswasher was working well but suddenly it stopped!I have one of those DWF small ones and have the buttons on the inside top part of the door. when I press the start button nothing happens and when I close the door the alarm sound goes off!! can anyone help me please


Try dropping power to the unit for a minute and see if it will reset itself. if not, you have a logic board failure. that or a door switch. check the manual for an indication on the warning alarm.good luckmark ... Whirlpool GU2400XTP Built-in Dishwasher

I have a Whirlpool Energy Star dishwasher (no clue what the model is). Door will not latch. Inside of door says to press and hold ''Heated Dry'' 5 seconds to lock control and repeat to unlock. This is not helping. We rent and do not have a manual. Please help.


Happened to me today. After much head scratching I found that the screw attaching the unit to the underside of the kitchen counter had loosened and was preventing the door from closing all the way. I tightened the screw and was back in business. ... Dishwashers

KITCHEN AID STAINLESS DISHWASHER MODEL #kuds02frssWe just replaced both springs in the door and the latch mechanism and the soap dispenser that still does not work. Our door will not stay shut. MY HUSBAND NEEDS HELP.. PLEASE HELP. HE IS VERY GOOD AT REPAIRS AND IS STUMPED!!


Hi.Your husband must check wiring harness from electronic control to door lock solenoid.The solenoid should also be tested reading Ohms with a multimeter.Here parts and diagrams: ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Model KUDI02CRBS1 I used to be extremely happy with my KA dishwasher, but lately dishes are coming out milky and gritty, some dishes still semi dirty. After cycle is complete top inside of door is dirty and soap dispenser door open but some soap remains. Please advise to help me trouble shoot. Please, list from most obvious/simple to worst case etc. Thank you G


Hi\015\012If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it's kept in a dry environment. Also try replacing the powder with something like a gel or liquid. Next ... KitchenAid Dishwashers

I don't have a model number right now, but the front door on my Admiral dishwasher is leaking at the bottom. I have changed the gasket inside the door panel at the bottom but it still leaks. This is a rental property and the renters did a job on this dishwasher. I was wondering if they may have pulled another lower gasket off that I didn't know existed. Something like a windshield wiper. The seal I changed was a foam strip 3 x 22 approx. Thanks for your time, Joan


It may not be the door that is leaking if this is an older admiral or whirlpool dishwasher the lever that holds the soap door closed has a little rubber seal that after time will let water in during the wash cycle it the runs down the inside of the d ... Admiral Dishwashers

I have a Bosch SMU2046Uc/14 about 15 years old. Sometimes it works, sometimes not, for the last couple of months. Now it has stopped working completely as if no power. Checked the breaker. Another problem - one of our kids just today jammed the door lock on it and we cannot get the door to latch at all. Can you help with any one of these problems? How do you fix or reset the door latch??? What else can we check to troubleshoot the dishwasher? Thanks!


... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

CDA CW497 Integrated Dishwasher. Please advise how to connect the door as I do not have the installation manual and have changed all my kitchen doors, but now cannot get the door on the dishwasher.


Please note the link to download this manual has now changed to http://www.cda.eu/Downloads/Manual/2176/cw497_im.pdf ... Dishwashers

Door interlock appears faulty on my whirlpool awm 321 . It wont allow program start when door closes . Needs a lot of coaxing , banging with palm of hand , knee etc .Door itself appears fine , catch looks ok , finishes and runs ok once we finaly get it started .Hve tried pressing the interlock slider in with a pencil , but cannot succeed in pushing the contacts into place and starting the program . HELP PLEASE


Only solution is to replace the interlock - it is just held in by 2 screws ... Dishwashers

Prima lpr601 problem- filled dishwasher up sa normal set the wash pressed button on far right (dont know what it is but needs to be done), closed door and loud raattling so i opened door to make sure all spray arms were clear which they were, closed the door , again the rattling . now the green light has gone out on far right and cant get it back on so program wont start at all. Any advice?? please help


... Dishwashers

GE Dishwasher - front door assembly - GSD5420G00WW - Took the front door apart to check the wiring as d/w was acting erractically (not draining fully, not obeying pushbutton commands every time). Everything seem OK, but now not sure how the detergent latch lever and the sequence switch lever fit together to reassemble the door. Help, please. Rick


... GE Dishwashers

I have Chef DU6550P dishwasher. At the end of the washing cycle there is a small water leak from bottom left corner of the dishwasher door. I have not noticed any damage or wear and tear to door seal during visual inspection of door. Please help me to identify the problem. Thank you Gene


... Magic Chef Dishwashers

Have an E2 code on my Samsung washer and can't open the door... have tried to go through the rince again [8 minutes] but that didn't seem to help.. and so, HELP please


If there is still water in the washer then you can use awet dry shop vac and attach it to the end of the drain hose to remove the water. once the water is gone then you will be able to open the door.after that then you will need to check the drain ho ... Samsung Dishwashers

I have a Philco dishwasher Svelta DWN17 which works well but has lost its spring or counterweight for the door. The door now drops open when not locked for washing. I am having difficulty finding a servicing firm for this machine and would try to fix it myself if I could find a part and get some details on how to go about it. Can you help, please? Alan Wright


... Dishwashers

I have a GE quietpower 3 and I cant get the door to shut. There is a green light on that says clean. There are no dishes or anything in the way of the door. I have no idea what is going on and I really do not want to phone my landlord. Please help!


The door latch is probably in the shut position. you need to move it to the open postion. ... Dishwashers

We have a matsui mf160 dishwasher. The door wont close properly as the spring that closes the door in the centre of it has snapped off please help. Can we get a part to mend it?


... Neff 24 in. S5555X0GB Built-in Dishwasher

I have a ge nautilus dishwasher and i took the door panel off. Problem is the spring popped off the timer and I do not know how to put it back so that the cup closes that releases the detergent. My wife is upset and I need some type of help. A diagram anything I am searching the net but to no avail. Please help. Derrick


Hello Derrick,\015\012I learned a long time ago that a picture is worth a thousand words and that before attempting any repair, I typically take several digital shots as a backup and in case I forget where things went. I know that won't help yo ... Dishwashers

We have a bosch integrated dishwasher with a broken handle. We can't get the cover off to replace it! There are no visible screws on door front and I am unsure about unscrewing the metal panel door in case I damage further. Please help!


I am not sure how to fix your broken handle issue but if you are ever looking to change the look of your appliances like I was then you should check out www.applianceart.com. ... Neff 24 in. S5443X2 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1322 seconds