Having problems with your Kenmore Dishwashers ?

I have a Kenmore Ultra Wash Dishwasher model 665.16379301. The spinner from the top of the dishwasher has come off. I have a replacement part but need to know what is required to replace it. Do I need to remove the feed tube assembly in order to replace it?


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kenmore Ultra Wash Dishwasher model 665.16379301. The spinner from the top of the dishwasher has come off. I have a replacement part but need to know what is required to replace it. Do I need to remove the feed tube assembly in order to replace it?


... Kenmore Dishwashers

I have a Danby dishwasher model 1802W-1. I ordered a new upper rack because the wheel broke. The old basket was accidentally thrown out before I could remove the upper spray assembly. Is there a kit replace? What parts would I need to replace?


... Dishwashers

How do I remove the latch assembly to bosch dishwasher model she44co5uc/22, in order to replace it?


... Bosch 24 in. SHE44C05UC Stainless Steel Built-in Dishwasher

Kenmore Dishwasher Model #110703412 leaks, likely around the motor shaft. Are there motor shafts seals and how are they replaced? Does the motor assembly remove through the tub or does it require being removed from the bottom? Do you have to remove the dishwasher from the cabinet to do this job?


... Kenmore Dishwashers

I have a Necht dishwasher. The dishwasher door does not close therefore I can not get it to operate. Someone came to have a look at it and they said that it needs a replacement for the door latch. The problem is I do not know where I can find this replacement for this brand ( Necht). Can you tell me where I can burchase or order it from? a website or a shop.


Depends where you are located. Try google .com and search for Necht. ... Dishwashers

Need to replace the latch assembly on Maytag dishwasher model # MDB5600AWW. How do I gain access to the area where I need to replace the part? I removed the 5 screws at the top, but can't seem to get the upper front panel off. I'm afraid of pulling on it to hard.


Remove all the screws on the inner door panel and lift it up it will be easyer ... Dishwashers

I need to replace my dishwasher. I need to know size specs to order one that will fit. My measurements are a little dif. Then what is offered. Can anyone help??? Ge model no. Gsd4030y70ww


... GE Dishwashers

I bought a Faucet Coupler assembly, but I need to know how to install it. For instance, how do I remove the required covers to remove the old one and install the new? Thank you, Louis L Likes


MAy I get the make and model # to help you more. Also are you trying to replace the supply line to the dishwasher. If not can you please explain your problem some more. ... Dishwashers

My dishwasher Fisher & Paykel dishwasher Mod DD603. Its trim assembly (pn 526744) has broken and I order the part. I want to know how to replace the part. Please help me with step by step. Thank you


Www.stokes-aus.com.au/.../DISHWASHERS/599084%20Dishdrawer-Version%203%20%20eg%20%20DD603%20etc.pdf\015\012\015\012\015\012\015\012There is an exploded diagram?\015\012\015\ ... Dishwashers

Whirlpool DU920PWKB0 Dishwasher We may be in need of a lower dishrack assembly. I noted that this part does not come with the pressure cone. How can one remove the pressure cone from the old rack to insert in the new? I don't want to break it. (Even if I ordered a new rack and a new cone, I'd still have to insert it -- a round part in a square hole.)


... Whirlpool Dishwashers

I'm trying to take apart a kitchenaid dishwasher door model KUDP01ILWH0 to replace the dispenser assembly. I removed all the torx screws holding the outer and inner door panels together, but they don't want to separate. Anyone know what the trick is here? Thanks


You can get assembly diagrams of your system. Go to;\015\012http://www.appliancepartspros.com/partsearch/model.aspx?model_id=503 ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

The cover of the detergent dispenser does not latch properly and will flip open. The dishwasher is 6 years old and I think we need to replace the dispenser assembly but don't know how to take it off the door and put it back. The model number is GU1500XTKB0 Thank you for your help.


I've posted this before. The latch just needs a good cleaning. In the past, something placed in the washer kept the door from opening properly, which caused detergent to dry under the latch. This has happen several times until I figured it out. Don't ... Whirlpool 24 in. GU1500XTLS Stainless Steel Built-in Dishwasher

Whirlpool DU980QPDQ3: As per FixYa solution, I was successful in removing the inner panel of my dishwasher door in order to clean it. Since reinstalling the inner door panel, including the cover and drawbar for the detergent dispenser latch, the dispenser door will not open during the wash cycle. I have checked everything and cannot figure out what is wrong. I have only been able to locate disassembly instructions, but not the detailed assembly instructions that I need to get the dispenser do


Here are a few videos that may help\015\012Click on the link http://www.youtube.com/watch?v=MDideDjjuEU\015\012\015\012Click on the link ... Dishwashers

I have a Kenmore Dishwasher Model #665.168790000 and the water fills just fine and empties fine when cancelling cycle but when pressing any wash cycle the pump/motor just makes a loud humming noise and does nothing. I took apoart the lower assemblies to clean everything out but the problem hasn't gone away. Do I need to replace the motor or the whole motor assembly (also contains impeller kit)??? Also, I don't think I need to replace the whole sump & motor assembly do I???


... Kenmore Dishwashers

How do I replace myself the detergent/rince aid assembly on a Maytag Jetclean dishwasher EQ plus model #MDB9150WB? I only need to replace the door, but I don't see a part for that, just the entire assembly. Please advise how to replace myself the entire assembly or can I just purchase a door from the detergent/rince assembly? Thanks, Carol


Carol,\015\012\015\012This is a simple repair. Remove the screws around the outer door edge and separate the door. The dispenser is clipped into position with several screws. Remove the screws and push the dispenser through the door.You can pur ... Dishwashers

Dishwasher 66513752K601 keeps blowing the thermal fuse. (Bi-Metal W10258275). I have replace the Thermal fuse several times. After i replace the fuse for some reason after a few months or less it will blow it out again. I have also replace the front panel assembly after it stopped working correctly. I would like to know how to test the dishwasher to find out the root cause of the fuse issue. I don't want to be replacing the fuse every time and don't have the $$ to buy a new dishwasher. Everythin


... Dishwashers

We need to replace the locking ring in the bottom of our Asko 1716 dishwasher.(It's cracked) I can only find one kind of replacement ring for that,but it looks like the right size. I need to know if Asko uses one ring for more than one model of dishwasher?It's a 5" locking ring for the bottom well of the tub. Thanks for your help!


Only 1 size ... Asko D1716 Built-in Dishwasher

I have a Hotpoint HDA3500N dishwasher and need to replace the base spray arm. I can not get it removed to put in the ge replacement spray arm model #WD22X10055. I'm afraid I'll break my dishwasher trying to remove the base spray arm


... GE Hotpoint HDA3500N Dishwasher

I have a Hotpoint HDA3500N dishwasher and need to replace the base spray arm. I can not get it removed to put in the GE replacement spray arm model #WD22X10055. I'm afraid I'll break my dishwasher trying to remove the base spray arm


... GE Hotpoint HDA3500N Dishwasher

Bosch dishwasher (SXH55MO6UC/46): The power comes on and runs normal, but no water is coming into the unit. I was told that it was a water inlet valve that needs to be replaced (part #263833). I need to know if this is what needs to be replaced and if so, is this something that I can do or do I need an expert repair service to do it? If it is something that I can do, I need instructions. I am handy, but this is something that I have not done before, Thank you, Craig Covey


Hi Craig,Yes it may be the fill valve...but first take off the pipe or hose and check the screen just inside the fill valve...some do not have it but most do...also check that water comes out of the hose or pipe at the valve....THEN ... Bosch Integra® 500 SHX55M05UC Built-in Dishwasher

We recieved a dishwasher that had tons of lime and scale. well i remove that mostly by hand by taking the bottom part and disassemblying it and soaking it in CLR and slowly removing the calcium lime and whatever else there was. but i am kind of a thorough person and the bar =on the back of the dish wash needs to be removed and the back of it cleaned and probably soaked also if not replaced but i will just clean it for right now if i can. HOW do you remove it? I need a step by step on how to remo


Instead of going through all that effort, and still not being able to get to everything, just use a product called "Dishwasher Magic". It is a dishwasher cleaner and disinfectant, and cleans limescale and rust out of the dishwasher by just running i ... Maytag 24 in. MDB4600A Built-in Dishwasher

Hello,I hope you can answer the question below for me. My dishwasher is a Hotpoint model BFI680 - integrated. I want to replace the old interlocking assembly with a new one as the spring has broken and I can not close the dishwasher door. I have trouble removing the old interlocking assembly though. I can not see any screws that keep it into place as with other models. Instead, it looks like that it is "clipped" to the dishwasher door via the two inner side round holes at the bottom. Tried to re


... Hotpoint 23 in. BFI68 Built-in Dishwasher

Need help removing my GE Potscrubber 1130 dishwasher. This is an old unit, I have removed the front base board and disconnected the wiring but need to know how to get to the water line to disconnect that. Do I need to do it before I pull the unit out?


... GE Dishwashers

Leaking This is a problem that I have when the dishwasher is in drying mode. I will find a 5X5 and sometimes smaller, size water spot under the dishwasher after the dishwasher has stopped. I was told it was the vent were the steam comes out and I had that replaced. It still leaks, then they told me to replace the rubber around the door, still leaks now they order a whole new plastic interior door. Please if you have any ideas what could be causing the problem, please let me know. Thank you


\015\012open the bottom panel 2-4 screw\015\012take a flashlight and turn the machine on\015\012see where it come from\015\012if you need take the unit out a bit f ... Jenn-Air JDB4000AWS Stainless Steel Dishwasher

We need to replace the little rubber latch that keeps the dispenser door closed on our Kitchenaid dishwasher. Do we need to replace the whole detergent dispencing unit or just the latch. And if we do have to replace the whole thing, do you know how it attaches and have advice for that repair? Type is Kitchenaid KUDS01IJ


Check here ... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2467 seconds