Having problems with your Kenmore Dishwashers ?

In my Kenmore elite manual {Dishwasher} Model 665-13109k901 it says to clean the ultra wash filter once a month. Where is it located in the dishwasher the manual doesn't show it. Please help me with an answer. My dishwasher is 6 months old.


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

In my Kenmore elite manual {Dishwasher} Model 665-13109k901 it says to clean the ultra wash filter once a month. Where is it located in the dishwasher the manual doesn't show it. Please help me with an answer. My dishwasher is 6 months old.


... Kenmore Dishwashers

I have a Kenmore Elite Dishwasher about 7 years old. The Model # is 665-16462300. It works beautifully, except that about every 2 months the spray flow intensity ( and the cleanliness of the dishes) drops significantly. The cause is the metal screen located just upstream from the sump is clogged with food particles. I have taken apart the dishwasher several times to remove, clean and replace the screen. This fix works for about 2 months, then another cleaning is required, even though we h


... Kenmore Dishwashers

I have a Kenmore Elite Dishwasher about 7... Problem with the Kenmore Dishwashers I have a Kenmore Elite Dishwasher about 7 years old. The Model # is 665-16462300. It works beautifully, except that about every 2 months the spray flow intensity ( and the cleanliness of the dishes) drops significantly. The cause is the metal screen located just upstream from the sump is clogged with food particles. I have taken apart the dishwasher several times to remove, clean and replace the screen. This fix wo


Check the inlet hoses; if the catch screens have sediment build up, that will reduce the pressure of the rinse water. Also, look for missing plugs on the rinse arms... ... Kenmore 24 in. 16462 / 16464 / 16469 Built-in Dishwasher

Kenmore Elite - 9 Year old Dishwasher - A circuit blew and the dishwasher stopped in mid-cycle and did not drain.... I reset the circuit breaker and "manually" took the water out of the dishwasher. When I push buttons to restart the "95" shows up for the normal cycle. However, when I push start the "95" becomes a "--". Suggestions???


... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

My dishwasher adp 7570 is only four months old, but it do not clean the dishes properly. I tried to rinse it with sun rinse for dishwashers, but now it wont work. The start lamp blinks, and the display shows F2. The salt lamp lihts red.


... Dishwashers

Model FDB4315LFC2 Serial TH80658596 It is only 20 months old but Does not load with water. I have checked water line into white valve and water is flowing, but it does not come into the dishwasher. If I manually put water in the bottom of the dishwasher it works fine through the cycle until it is time to pump in more water. There is a sound but no water comes through the valve.


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. As you have already checked the water line for clogs/obstructions and the water is flowing but wont fill ... Frigidaire Dishwashers

Sg14345au manual Hi Guys. My bosch dishwasher GPRS thru the cycle (slowly) showing two hours instead of 90 min but has now stopped heating the water. How can I isolate whether its element or a solder joint somewhere? Anyone got a manual for this model. Now about ten years old. Cheers. Rick


... Bosch Dishwashers

Our dish wash is not all the time showing several alarms and not performing well. water not hot enough, some times it locks showing a spaner wrench with P1 blinking. it does not rinse very well. It is only 6 months old. We do not have any manual for troubleshooting. Note. All of our kitchem equipment in the platform is hobart. please wating for your assistance.


... Hobart AM15T Dishwasher

Leaking dishwasher leaks intermittently. I removed the side panels and there is no sign of water in the base of machine. Door seal seams to be intact. What else can I check. Seal that needs replacing? Machine is 18 months old. seams to leak on the right side of the machine. Please advise. many thanks. My dishwasher showed the error code either OE or E1, I think it was more OE. I stuck my hand in the filter in the bottom of the machine and then it was okay but the next time it was used it leake


What sort of soap powder do you use\015\012some soap powders foam a lot in machine causing dishwasher to leak through seals\015\012also check that the machine is square that is the door is closing parallel with cabinet\015\012do no ... Dishwashers

Bosch SHU992SUC Dishwasher does not drain. It's not clogged in the external hose, the filters are not dirty. I moved the Dishwasher outside and ran it with the input attached to the garden hose and the output drain hose laying on the ground so there is absolutely no chance of restriction due to the way it's plumbed in. This model does not even show up on Bosch web site. I guess I have to start taking apart the machine blind with no service manual. Ideas? It's less than 10 years old I think. M


PUT THE MACHINE IN DRAIN MODE IF YOU DONT HEAR A HUMMING NOISE THEN THE DRAIN PUMP IS BAD. CHANGE YOUR DRAIN PUMP. ... Bosch SHU9925UC Built-in Dishwasher

My Maytag NDB9601 will not start any cycle. You can select the cycle and the display will show the time, but the start and delay buttons, located on the front, not the top with the cycle buttons, will not activate. This leads to the dishwasher not working at all. It worked in the morning, but not in the evening. Dishwasher is 1 year old.


Sounds like a possible door switch problem. \015\012\015\012If you take that area of the door apart, check the ribbon cable for keypad. You can clean the connector with a pencil eraser. ... Dishwashers

Samsung DMR57 dishwasher - Food grit and grime is now being left on the dishes in the lower rack, especially where they touch, after washing. The unit is 1 1/2 years old. The problem seems to be increasing over the past few months. I've tried all the manual's recommended procedures, to no avail. It would appear that either the water is not splashing up enough OR the grit is not being flushed out sufficiently. The manual states (inside front page) that "This product keeps food waste internal


Make sure that your unit is draining completely, if not then the sump needs to be serviced and cleaned out professionally. Make sure all your wash arms are clear, pull them off and check for stuck toothpicks, food debris etc. Next make sure that they ... Samsung DMR57LFS Stainless Steel Builtin Dishwasher

I have a six month old Smeg, integrated dishwasher, model D1612CT which has been working fine until recently. The pots are not clean. The cups and mugs have tea "rings" around them and the glassware is covered in a "milky" film, which comes off immediately if rinsed under the tap. I stack the dishwasher as recommended in the manual. I use loose powder rather that tablets, salt and rinse aid. Can you please sdvise me?


... Smeg Dishwashers

Where can I get the instruction manual for a Bosch Classixx Dishwasher SGS53C12UK? I have bought a second hand dishwasher that has only been used for 6 months. The programme works fine but when I go to use it again - check water shows on the display. I have to tilt the machine back as water is stored at the base of the machine, surely this is not normal? It there a simple solution to this or alot of cost involved with a new part? Any help would be much appreciated. Thank you.


... Bosch Dishwashers

I have an older (appx 20 yrs old)GE model 2200 dishwasher and recently started getting a C5 error. I understand the water input valve may be plugged. I don't have the owners manual. Where can I get one to locate the valve and strainer so I can trouble shoot this problem


Go to marcone.com, enter your model # and it will give you a full breakdown of the unit ... GE Nautilus 24" Built-in Dishwasher

F&P DD603i Greetings! My mother-in-law went to use her 18-month old Fisher&Paykel DD603 bottom drawer today (Thanksgiving) but it started beeping and showed an error with the motor. From the messages here, it looks like you may have a service manual for this unit? If you do, would you be kind enough to forward it to me also? My mom-in-law would greatly appreciate it, and I could probably get an extra slice of pumpkin pie!! Thanks, Craig [email protected]


Service manuals can be found at http://www.fisherpaykelparts.net ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My Miele dishwasher is about 16 months old. Initially it was awesome. Now it doesn't get anything truly clean on any rack. Every item has scum and traces of food or drink left on it. I've cleaned the filter and the no-return valve, and refilled the salt (yes, I used the right one) and rinse aid. The manual has no other instructions to remedy dirty dishes. The water is hot, and the machine seems to be running just fine. Where should I look for a problem?


The other possible problem is that the spray arms have small bits of food (sesame seeds are nasty!) stuck in the holes. Take the arms off and flush them out. You might need to poke out seeds that are stuck in the holes. ... Miele G880 Dishwasher

I have a 13 month old Bosch SHE58c dishwasher. The pump runs constantly and will not refill the tank. There are no error codes thrown on the control panel, but not sure there are error codes for this model - the manual doesn't mention any. So I have removed the side panel and can see the bottom pan is bone dry and I made sure the overflow drain switch was not bound and operates freely. Is there some type of reset button or other task I can perform to continue troubleshooting this problem? Repair


I have exactly the same problem. Turn on the machine and it just pumps and pumps, door controls do nothing. According to the technician who came and looked at it the problem is a bad control board. He ordered the part and we are waiting on it. ... Bosch Evolution 800 SHE58C05UC Stainless Steel Built-in Dishwasher

Kenwood KDW12ST3A Kenwood Dishwasher 18 months old intermittently shows E1 Thank you in advance


E1 indicated long filling time. Perhaps the inlet filter has clogged. Check the inlet pipe and tap(faucet in usa). ... Kenmore 15762 Dishwasher

Dishwasher E-NR SHV55MO3GB/79 only 7 months old lost the manual i have a picture of a tap on the display panel and a little bit of water in the bottom it wont do anything please help.


Hi, it sounds like there is no watewr supply to the machine. Try turning the valve closed, and then opening it again. If that doesn't work, turn off the water and disconnect the supply hose. Then, with a bucket handy, turn the water back on slightly ... Bosch 24 in. SHU43 Built-in Dishwasher

My cda dishwasher cw448 is 18 months old, and has recently begun to stop before the end of the cycle. When I open the machine, 3 lights flash, (one of them the rinse button), and the machine bleeps repeatedly. Why doesn't the cycle complete? I've checked the filters, the spray arms, all the dispensers, and manual doesn't give any answer. This doesn't happen all the time, but is occuring more often now.


... Dishwashers

Whirlpool Dishwasher Quite Partner II, 6 years old, Manual shows Models DU620, DU943, DU950, DU951, DU 960 and DUL200. Burning smell, clicking sound, Wash light blinks. Machine full of water.


... Whirlpool Dishwashers

We have a Maytag "Dependably Quiet" Dishwasher approx. 17 years old. The door doesn't close properly (after I mistakenly lifted and pulled on it at the same time to pull the machine out slightly further). It seems to have dislodged at the bottom somewhat and I don't have any repair manuals that show how it is secured. Both of the springs and plastic hook mechanisms are in place for either side, however, it has dropped slightly down on the left side and binds on the bottom access panel. Any h


It would be helpful if you provided the model number of your dishwasher.\015\012\015\012See below links to service manuals for a few models of Maytag dishwasher, not sure if any of these is yours. I believe the last one might be the Quiet ... Dishwashers

My one month old dishwasher keeps flashing the red light that indicates inlet/drain problems. I have tried what they suggest in the manual and I have rung miele and was told to reset the machine, but I am about to pull it out and leave it on the side of the road. Please help!!!


You have not mentioned Model of mechine. by the way,\015\012you can visit following website which helps you to find out exact problem.\015\012 ... Dishwashers

I have a bosch dishwasher classixx its less than a year old, the 'check water' light comes on and it doesn't complete the cycle. Water is left in the bottom unable to drain away. I have checked pipes as best i could, but couldn't locate filters or remove hose from m/c. unfortunately i have no instruction manual.. help please..


If its less than a year old why dont you contact the manufacturers service team it will still be under guarantee as the bosch guarantee is 24 months you can dowload a copy of the instruction maual free of charge from the bosch or bsh home appli ... Bosch 24 in. SRS43C12 Classixx Slim-Line Free-standing Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2487 seconds