Having problems with your Kenmore Dishwashers ?

My Kenmore dishwasher Model 587.16259400does not wash. It fills with water and after a normal wash period of time it pumps the water out, but during the wash and rinse it does nothing. Question: what is the likely problem and how costly it may be to fix? Thank you. Peter


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

My Kenmore dishwasher Model 587.16259400does not wash. It fills with water and after a normal wash period of time it pumps the water out, but during the wash and rinse it does nothing. Question: what is the likely problem and how costly it may be to fix? Thank you. Peter


... Kenmore Dishwashers

GE TRITON dish washer. Utensils are stained after wash. I tried all that suggested solutions like cleaning with white vinegar, make sure hot water flows before it starts. I donot think we have hard water problem and also tried Jet dry rinsing. Nothing is working still i see utensils soap stains and not completely rinsed. I am desperately looking for an answer. I am thinking of is there a way i can test whether the middle tower is really opening up to spray water or not. It might be something els


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Maytag Dishwasher

Dishwasher is not cleaning well, dirty film all over everything, like its not rinsing. In rinse cycle only, some water comes out of lower left port inside but nothing else. Hear a low buzz underneath unit like a motor or pump is energized but no water getting to the top.During normal wash cycle, buzz from underneath seems to cycle on and off, say every minute or so like its cycling on an overload. Do I have a bad pump and if so how do I get to it?


Hi. This may well be a pump issue, or an obstructed hose assembly, as well. Your symptoms are indicating that the impeller may be damaged. In order to pull the necessary schematics, I will need the entire model number. This ID tag will allow me to pu ... KitchenAid Architect? II S SERIES KUDS03FT Stainless Steel Built-in Dishwasher

Hello, I had a problem with my Bosch dishwasher not washing properly. I have fixed burnt out wires, replaced the water inlet valve, AND tested with a new control module. Nothing is helping. When I start the cycle, it completes the initial drain and water does flow into the unit for about a minute, maybe a minute and a half. I can hear the clicking of cycle changes but it is not washing. Eventually it will drain the inch or so of water in the bottom, but it never washes. Any help???


Hi,\015\012\015\012Welcome to Fixya.\015\012\015\012Can you hear the wash motor humming ? I`ve got a "pdf" I can send you regarding this if you want to contact me at ... Bosch SHU9925UC Built-in Dishwasher

DWI612C wash cycle runs on and on and on. Believing to be a problem with water heating I tried putting a couple large pan fulls of boiling water into machine during wash cycle and this did move it on from wash to rinse. How do I replace the heating element I cant see it it is not in the dish washing compartment? I dont want to call out a repair agent as one can probably buy a new machine for what that will cost. Thank you.


... Smeg 24 in. DWI612 Built-in Dishwasher

Our Miele G975SC dishwasher has developed a problem - it starts a wash or rinse cycle as normal - it pumps out, then fills with new water and starts washing as expected. Then it just carries on circulating the water and heating the water. It ran like this for at least 2 hours before we interrupted it by switching it off


... Miele Dishwashers

I have an Ultra Wash II, 665.1675590 dishwasher that works like a charm, my only problem is that when I put a rinse agent in the rinse dispenser, the minute I close the door it all runs out. I can fill it one day and the next it's empty. How can I fix this problem.


\0121 .Cut back on the amount of detergent used during the wash cycle. Sometimes this alone will solve your problem.\012\011\011\011\011\011\011\011\011\012\011\011\011\011\011\011\011\011\012\011\011\011\011\011\011\011\012\011 ... Kenmore Dishwashers

My Defy Dishmaid Silent makes a loud knocking noise when i start the wash cycle, it fills with water but dose not wash.When i start the wash cycle it sounds like it is washing with the added knocking noise but at the end of the cycle the salt has been released but nothing has been washed.A few weeks ago it would run the rinse cycle but now it will not wash on any of the cycles.Please advise.


... Dishwashers

I have a GE Triton XL dishwasher that is not spraying water onto the dishes. I just reset the power, and that didn't help. Putting it on the rinse only or wash cycle fills the bottom with water, but it sounds like a trickle vs. the spray. The heating element comes on and the soap door opens, but there's not spraying. I made sure there was nothing clogging the water line or other parts. What do you think is wrong?


... GE Tritonr XL GSD6260JCC Dishwasher

The water is pumped out after the rinse cycle then it continues to run and make an unusual noise but nothing happens. The noise is almost a grinding sound. There is also a smell like some part may be hot or the wiring may be hot. I can reset the dishwasher and re-run the cycle up until that same point and it does the same thing again. I have had a repairman out twice in the last six months. The first time he could find nothing wrong because the problem was intermittent and he couldn't see anythi


Timer \015\012\015\012or\015\012\015\012 ... Bosch Dishwashers

FDW60 dishwasher Hi My dishwasher is about 15 months old and the problem I have is that it seems to stay on pump and the Ecco45 light is flashing.  A repair company looked at the machine and said that the motor looked like it was leaking and water was getting in the bottom setting off the micro-switch.  He contacted Hotpoint who fitted a new motor today at a cost of £89.85.  Went to use dishwasher tonight and we still have the same problem.  The dishwasher started the washing programme for about


I've just (as of 10 minutes ago) had the same problem. I followed the advice given elsewhere in this forum and removed the bottom cover - water running out so needed a big towel to mop it up. I stood the machine upright and restarted it - no problem! ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

I have the Quiet Partner II, DU1100XTPB7, and have already replaced the electrical ciruit board but having the same problem. When I hit any wash cycle button, the soak/scour & heated dry buttons light up, but will not "start." The "rinse only" button does nothing, but if I hit the "delay" button, then the soak/scour, cancel, and also the status buttons, washing & drying, all night up at once. The only button that seems to be working is the "cancel/drain." Although there's no water in the mac


... Whirlpool 24 in. DU1100XTP Built-in Dishwasher

It went thru the whole cycle and when I opened it up - there was water still left in the bottom - hit the cancel/drain button and nothing happened. Unhooked the drain line to the drain pipe under the sink and no water came out. How do I find out if it is the pump ? If I take it out - what do I need to look for and what trouble shoot things do I need to know. I live about one hour from the nearest town - so I would like to find out the problem - before I call a repairman and maybe fix it myse


... Kenmore 24 in. 17462 / 17464 / 17469 Built-in Dishwasher

Hello I'm looking for advise on my 11 year old dishwasher. It's a kenmore ultra wash model # 15812. The problem is that when you push the wash button nothing happens. The drain funtion still works and all the lights on the front panel work but no water is flowimg into the washer. Do I try to fix this or just buy a new one?


Hello there:To be honest with you i would first try these solutions and see if they work cause a new machine would cost a lot of money.But if you can fix yours it would cost a lot less so plese try these solutions that i have provid ... Dishwashers

Diswasher TYP NBKH, SERVICE 8546 892 10010 Problem: For all programs except rinse and charge 1/2 for all programs. Pre-rinse and rinse for 50 Bio, 60 and 70 OK. Downloading water to wash causes multiple knocking (on the left side dishwashers) and simultaneous blinking light (relais?). Opening doors and adding water (different amounts - from 0.5 to 2 l) brings the normal work of dishwasher back. Rinse with cold water after washing OK. Final cleaning with hot water causes knocking again. After r


... Dishwashers

I have a Kenmore Dishwasher model # 587.1523. For some reason, after washing or rinsing cycles are complete, water is still in the bottom tub. My question is, besides the troubleshotting tips in my use and care guide, is there anything else i can look for or fix myself to help our dishwasher drain?


Good Evening,\015\012Have a Kenmore\\Quiet Standard Model#587.1523 900\015\012Dishes are not getting washed, cyles through , Believe the inside Top Nozzle is not getting any water up the tub to the top of the washer ?? Not sure hoo to fix ... Kenmore Dishwashers

My Kenmore 13739k dishwasher has started to leave dirty streaks after the wash cycle has completed. It seems like the dirty water is not draining properly. Any ideas for how to possibly fix this problem?


I solved the problem by adding Cystal powder sold by the Dishwasher detergents. Just a butmakes all the difference. ... Kenmore 24 in. 17032 Built-in Dishwasher

Dishwasher Model DE-56SS about 8 years old does not drain water between wash cycles or at the end of a wash.Nothing seems to be pluged in the drain hose or the drain. Is it the drain pump or some senor. What would be the cost of parts to fix this problem.


... AEG Dishwashers

Our Maytag model MDB4010AWW (8 1/2 years old) is leaving food stuck on the dishes and glasses on the top rack consistently. We've run several bottles of Dishwasher Magic through in the past few weeks which has only helped the problem a little. We posted this question to a similar forum a few weeks ago, and it was suggested that the wash pump might need replacement. What's the average life expectancy of a lowend dishwasher like ours? would it be more cost effective to replace it rather than to sp


It would cost you at least the 200.00 to have it replaced since the pump cost 150.00 and you would have labor added. It should last longer than it did if that's what's wrong with it. I would first observe to see if the upper spray arm is spinning and ... Dishwashers

DISHWASHER MODEL # KUDS03FTBL2 WORKED VERY WELL UNTIL TWO TO THREE DAYS AGO DISHWASHER NOW LEAVES MASSIVE FILM AND DEBRIS (LOOKS LIKE FINELY GROUND UP GRAVEL AND DIRT) OTHER DISHES AND SILVERWARE HEAVILY COVERED WITH WHITE FILM ALWAYS USE RINSE AGENT THIS MESS IS A FIRST HAD TO SCRUB ALL DISHES AND SILVERWARE WITH LIME AWAY INSIDE OF DISHWASHER COVERED WITH WHITE FILM AND SOME AREAS HAVE BROWN/WHITE DEBRIS???? IS THIS A DISHWASHER PROBLEM??? OR IS SOMETHING WRONG WITH WATER???? WASHING MACHINE


There is a product out called the dishwasher filtration system. it filters the water going into your dishwasher reducing the hrad minerals that leave that white residue. it is very affordable and works amazing. it goes right under the sink and is e ... Dishwashers

Model #MDB7130AWB Stops mid wash cycle at roughly 60-65 min left, water will not pump out. It sounds like it is about to pump out but doesn't and keeps doing this repeatedly. Using the 8 minute rinse cycle, it drains with no problem...any ideas?


... Maytag MDB7130 Dishwasher

Dirty dishes Dishes come out dirty. Soap not all disolved. You can tell they are washing but looks like the problem is in the rinse. SOunds normal. Took water valve ant it opens but not very much but not sure how much its suppose to open.


It would help to know the manufacturer and model number.\015\012\015\012Generally the most common problem when a dishwasher is not cleaning properly is:\015\012\015\0121. You switched to a different/cheaper detergent. Go buy a box of ... Dishwashers

This dishwasher (MAYTAG DWU6402AAE) is 12 years old, and recently started having a problem with the water. I'm not convinced it's spraying or even rinsing. The soap doesn't drain from the container. Dishes are not getting clean. I'd like to know if there's anything I can do to fix this before I call in a repairman. I'm very handy, and can follow instructions. Thanks. Mike


DWU700BAXSoap dispenser does not open during wash cycle. Kace removed ans cleaned pupp and filter also center nozzle which did have some paper specks but is now clean ... Dishwashers

Hi, we have a Electrolux DX302WB/03. It has worked ok for a few years. The problem now is when we turn it on it make a noise like it is starting then a small amount of water noise is heard then nothing. The timer clock runs untill the finish time but there is no wash.


Check the water inlet flow. Clean the strainer attached to the machine end of inlet hose.Add water from the front to the wash chamber 10 liters and run the m/c. It should become alright if any air lock inside water pump. ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher

Problems with Maytag 24 in. MDB8751AWS Stainless Steel Built-in Dishwasher. Will not clean dishes and leaves debris on everything! Had it serviced multiple times, changed soaps, tried additives, rinse agent, redirected exit water hose, Nothing works to fix it. It's a total lemon. Anyone else have experience with this unit?


... Maytag 24 in. MDB8751AWS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2074 seconds