Having problems with your Kenmore Dishwashers ?

Am a builder in Juneau, Alaska. New building codes require hammer arrestors on the pipe or appliance. We would like to know if the Kenmore Elite 1396 comes with built in hammer arrestors?


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Am a builder in Juneau, Alaska. New building codes require hammer arrestors on the pipe or appliance. We would like to know if the Kenmore Elite 1396 comes with built in hammer arrestors?


... Kenmore Dishwashers

My dishwasher so my dishwasher seemed to have quitworking during a cycle. like breaker triped or something. i checked the breaker and thats fine. it seams like its hard wired in though. Would that be right? and is there a fuse or something that could/would blow during a wash? I dont know what model it is or anything it was in the house when i got it. The dishwasher is built in and it seems decently old its a kenmore ultra wash and it has like 10 buttons for the differend cycles on the left and a


Sounds like the fuse on the control blew. you can replace the fuse for\015\012around $20 or you can cut and splice the wires for free. If that doesnt\015\012work then you may have a loose conection in your junction box under the\015\012dishwasher. ... Kenmore 24 in. 15932 Built-in Dishwasher

I have a Sears Kenmore Elite dishwasher Mod. # 665 - Ser.# FJ4805735 that intermittantly skips the wash cycle and pumps the hot water out just after filling. This unit was built in 2000 but the entire drive unit was replaced about 6 yrs. ago. If the problem lies in the electronics is it worth a do it yourself repair. I have an antique (1970'S) appliance repair background and electronics is not my forte. Money is tight and I would like to squeeeeeeeze another couple of years out of this appli


Hello,\015\012\015\012Welcome to FixYa.\015\012\015\012Would you be able to supply the complete model number. The Kenmore elite dishwashers where made by many different manufacturer's over the years, even within t ... Dishwashers

Kenmore 16359 this ca12. i saw your solution and thanks but i have a question before i change the console. the machine was working fine and we went on vacation and when we came back that is when the light was blinking. could that have caused it or does the consoles just go out? i would like to know so when i repair it i don't break it again. i looked at the possibile fixes prior found the console but not clear if the circuit board comes with because the circuit board in no longer availible. is i


'Membrane buttons' as they are so called, just go bad. The circuit board is not part of the switches. circuit board not available? Chances are this part has a substitution that is available. Many models of this type have consolidated to 1 or 2 standa ... Kenmore 24 in. 16539 Built-in Dishwasher

We have a Kenmore Elite dishwasher. Recently when opening the door we heard something snap and the door fell open all the way. It appears some type of counter balance broke free. We would like to know what parts are needed to be replaced and how to do it.


The door is holded by the hinges.the hinges are connected to the machine as well as to the door.\015\012if the hinges are bent or get cracked or loose then it will not hold the door.\015\012\015\012To repair the door hinge as ... Dishwashers

Kenmore dishwasher #665.16952000 Appliance will not respond to keys on electronic console. "Quick Rinse" button is flashing and no other buttons respond. I am assuming there is a reset sequence to push. Would like to know the sequence prior to paying for a repairperson to come out and charge me to do the same thing. Any info?


HiThanks for using FixYa. If the light flashes, pauses, and then repeats. When the dishwasher doesn't sense a water temperature increase, it stops working and locks the functions (light flashes, all bu ... Kenmore Dishwashers

I would like to know how old this dishwasher is? Mod HDA2000Z05WH and serial is SV826876Y. Would the wheels coming off bottom rack cause the motor to burn up causing washer to not work. There is a hard cap over something in the left corner on the bottom . Imwould like to know what is under that cap?


... Hotpoint 24 in. HDA2000Z Built-in Dishwasher

Hi I went to put my Bosch dishwasher on this morning only to find that it would not come on . there was water in the bottom of the dishwasher so i cleaned all the water out and cleaned all the filters but my dishwasher would still not work it was only when i went t o disconnect the dishwasher from the water supply did it come on Can you please let me know what problem i have with my dishwasher and is it likely to happen again


Hello,\015\012\015\012This video will help you fix your ouch dishwasher.\015\012\015\012 ... Bosch Dishwashers

Filter I have a free standing Kenmore Ultra wash and I would like some help on locating the filter and cleaning it out... you can come over if you like, otherwise you can just email the answer..., thanks, Hannah.


... Bosch 22 in. SKT5108 Free-standing Dishwasher

My kenmore elite model # 253.4448370 keeps beeping and won't stop. We try to press reset button because high temp and power failure lights are flashing but when we press reset button it doesn't seem like the button works..it doesn't reset like it use to...does anyone know how to make this beeping stop? It appears that the temps are right for both frig and feezer but beeping won't stop...HELP!!


... Kenmore Dishwashers

My Kenmore dishwasher is leaking water from the sump tabs QTY-3, I would like to know how to fix it and why it happened? If you can let me know what is the purpose of sump tabs? Thank You


... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

Kenmore quietguard 7 dishwasher...clean light flashing, dishwasher won't run repair guy a few weeks ago couldn't come, but told my husband to push a couple of the buttons on the control panel, and it worked for a while... repair guy coming back on Monday, but I''d like to know the buttons to push to reset it so I can use it till then


... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

My dishwasher (model #110763510) lets water go out from the door; I think the problem comes from the overfill protector because it is no more linked to the system: I can pull it out from the dishwasher. I would like to know if it easy to repair, easy access from under. If so, then I would order the piece and repair it myself. Thanks for your advice. Claude


Hello Claude. Yes. The best place to order parts is Sears Direct. Just go there, enter the model number and you get a great schematic showing every part, screw, etc. J. ... Kenmore Dishwashers

What does the thermal fuse look like on a Kenmore Elite dishwasher model number 665.16473300? I believe that is the problem. I have the control panel accessible but don't know what the fuse looks like for this model.


... Dishwashers

We built a home last August and our appliances are Whirlpool. We were very happy to know that we would be having Whirlpool applicances bacause we've always heard how great they are. But, we have not been pleased with our dishwasher. We called Metro Builders in Tulsa, Ok who provided the dishwasher for our house and asked several times to come check on it because it will not dry our dishes. They told us to just use Jet Dry and that would take care of it. I told them we use Jet Dry and make s


Hey guys, what is the model number of your dishwasher?The people/person that installed it could have wired it wrong.There is also a high limit (saftey device) that has tripped therefore not letting the element heat.As for the refrigerator it sounds l ... Whirlpool Dishwashers

Kenmore Elite Stainless Steel 24 inch tall Model 66577963K701. The heating element works for "heated dry" but not for "Hi Temperature" wash. It used to do so and when I opened the door a nice blast of steam would come out. My hot water tank is a great distance from the washer so we usually run the hot water tap in the sink for a bit until hot water comes... but the heating coil no longer kicks in on any of the cycles (Smart Wash / Normal Wash ). The high limit switch works and as I said, th


... Kenmore Dishwashers

Dishwasher I need to know the dimensions of a Siemans Dishwasher that I would like to buy sight unseen. The model number is SE657390G, and although it is built in at the moment, the owner said that it can also sit independantly. I need to know the dimensions to see if it will fit in our kitchen.


(H x W x D). ? 810-870 x 598 x 570 mm. ... Siemens 24 in. SE25A266 ExtraKlasse Free-standing Dishwasher

Kenmore Elite 630.1630 (made by Bosch) sounds like the pump is running but there is no water coming into the washer. The timer starts over like normal, but nothing else happens.


... Dishwashers

Kenmore Elite 17483 Dishwasher Caught Fire!


Had the exact same problem (Control panel burning up, sparking, and smoking during wash cycle) last night with our Kenmore Elite DW model 665.16293400 purchased Nov. 2004. I have reported it to the CPSC and www.kitchenaidfire.com and will be contact ... Kenmore 24 in. 17483 Built-in Dishwasher

My dishwasher Kenmore Elite mod 665.16283402 does not clean dishes seems like cycle is running, but everything comes dirty lower impeller moves but two upper ones does not change their position at all all the sprinklers are not plugged, inside no food pieces what possibly could be the problem thanks Greg


... Kenmore Dishwashers

AEG 50740 Like Mik, my water isn't getting heated. I have almost got it naked but can't get the front clips to come off so can't get right inside. If it is a water heater issue then I will replace it but I don't know if a new ecu would be practicable. Martin


Some machiens front bottom plastic is a "bump" off type (push sideways clip) Some machiens have electrical elements but some (later models) have inductive heater that fit in line with thewater pipe feeding to the main top washer arm. The electrical c ... AEG 24 in. Favorit 40850 Free-standing Dishwasher

Dish-washer My dishwasher is not draining all of the water out of the dishwasher after it washes. I got someone to look at the drain pipes and he cleaned out the stuff and they still will not drain all of the water. I would like to know what I could do to get all of the water out of the dishwasher so that the water will come out of the bottom of the machine. Wanda


The problem is most likely that the pump empeller had been damage by pieces from a broken dish or a small piece of siverware. The only way to fix this is to take the dishwasher apart and replace the empeller. If you choose to do this yourself, you sh ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

Kenmore 17369 When cycle starts... it sounds terrible (crackly sounding).... doesn't sound like the water is coming into the dishwasher. If I add water to the machine during a rinse cycle...it will wash and drain on its own.... Then I hit cancel. Please help.. I can't locate the owners manual.. Do you know where I can get one.. I understand that you can open the bottom up and see if there is anything lodged in the bottom of the dishwasher. Please help! thanks Cheryl


The problem is your water inlet valve. If you remove the panel at the bottom of the dishwasher you will see\015\012either a copper hard pipe, or a flexible steel hose leading into the\015\012water inlet valve.BE SURE TO CUT OF ... Kenmore 24 in. 17362 / 17364 / 17369 Built-in Dishwasher

Bosch Dishwasher ENR: SRV43MO3 GB/31 FD: 8704 I am about to buy a house which comes with the above dishwasher. I would like to know the age of dishwasher and if you can provide a general instruction for use sheet. Thank you


Hello. The machine is 3 years old.I cannot upload here the manual. To that direction(address) I it send? ... Bosch Dishwashers

How do I remove the top rack from our Kenmore built-in dishwasher? It looks like it has a plastic clip at the end of each rail that if not there would allow the rack to simply roll out. How do I take those clips out without breaking them and still be able to re-insert them?


Believe it or not you should be able to just push the clip ion the midle it will unsnap, when it it will basically unlock and allow you to slide it off, simply reverse the stepes to put it back on ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1661 seconds