Having problems with your Kenmore Dishwashers ?

Getting no power to Kenmore Quiet Guard 587-16163401

\015 I did a load of dishes, that finished. Re-loaded and nothing, no lights nothing. Reset the circuit breaker and still nothing.\015

Answers :

Of course, theck the power supply the dishwasher is plugged into. The next place to check is the junction box on the bottom of the dishwasher, behind the toe kick panel. If everything is okay there, then it is probably the thermal fuse located inside the door, attached to the dishwasher controller. If you need a new thermal fuse, you can check SearsPartsDirect.com, RepairClinic.com, EasyApplianceParts.com, or AppliancePartsPros.com.
Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kenmore Ultra Wash Quiet Guard Standard and it stopped working recently. It's definitely getting power, the "Heated Dry" button lights up when we press it. However, it won't start, even wen we use the 4-hour delay. Help?


... Kenmore 24 in. 17032 Built-in Dishwasher

Getting no power to Kenmore Quiet Guard 587-16163401


Of course, theck the power supply the dishwasher is plugged into. The next place to check is the junction box on the bottom of the dishwasher, behind the toe kick panel. If everything is okay there, then it is probably the thermal fuse located insi ... Kenmore Dishwashers

Help My Kenmore ultra wash quiet guard 1 dishwasher door will not open. There is power. All the cycles work.


Wow that could be a tough one there is no door lock on a dishwasher only a door latch what happens when you depress the door latch and can you send me a model number so i can pull up the blue prints and see if we can figure out a way to open it try p ... Kenmore 24 in. 15932 Built-in Dishwasher

No power there is no power going to the control panel . It will do nothing . the dishwasher is a kenmore quiet guard 3


I am having the same problem.....where is the fuse? ... Kenmore 24 in. 15932 Built-in Dishwasher

I Have a Kenmore Ultra wash Quiet Guard. I accidently poured finish liquid dish detergent into the rinse aid compartment and don't seem to be able to get it out of there. Put it through a few cycles and it still shows full. Can I get it out somehow. Thanks


... Kenmore 24 in. 15689 Built-in Dishwasher

Drain Clogged I have a Kenmore Quiet Guard Plus dish washer. The water will not drain from the unti. I believe the drian in the dish washer is pluged. I removed the 8 screws from the pump/strainer unit at the bottom of the unit I removed the top that the screws were holding donw, but can't figre out how to get to the drain to unplug it. The center metal unit is exposed and nut head is exposed. What do I do next to get to the drain hose to unplug it?


You might try pouring liquid plummer in the drain part and jet it set it shouold eat through whatever is in there ... Dishwashers

I have a kenmore dishwasher ultra wash quiet guard deluxe and broke a cup in the dishwasher. I want to make sure to get anything big that made it through the top filter. How do I get the bottom spray bar and filter off to check


... Dishwashers

Kenmore Ultra Wash Quiet Guard 4 Dishwasher model 665160344000 normal wash light keeps flashing. I have done all of the push this button and that button combinations I can find on the internet. I unplugged and repluged the 14 pin ribbon with power and without power --no joy. Looks like I need a new part - which part?


Hi\015\012\015\012Open the door. Within 3 seconds press the following sequence\015\012--Try pressing normal wash, heated dry, normal wash, heated dry, normal wash,\015\012heated dry three times within 6 seconds and then press cancel to re ... Dishwashers

I have a Kenmore Ultra wash Quiet guard 4 and when it gets done washing, it leaves tiny pieces of food on the dishes. I have used the dishwasher cleaners a few times and started rinsing my dishes till they are clean and they still come back.


This is typical of the two following problems:-1. You are using no salt or too little salt. Even if you use tablets/powders with a built-in salt action, in some areas the water supplied by the mains pipe still requires supplementary salt. ... Kenmore 24 in. 16032 Built-in Dishwasher

Kenmore ultra wash quiet guard dishwasher, the pots and pans and the normal wash button are blinking. The start and cancel and smart wash out tons have a faint light glowing. Thoughts? I tried the sequence of pressing heated dry, normal wash, heated dry, normal wash and that did nothing. I've flipped the breaker too. I was in process of taking it apart to clean filter, thinking that would help, but lost my manual and now I can't get that off to flea either:(. Sig


... Kenmore 24 in. 15689 Built-in Dishwasher

Kenmore Ultrawash Quiet Guard 4 stopped mid-cycle. No power to controls and water did not drain. What can we do?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks\015\012for using FixYa. Dishwasher not draining properly or not draining at all issues\015\012can arise due to different reasons ... Kenmore Dishwashers

Kenmore quiet guard standard ocassionally does not use/mix all soap supply and does not get dishes clean. Any ideas?


MIne did the same thing a couple of times. I found that I had put a casserole dish on its side in front of the soap dispenser...so it opened, but the sprayed water could not get to it. \015\012Hope this helps. ... Kenmore Dishwashers

I have a Kenmore Ultra wash Quiet Guard 3 dishwasher and the green flashing light that states its clean stays on and stays flashing. I can not even get it to start a wash cycle. please help. What is the button sequence that everyone is talking about that clears this? Thank you.


Hi\015\012\015\012\015\012Thanks for using FixYa. To resolve this you will have to reset the console. Do this by closing\015\012the door and press these buttons in sequence...\015\012\015 ... Kenmore 24 in. 15689 Built-in Dishwasher

My Kenmore SmartWash Sensor ATC Quiet Guard fills, heats up but does not wash. No action? I am not sure if I should call a repair man or just get a new one. I don't think it is more than 5 years old.


... Kenmore 24 in. 16539 Built-in Dishwasher

Dishwasher Problem... Hey, I'm sorry I can't seem to find this information anywhere else. I'm having a similar problem with my dishwasher (also a kenmore quiet guard) and I wanted to try to clean the filter. I'm not sure how to remove the lower arm of the dishwasher. There is a kind of plastic-screw in the middle of the lower arm, is that what holds it on? I'm afraid to try twisting it because I don't want to break it. How did you get it off of yours? I hope I'm not bothering you! Thank you, Je


You are right. The plastic screw needs to be removed. I have a Quiet Guard 4. My procedure is as follows:\015\0121. Remove baskets. Need to pop off the 'keepers' at the ends of the top slidding shelf supports.\015\0122. Remove bott ... Dishwashers

My Kenmore quiet guard standard model 587-15152400 is not getting the dishes clean AT ALL. It has hot water, water is draining, have not changed soap. Don't know why?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... Kenmore Dishwashers

Kenmore ultra wash quiet guard 1, soap dispenser not opening


... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Kenmore Ultrawash Quiet guard 3; can't get the clean light to turn off to be able to start cycle


Try pressing normalwash-heatdry-normalwash-heatdry-normalwash-heatdry-normalwash-heat then all the lights come on. \015\012Let run for a little bit. then keep pressing the start button... until the unit shuts off, then try running a cycle. ... Kenmore Dishwashers

The door on my Kenmore Ultra Wash Quiet Guard 575-D dishwasher will not lock. There is power to the machine, the door lock just seems to be jammed and will not close all the way.


Will the latch close all the way over when the door is open? If it will, check to see if the catch on the machine is loose not allowing the latch to seat all the way. ... Dishwashers

Model 665.13732k600 seriel FT4610713 dishes are not getting clean, they look like they have a film on them. Kenmore Ultrawash Quiet Guard Deluxe


I added vinegar to my dishwasher where it says to put a rinse aid and the white vingegar has greatly reduced the film on my dishes. HTH. ... Kenmore Dishwashers

Broken dishwasher We recently had a plumbing problem that resulted in the kitchen sink overflowing and flooding the kitchen. The cabinets to the left of the sink were full of water and the dishwasher to the right of the sink will not work. It says it is washing and using two different washing modes, but I cannot get it to start over. What can I do? It is a Kenmore Quiet Guard 2.


If there is no water in the dishwasher - i.e. it had finished a cycle, but now it is just the indicator lights that are on, then the chances are some water has got into the control system. It will probably dry out, given time. (maybe a number of days ... Dishwashers

I have a kenmore quite guard 2 and it shuts down completely after about 1 or 2 ( compete power shut down) and then after about 4 to 5 min all the lights on the key pad keeps blinking.


... Kenmore 17342 / 17349 Built-in Dishwasher

Cant get to the filter on a Quiet Guard 2 Kenmore dishwasher


Water is forced through the spray arms of a dishwasher by the unit's pump and motor assembly. The force of the water propels the spray arms, spraying water and detergent onto the dishes on the dishrack. Depending on your model, you may have onl ... Kenmore Dishwashers

I have a Kenmore Dishwasher Quiet Guard 1 Model Number 665.1784440. It will not fill up with water, but it will drain if I pour water into it. Help


Start simple, make sure water supply is ok. if this ok i would be lookin at the inlet valve, its solinoid could be faulty. located inside dishwasher where water hose screws on.\015\012\015\012also on dishwashers a broken wire inside the d ... Dishwashers

I need to tighten up my water inlet screws on my kenmore quiet guard deluxe dishwasher. The screws have a star or allen head with a little nipple in the middle. How do i go about tighten these? Where can i get a hollow allen wrench?


You can source these from any tool shop and is not a great issue. Also check out with the following link;Dishwasher tips ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0933 seconds