Having problems with your Kenmore Dishwashers ?

Kenmore d/w mod#66516029400

\015 Clean light will not quit blinking\015\012will not start a new cycle\015

Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kenmore Elite Dishwasher about 7... Problem with the Kenmore Dishwashers I have a Kenmore Elite Dishwasher about 7 years old. The Model # is 665-16462300. It works beautifully, except that about every 2 months the spray flow intensity ( and the cleanliness of the dishes) drops significantly. The cause is the metal screen located just upstream from the sump is clogged with food particles. I have taken apart the dishwasher several times to remove, clean and replace the screen. This fix wo


Check the inlet hoses; if the catch screens have sediment build up, that will reduce the pressure of the rinse water. Also, look for missing plugs on the rinse arms... ... Kenmore 24 in. 16462 / 16464 / 16469 Built-in Dishwasher

My kenmore dishwasher drain rinsh water slow - Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher


Hi,Here is a tip that I wrote that will help you with your dishwasher ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Kenmore dishwasher Have a kenmore 655.15889020 dishwasher which does not appear to be pumping water fast enough. No apparent blockages. Arms circulate very slow. Enough water in sump. Could it be the motor for some reason is running slow? Or maybe some valve is not closing properly.


Fatubu, are you sure you have the correct model number, Im not finding anything on the posted model. They had an issue on models close to this that had an issue with a twisted or missing seal in the pump assy. causing water to fill the pressure swit ... Kenmore 24 in. 16032 Built-in Dishwasher

Kenmore elite dishwasher stopped in middle of cycle with water still inside. Checked breaker. Replace the hole control panel, door latch from a used kenmore elite. Work for half a cycle and quit with water still inside just like the first time.


Here's your solution (free PDF) - Kenmore Elite Dishwasher Manual ... Kenmore 24 in. 16352 / 16354 / 16359 Built-in Dishwasher

Rattling noise in my kenmore dishwasher - Kenmore 24 in. 17512 Built-in Dishwasher


This is probably due to a defective motor. The fan blade will actually become disconnected from the motor armature and will rattle around on the shaft. It is easiest to replace the whole motor and pump assembly as a unit. They cost about ... Kenmore 24 in. 17512 Built-in Dishwasher

Kenmore dishwasher I have a kenmore dishwasher and in the middle of a cycle all my front panel lights went off. I have checked the power going into the dishwasher it is fine. I also checked the door latch it is fine. Not sure what else to check? Same exact problem model number 665.15934 We have had nothing but problems with all of our sears products - highly suggest to SHOP SOME WHERE ELSE before you get stuck too.


Check the continuity of the thermal fuse (part # 8193762). It's clipped onto the electronic control inside the console.Let me know if you need more help. ... Kenmore Dishwashers

Kenmore Dishwasher We have a Kenmore Dishwasher Model #  66516819990 the delay light is blinking and won't go off.  We tried hitting cancel and that won't work.  Any Advice . . . THANKS!!!


... Kenmore Dishwashers

Kenmore dishwasher HI i saw your name on the website look like you know your stuff. My kenmore dishwasher model #587.1518 has a flashing washing light i've tried different button seq. but nothing.I 've turned off the power too that didn't help thank you so much for any advice you can give me


Lexi, sorry for not getting back with you, I had to fly to the other side of the country for a week. You may be right about the door switch. First do this, with the dial set to rinse, press and hold the heat dry and start/cancel buttons togeth ... Dishwashers

I need to reset the mother board on my Kenmore dishwasher. Do you know the code for the Kenmore model 665-17032402. I was told by sears that they used to give this out but, because of a fire hazard they have stopped doing so.


The clean light sometimes flashes and just needs to be reset. To do so\015\012hit the keys in the following order. <Heated Dry> <Normal\015\012Wash> <Heated Dry> <Normal Wash> <Cancel>.The dishwasher will go throug ... Kenmore 17024 Built-in Dishwasher

Kenmore Elite I replaced most of my appliances 3 years ago with Kenmore Elite and I've had problems intermittently while the appliances were under warranty, but when the repair person arrives, no problem is detected. Once the appliance is no longer under warranty, the problem becomes persistent. At one point when I explained the difficulty, the technical support person said something to the effect of, "Oh that's an easy one to fix. All you need to do is...Oh wait, the warranty expired on the 3rd


Hmm, I'll start at the top :->. Well, first thing is that Kenmore doesn't manufacture any appliances. The only thing Sears has is the name recognition, therefore, they have GE, LG, Whirlpool, and others to make appliances for them and Kenmore s ... Kenmore 24 in. 15173 Stainless Steel Built-in Dishwasher

My Kenmore 13899 will not drain - Kenmore Dishwashers


Sounds like the filter is clogged. Try removing and cleaning it ... Kenmore Dishwashers

Kenmore we have a kenmore 665.1376 that is just over a year old. last night after about 15-30 min it shut down. there is water standing in the bottom but i don't think the float shut it off. checked the power breaker and everything seems fine there.


... Kenmore 15073 Stainless Steel Built-in Dishwasher

Kenmore dishwasher fault codes - Kenmore Dishwashers


Peace Friend,ngafm At your service!With an error code the only way to find and to repair this is,First unplug the washer and wait a few minutes then restart it like rebooting your computer when its acting strange!I ... Kenmore Dishwashers

KENMORE DISHWASHER STUCK IN WASH CYCLE it will not move off of this postion water heats up it cleans but does not move off this cycle. New 2008 Kenmore 1610 built-in dishwasher won't leeave wash cycle. repair person says it is supposed to take 3 hours.


... Dishwashers

My Kenmore Dishwasher Model #16769000 says its a Kenmore 665 will not unlock to restart the washer. The air dry light will not go off and we held it for four seconds and still it did not work. Help


Unplug the machine for at least ten mins or so, replug with cycle at start, try restarting cycle, if it still get locked on dry, then probably the control panel must be replaced. ... Kenmore Dishwashers

Kenmore Elite My top rack is not cleaning, but the bottom rack seems to be working fine. Has anyone else had this problem with a Kenmore elite?


I also have this problem, and my unit is only about 1 year old. The bottom gets clean but the top does not. I cannot see anything clogged or stuck open. \015\012\015\012I'd appreciate more possible answers.\015\012\015\012T ... Kenmore 15129 Built-in Dishwasher

Kenmore apartment size dishwasher will not fill it's a kenmore model #587.17252201


... Kenmore Dishwashers

Kenmore 587 Our Kenmore 587 drains water - rusty looking water - all over the kitchen floor. Is there something we can do to fix this? It was in our house when we moved in last year and has behaved itself up to now. Thank you, Nora Brownlie [email protected]


You may try the rubber gaskets and fasteners that attach your heat element through the bottom of the dishwasher body. This is the only full penetration of the shell involving metal that I see. You could see these fasteners if you remove the dishwashe ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

KENMORE DISHWASHER NEED A SCHEMATIC FOR KENMORE DISHWASHER MODEL 66516769000


Behind either the lower access panel or the behind the main door assy shlould be a tech sheet complete w/ trouble shooter and wire schematic ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Kenmore touchpads Yes, please kindly provide me the link for replacing Kenmore touchpads. Are they easy to replace by the average person without a lot of mechanical aptitude?


You can find it on Appliance Parts.com, Appliance Pros.com Discount Appliance Parts and Appliance Repair Parts.The model you included isn't actually the model number. The data tag is\015\012somewhere near the door gasket, so include that for s ... Kenmore 16372 / 16374 / 16379 Built-in Dishwasher

Kenmore My dishwasher was in my home when I purchased my home. It is a Kenmore Ultra wash 2, I am not sure which settings to use for basic dishwashing. When I run it it runs for over 1 hour. I don't want it to run that long.


Make sure you run water in your sink until it is hot before you start the dishwasher. On the newer dishwashers they will fill and drain until the water is hot enough so it takes longer if it starts with cold water. Normal time for a basic wash coul ... Kenmore 15129 Built-in Dishwasher

Kenmore 587 I have a Kenmore 587.1414 that is only 2 years old. I can hear it filling with water and then after a while it will drain, but does nothing in between. After the cycle has ran completely, I can open it and the dishers have never got wet and the soap door is open but the soap has just ran down the side of the door. What could be wrong? Motor gone out?


I think you are right. That would be the most obvious answer. Some motors are warrantied for 2 years or longer. ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Kenmore Quietguard Plus/Ultrawash - Kenmore


Drain hose may be partially clogged or kinked up. ensure that the hose is not bent up thus restricting the flow of water out. ... Kenmore 16602 / 16604 / 16609 Built-in Dishwasher

Kenmore 74362 My model# is 665.74362400 this unit is only just over one year old. My problem is it shut down and the quick rinse light started blinking. I have tried some of the button-reset procedures that were on some other responses but to no avell I even left it unplugged for a while. Any impute would be appreciated. I have a Kenmore Dishwasher Model #74362. After we run a cycle for a normal wash and heated dry the dishes are all very dirty and greasy. It is as if they were never washed. Th


I had the same issue and you will never beleive the solution.\015\012Steps to follow:\015\0121) run one full cycle with no dishes or soap\015\0122) run one full cycle with a dishwasher cleaner like Jetdry\015\0123) run one ful ... Dishwashers

My Kenmore dishwasher, about 5 years old, is not cleaning well any more. Glasses look cloudy,and I assume the bowls and plates are not clean also, but that's harder to detect unless I hold them up to light. I use a rinse agent. What's the problem? Is it worth having a service person look at it or should I just get a new one? It's a Kenmore Elite ultra wash dishwasher.


Although I used my credit card to pay for the live chat, it bounced me out before the service person could respond. So I tried another service and two people who do home repair told me what the problem was and what it would cost to fix it. Since the ... Kenmore Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.0602 seconds