Having problems with your Kenmore Dishwashers ?

Kenmore dishwasher lower spray arm loose - Kenmore Dishwashers


Answers :

Repair Help & Product Troubleshooting for Kenmore Dishwashers

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kenmore dishwasher lower spray arm loose - Kenmore Dishwashers


... Kenmore Dishwashers

My sears kenmore dishwasher model #665 is not getting my dishes clean. I took out the lower basket and discovered that the lower spray arm and the housing it sits on is very loose an wobbeling. How can I fix this?? There is a center knob, but it does not seem to be able to tighten down. What is wrong?


... Kenmore 15762 Dishwasher

Kenmore BuiltIn Dishwasher Stock 17512 Model 17512200 Type 575-0 Serail FM3309375 Probelm: Water sprays out of lower arm weakly, and not out of upper arm at all. Action taken: Unscrewed the 4 screws holding down the item underneath the lower spray arm, and then the small item under that. Found major refuse from years gone by, removed, cleaned. Reassembled, same issue. I suspect I have to get 1 more level down, to the intake for the pump? found 2 screws to remove, but was not suc


... Dishwashers

I have a frigidaire dishwasher - model number PLDB998AC1. There are two spray arms in this dishwasher - lower and upper. The lower works fine but the upper spray arms are not spinning. There is what I think adequate water pressure coming in from the top but no movement on the upper spray arm. Here is what I know: 1) The water pressure and spray arms alternate between top and bottom. 2) The upper spray arm moves freely when I push it gently. 3) I have removed the pump and cleaned out an


... Frigidaire 24 in. GLD2162RDC Stainless Steel Built-in Dishwasher

The lower spray arm came off during a dishwasher cycle and melted. The dishwasher is okay but I need a replacement spray arm for a Sears Galaxy dishwasher model number 587.15139400 I have searched google for replacement parts for this model and have not found a place where I can get a lower spray arm. Any help would be appreciated.


Sears parts dept ... Sears 24 in. 14181 Built-in Dishwasher

Lower spray arm will not spray water - Kenmore 24 in. 15689 Built-in Dishwasher


I just had a simliar problem with all spray arms and solved the problem by cleaning the food screen. Basically, it takes water pressure to make the spray arms rotate. Before assuming there is a failed part, make sure the spray arms are getting max ... Kenmore 24 in. 15689 Built-in Dishwasher

Frigidaire ultraquiet III dishwasher (fdb750rcq0) -- we took out the filter cup, lower spray arm and screen filter thing to clean them out and now can't get them situated right to snap back in. they're too loose and the dishes don't wash well now. any tips on seating these correctly?


... Frigidaire 24 in. FDB1050REC Stainless Steel Built-in Dishwasher

The dishwasher is not cleaning the dishes at all, so far I have done the following: Checked both sprayer arms and they move freely and do not appear to be clogged (I ran stiff wire thru holes in each The float is not stuck and moves up/down easily The water leavel in bottom of tub does appear to be low - so I added water filiing tub to heating coil - however this did not help and the water did not spray on lower or upper racks - this is an older model Kenmore Ultra Wash WHAT DO I NEED TO CHECK N


Heating element may have burned out. Check water temp during wash--should read between 130 to 140 F.If not the heating element,you may have to replace pump-motor assembly or wash impeller.Hope this helps. ... Kenmore Dishwashers

On a du943pwkq0 dishwasher the lower spray arm is loose


They are loose anyways. but check and make sure that the nut going down through the center of the spray arm is tight. do not overtighten though. its plastic and it breaks ... Whirlpool DU943PWK - Multiple Color Built-in Dishwasher

Kenmore 665 lower spray arm worn and loose at hub


... Kenmore Dishwashers

Hello, I have a Kenmore dishwasher model 665.13832K600 - is there a trick to getting the lower spray arm off and is where the filters are? I do not have my owners manual - but I tried to unscrew it by hand and it gets stuck and I can't get the plastic screw out?! I believe mine needs cleaning as it is taking longer than usual to drain. Please help!!


... Kenmore Dishwashers

How to remove lower spray arm kenmore 17532 - Kitchen and Much More Dishwashers


... Kitchen and Much More Dishwashers

Doesn't clean, lower arm seems really loose - Kenmore Dishwashers


Even if this is loose the water pressure must be maintained. So checck if the pump is pushing the pressure if not remove and test outside to clean and reset.\012Now the second part is to tighten the arm movement , must look into why the arm has ... Kenmore Dishwashers

Have a Kenmore dishwasher Model # 363.1411691 and can't get the lower spray arm off to tighten it up.


... Kenmore Dishwashers

I followed 'Mindcell's' advice on fixing my Kenmore QuietGuard 4 dishwasher, and I managed to clear out all the food particles that have accumulated. I suspect that is probably why the middle spray arm has not been very effective. However, in my repair, as I was screwing in the star screw that holds the cover of the foodscreen (the lower most star screw), I managed to overturn it and break it. Thus, the food screen is only held by a plastic clip, and from what I can gather, pressure from a


Hello Lily - You could use the machine this way, afterall all that could happen is for the cover to come loose and end up in the bottom of the machine.\015\012\015\012That said, why not remove that broken screw with a small pair of vise g ... Kenmore 24 in. 15689 Built-in Dishwasher

My Kenmore Dishwasher isn't cleaning the upper rack of dishes, and the spray arm isn't rotating. I have cleared debris from the screen. Where do I look next? The lower rack is operating perfectly.


... Kenmore 24 in. 15932 Built-in Dishwasher

Kenmore dishwasher model #: 15829000 It will fill & heat, but won't run/wash on any cycle. I was told the motor may be frozen or jammed by an object, but am not sure how to get to it. I assume i have to remove the lower spray arm assembly? Could there be another reason? This happened before, but it began working fine again a day later. It has worked fine since for almost a year now.


There should be a 665. xxx etc as the model no. before teh 15829000 that you have mentioned.\015\012Will need the full model no. of your dishwasher in order to give you some solutions for the problem. If you are not hearing any sound at the tim ... Dishwashers

Lower spray arm does not spin on my bosch dishwasher model number SHV55M03GB/40. However the top spray arm does spin. I have tried cleaning filters and the actual lower spray arm but found to blockages etc. many help will be greatly appreciated


S.Africa doesnt have same modles as you, but will try and help. Some washers give the operator a choice to run either the top spray arm or the bottom one independently, and/or both together.\015\012Almost certainly, there is a valve that is po ... Bosch 24 in. SHU66C02 / SHU66C06 Built-in Dishwasher

Kenmore elite dishwasher 15912: lower arm won't spary vigourous


... Maytag 24 in. MDBS661A Built-in Dishwasher

Dishwasher Problem... Hey, I'm sorry I can't seem to find this information anywhere else. I'm having a similar problem with my dishwasher (also a kenmore quiet guard) and I wanted to try to clean the filter. I'm not sure how to remove the lower arm of the dishwasher. There is a kind of plastic-screw in the middle of the lower arm, is that what holds it on? I'm afraid to try twisting it because I don't want to break it. How did you get it off of yours? I hope I'm not bothering you! Thank you, Je


You are right. The plastic screw needs to be removed. I have a Quiet Guard 4. My procedure is as follows:\015\0121. Remove baskets. Need to pop off the 'keepers' at the ends of the top slidding shelf supports.\015\0122. Remove bott ... Dishwashers

Kenmore dishwasher spray arm too low, hits heat element bracket


There is a picture of the inside of what I believe is your dishwasher. It is not great but might give you some idea of what might be missing. http://www.bobgolds.com/dishwasher/home.htm ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

Whirlpool dishwasher lower spray arm removal


... Whirlpool GU2800XTV Dishwasher

My dishwasher spray arms were clogged with calcium buildup so I cleaned one and replaced the other. I also removed the fixed disc-shaped device underneath the lower spray arm and found the particle filter was clogged- so I cleaned it out. The dishwasher ran fine for a few times but then the filter clogged again, and again, and again. Now I need to make a routine of disassembling the parts to get at the filter every week because the filter no longer clears itself during the wash and/or emptying c


You may want to check your hot water tank. It may need drained and cleaned, Or you may have the rod in the tank disintegrating. Also check you water faucet areators to see if they have calcium pieces too. ... Maytag Dishwashers

I have a KUDS03CTWHO KitchenAid dishwasher. It started not cleaning the upper tray well a few weeks ago and now the lower one is not getting cleaned very well either. I have disassembled and cleaned the 3rd level , upper and lower spray/wash arm assemblies as well as the feed tube assemble. These were not blocked or glogged. There appears to be less spray coming out of the upper and 3rd level spray arms they before but as I said there is no blockage. I also cleaned the bottom filter. There has b


\015\012Hi\015\012\015\012The issue seems to be with the float switch\015\012assembly that is bad and should be replaced. Please check this ... KitchenAid Dishwashers

My dishwasher did not clean well. I replaced the seal on the bottom spray arm. there is a wobble now. the nut does not seem to screw down tightly. there is nothing wrong with the nut, it simply does not reach. I don't know if the lower arm is supposed to wobble, or if the nut should screw down tight. I can't seem to find a picture anywhere so I can visualize exactly how the spray are fits together. Is there a diagram on line? Dishwasher model: whisper quiet #KUDM25SHW1 bought in 1999


... KitchenAid Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2180 seconds