Having problems with your Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173 ?

The top rack on my kenmore ultra wash 3 dishwasher does not come clean and now even the bottom is starting to not clean


Answers :

First\015\012\015\012 perform a vinegar cycle wash in the dishwasher. Pour a cup of vinegar \015\012into the bottom of the dishwasher. Keep the temperature at the highest \015\012setting possible and perform a wash cycle.Then start using a dishwasher \015\012most probably that would solve the problem. If this does not solve the \015\012problem then there must be some parts worn out or faulty creating the \015\012problem.

There are many probable causes of failure .

To\015\012 clean the dishes the water temperature is essential.It the water is not\015\012 hot then the dishes will not be cleaned properly.So check the water \015\012temperature.

Also check the filter in your dishwasher.Clean the filter if there is accumulation of debris in the filter

If you are in an hard water zone , then try reducing the amount of detergent used and then try cleaning the dishes.
Repair Help & Product Troubleshooting for Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

The top rack on my kenmore ultra wash 3 dishwasher does not come clean and now even the bottom is starting to not clean


First\015\012\015\012 perform a vinegar cycle wash in the dishwasher. Pour a cup of vinegar \015\012into the bottom of the dishwasher. K ... Kenmore PRO 24 in BuiltIn Dishwasher with Ultra Wash HE Filtration 13173

The top rack dishes do not get cleaned. I have run the vinegar rinse. The bottom rack dishes get cleaned. It doesn't even look like the top rack dishes get wet. I ran the washer without the top rack in and I think water was coming down from the top. What can I do?


Hi, \012I have an older dishwasher also and recently my wife alsocomplained about it not cleaning right... so me being the man I am tried invain to clean the things... Bought new spray arms online and installed them inminutes...now the thing works li ... Dishwashers

The top rack is not cleaning. The dishes on the bottom rack come out clean but the ones on the top rack don't look like they have even seen water?


\015\012Hi\015\012 \015\012 \015\012If you are noticing that the dishes are not clean, then there are a few things to check for. Check the soap powder if it ... KitchenAid 24 in. KUDS02SRSS Stainless Steel Built-in Dishwasher

Just bought new Kenmore Ultrawash (1 step down from Elite) and the dishes on the bottom rack are not coming out clean - top rack seems to be doing ok. I'm using powdered D, running hot water 1st, have tried different settings, nothing helps. Should we return it (what a pain!)? Is there a trick to installing that could cause this?


Hi\015\012\015\012 \015\012\015\012 \015\012\015\012Thanks for using FixYa. First of all please check the\015\012Water temperature by using a thermometer inside the dishwasher to measure ... Dishwashers

Kenmore dishwasher. The upper rack is not getting clean. Even very light residue remains. And, detergent is left in door at end of cycle. The bottom is filling up, so I don't think it's the intake valve. Also, all the blade openings appear clear. I am noticing that hot water is not filling the dishwasher when I first run the cycle. Even if I have hot water running in the sink, the dishwasher fills with cold or warm water. So, I think this is the problem. What should I do? Thank you in advance!


I find it odd that the dishwasher is filling with cold water if the water is hot at the sink. It sounds like the dishwasher is connected to the cold water line rather than the hot. Check under your sink; if you've got standard plumbing, the dishwas ... Dishwashers

My dishwasher barely cleans my dishes. i basically have to wash them before i place them into the dishwasher. also, once they come out there is usually residue of the dishwashing detergent especially on the top rack. another problem is that the wheels on the bottom are all warped and come off every time i use the machine. we have had this appliance not even for 5 years and it is driving me crazy! any advice/ solutions would be very helpful.


Sounds like the pump or drain is stopped up. is there water in the bottom after the Cycle is done? ... GE 24 in. Profile PDW8280JSS Built-in Dishwasher

We have a built in GE dishwasher. It has worked fine for about 4 years but now the glasses in the top rack will not come clean. I have cleaned all the holes where the water comes out but I think the sprayer that is beneath the top rack (the one that is attached to the bottom of the top rack) is not rotating. We had someone out to take a look at it and they said it was fine. It isn't fine as it is not cleaning the dishes. Is there a reason that the bottom sprayer is not turning?


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Maytag Dishwasher

My model # 665-16264402, Kenmore Elite. It's not cleaning the dishes on the top rack & barely on the bottom after even running it twice. It has an automatic filter so I know that's not it. Please help. Any ideas? Colleen


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Kenmore 24 in. 16269 Built-in Dishwasher

My bottom dish washer was draining the water on the top dishwasher and there is always water left over on the top.I remove the pipes and put CLR to clean up drain.Start both dishwasher on rinse cycle ( 12 min cycle) then at 10 min.they start blinking with a No tap (may be water ) sign on it. I run the cycle again now a F1 sign coming with a tool sign.And both dishwasher going crazy ,it turn on by itself even I powered them off.


Hi\015\012\015\012\015\012Thanks for using FixYa. F1\015\012error means that the flood switch has been activated. You'll need to reset it by poweri ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My Maytag Quiet Series 300 is not cleaning my dishes very well at all. My glasses always have grit left in them (even with Jet Dry), my coffee mugs have film left in the bottom of them and now even my plates and bowls aren't getting clean. I don't even put my pots or pans in there, so I'm not sure where the grit is even coming from. We have city water and I use a powder to clean with. Also, there has always been a film of dirt that never seems to get rinsed away right where the door opens. Also,


First problem: The film on dishes and glasses. Try another detergent. Manufacturers removed all the phosphates from dishwasher detergents and there are many complaints. I have had good luck with Finish Quantium tabs. Also have purchased Cascade i ... Maytag 24 in. MDB5600A Jetclean II Built-in Dishwasher

I have a 5 year old whirlpool gold dishwasher. The top shelf dishes are not coming clean. They do not come clean after purposely leaving the bottom rack empty. Is it possible the rotating arm under the top rack is not going around?


Lift off the rotating arm,and soak it in lime away, or crc. It's probaly has lime deposits,keeping the pressure down ... Whirlpool Gold 24 in. Built-In Dishwasher Dishwasher

I have a kitchenaid Model KUDW03CTBL2 dishwasher. It is pumping water, but the top sprayer and the one under the top rack just have a little water coming out. Not enough to make them spin. We also noticed the water in the bottom when opened is not as much and it is cool not hot. The dishes on the top rack will not clean, and the bottom is not completely clean. We have checked water pressure and water tempurature through the house, All is operating fine. This dishwasher is only 1 year and 10month


... KitchenAid Dishwashers

I have a Kenmore Elite 665 that is almost two years old. Suddenly, last week, the top rack is not getting clean. We use a regular cycle, no heat dry. Glasses and bowls stay on the top rack stay dirty, everything on the bottom rack is clean. Is there a gasket that fails on the top rack sprinkler?


It appears your jets or riser is clogged with sediment in this instance.For replacement parts - head on over to PartSelect.com or RepairClinic.com and enter in your full model number for a full parts listing.I recommend both sites b ... Kenmore 24 in. 17482 / 17484 / 17489 Built-in Dishwasher

The dishes wont come clean on top rack? the bottom rack is clean..we tried cleaning filter and making sure the wash arm wasnt hitting anything..we tried different wash settings..please help Jessie Oakes


Check that the top rotating arm jets are not block. These often get blocked by pieces of food or other solid particles, this is the normal problem. ... Whirlpool DU1055XTS Built-in Dishwasher

My Kenmore 13743 is 3 years old and was washing perfectly until a couple of months ago. It has become so bad that it won't clean anything on the top rack and barely anything on the bottom rack. In fact, I just pulled a butter knife out of the rack that still had butter on it! Not normal... I do not know how to remove the bottom washer arm to get at the chopper, filter, etc. Please help


Hello,\015\012\015\012Welcome to FixYa,\015\012\015\012You are likely right on, this is very common with these unfortunately. Hopefully this will help.\015\012\015\012**Unplug the unit or turn off the powe ... Kenmore 13743 Staimless Steel Built-in Dishwasher

My Bosch dishwasher SGS46E26GB/90 makes a knocking noise when started. the timer does not advance and the check water light comes on.There is water in the bottom (up to the bottom of the door) . If I reset the DW the water drains ok. If I mess with the buttons E3 shows on the display the 'quick' light stays on and the eco light flashes. I've checked the filter where the water hose is fastens to the rear. I've cleaned the filters at the bottom of the DW and cleaned out the pump area under them.


... Dishwashers

The dishes are not getting clean on the lower rack even after several washes. What can be done?? The top rack comes out clean. It almost seems that the water flow on the lower rack is limited. Something as simple as coffee stains are not be rinsed off and there is a white film left on the dishes.


The problem is hard water. There is a new product out called the dishwasher filtration system. It filters the water before it enters your dishwasher. It works amazing and has a money back guarantee. You will love the ... LG LDF6810ST Stainless Steel Built-in Dishwasher

Ge Triton dishwasher GSD5500GOOWW was not cleaning like it used to- I cleaned screens at back bottom-very dirty- also-detergent cup stuck opne - took door apart and got it unstuck - it works fine now. - it seemed to do better but now it is cleaning poorly. It seems to fill and start a lot sooner than before - after 30-45 seconds it starts up. I tested the water temp and it is 90 degrees! Hot water coming in is at 105 degrees. Also - it is leaving a white residue on dishes - didn't do that be


Hi,The scum, film and white\012residue problems have started since the reduction of\012phosphates in dishwasher detergents.Here is a tip that\012will help you to solve the problem of films, residue, and scu ... Kenmore Elite Stainless Steel 24" BuiltIn Dishwasher with TurboZone Rotating Spray Jets 13103

Upper spray arm is not turning and I don't think water is coming out. Dishes on top are not coming clean. Dishes on bottom are clean (as clean as they get with this dishwasher). How do I remove upper spray arm. Also I'm not sure how to remove lower dish rack to access upper spray arm. Any help appreicated. Kitchenaid model KUDP01FLSS5 Chris


Hi Chris,It sounds to me like a restriction in the pump. I put together some information here on cleaning it out. If you try these please give me some feedback as to if they help or not.Thanks! ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

Kenmore Elite My top rack is not cleaning, but the bottom rack seems to be working fine. Has anyone else had this problem with a Kenmore elite?


I also have this problem, and my unit is only about 1 year old. The bottom gets clean but the top does not. I cannot see anything clogged or stuck open. \015\012\015\012I'd appreciate more possible answers.\015\012\015\012T ... Kenmore 15129 Built-in Dishwasher

I have a 10 yr old ge profile dishwasher. The dishes on the top rack are not getting clean. Sometimes it doesn't even seem like the dishes are very wet I took out the upper sprayer arm and ran water through it just fine. What else may be wrong? The bottom rack cleans just fine.


Bad circulation pump. ... Dishwashers

Recently our GU1100XTLQ1 started having a problem. It barely cleans the bottom rack, and barely gets top rack wet. The soap stays stuck in the dispenser. I can't see inside as it runs, but my guess is that not enough water is being shot out of the various spinning arms. From looking at diagrams it would appear that this dishwasher uses a pump to circulate water from the bottom of the cavity through the spinning arms. Is my problem a dying pump?


... Whirlpool GU1100XTLB / GU1100XTLQ / GU1100XTLT Built-in Dishwasher

After running our dishes through a wash cycle we noticed there was still a lot of food stuck on the plates & glasses etc. We cleaned out the trap but due to the murky water in the well, we also pulled out the racks & removed the bottom plate. The underside was greasy and had a lot of grim stuck to it as well as the bottom of the drawer itself. We washed the filter trap, swing arm and plate in the sink. We loaded it with the dishes that previously did not come clean and ran a full cycle. The


Hi,\012\012\012\012\012I\012have an older dishwasher also and recently my wife also complained\012about it not cleaning right... so me being the man I am tried in vain\012to clean the things... Bought new ... Fisher and Paykel 23 in. DD-603SS Built-in Dishwasher

My Frigidaire Dishwasher FDB1050RES2 gets stuck in a rinse cycle. The light on the front will be lit "clean" but the bottom of the washer is full of water. Opening the door does not turn off the "clean" light. For me to get it to run, I have to unplug it, plug it back in, push the start button until the ?washing? light comes on. I then push the start button once more and the dishwasher will begin to drain. I open the door as soon as I hear the water stop draining into the sink drain. This


By the descrition you are giving you will need to replace the main control board.Part number 154568401.you may also need to check the float switch.The part will run about 110.00 dollars from a local parts store ... Frigidaire 24 in. FDB1050RE Built-in Dishwasher

GE Dishwasher, model: GHDA470MBB When you turn it on, the motor seems to run for a minute or two and then just stop. It started not cleaning the top rack, I ran JetDry hardwater cleaner in it. Then the bottom rack didn't seem to be getting clean either. Next, it just doesn't seem to work at all as described above. It is fairly new, bought July 2006 (but wasn't used from March 08 to August 08). Thank you for your advice.


... GE GHDA470MWW / GHDA470MBB Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1807 seconds