Having problems with your Kenwood KDW243A Builtin Dishwasher ?

I am getting an E1 alarm on my Kenwood KDW 243A/A dishwasher can i fix this


Answers :

I am getting e1
Repair Help & Product Troubleshooting for Kenwood KDW243A Builtin Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I am getting an E1 alarm on my Kenwood KDW 243A/A dishwasher can i fix this


I am getting e1 ... Kenwood KDW243A Builtin Dishwasher

My kenwood KDW12SL3A dishwasher dysplays E3 error every time I use it. dishes don't get cleaned properly. Can I fix it myself? if not how much will it cost me to get it fixed by a professional? thank you


Hi\015\012\015\012E3 error code neans the water is not being heated to the required temperature in the machine.\015\012\015\012This may be either a defective heating element or faulty thermostat.\015\012\015\012It ... Kenwood Dishwashers

I have a kenwood dishwasher kdw8st2a i;m getting code e4 overfilled how do i fix this


Error 4 says in the manual it means 'overfilled'! pretty useless info really. What it actually means is water in base of unit, normally caused by leaking pipe, check pipe connection at the back of the upper tray When you push tray in it connects with ... Dishwashers

Dishwasher I am getting a run around with getting my LG dishwasher fixed properly. We had a tech more than once come in and look at our dishwasher. It has not been fixed and never dried the dishes properly. It is now leaking and going to a "del" level when we attempt to wash the dishes. It is also leaking on our fairly new tiled floor and under our new kitchen cabinet. Your tech stated the dishwasher was not installed properly. The installation dept , Francine stated it is not their problem


Not sure what you mean by a "del" level, but as far a drying issues:\015\012\015\012LG chose to use a very energy efficient drying method which relies on the residual heat of the dishes to help dry them rather than many manufacturer ... LG LDF6810 Built-in Dishwasher

We came home from holidays a few years ago and the dishwasher (Westinghouse 905) just didn't turn on. We've tried it repeatedly since then and are unable to get it to turn on. The power point works for other appliances. Should we replace it or could someone fix it? And is it a plumber or electrician you get to fix dishwashers?


Appliances that sit without use, usually have more problems than just the original problem.\015\012\015\012In your case I would first check the power conection on the dishwasher. located under the machine\015\012\015\012If thi ... Dishwashers

We have a kitchenaid dishwasher, kudi22ot3, installed in 1992. It is not cleaning dishes even thought the tub is getting water, and we've run dishwasher magic through it a couple of times. The dishes will get clean for a few runs, and then will stop getting clean. Is it time for a new dishwasher or can this one be fixed? Thank you.


Hi,There are 6 major reasons that could affect the cleaning.A nice guide you could follow is :-http://www.partselect.com/dishwasher+dishes-not-clean+repair.htmOther than this, you need to check the pump. Make sure ... KitchenAid Dishwashers

Dishwasher how do i fix a broken roller. the rollers are fixed to the wall of the dishwasher. how do i get the wheel hub off the wall. the machine is a kenmore elite dishwasher mod# 665-16469300 ser# fp4803075


... Kenmore 24 in. 16462 / 16464 / 16469 Built-in Dishwasher

Installing model 665 kenmore dishwasher with granit counter top.The side bracket we are trying to use need to be snap of at the line to get dishwasher to fit right.The problem is we cant get to the screw the side of the washer is in the way and no hole is in the side of the washer.Need a real fix.


... Dishwashers

We have a Kenwood KDW8ST2A dishwasher. We used to get the error code E3 (when still under warranty) and were told not to use dishwasher tablets as it generated too much foam. The problem has been intermittent but now we get the E3 error every time, no matter what program we run, or how little detergent we put in. I've a feeling its not heating up properly, is there any way to check the heating element? Is it worth attempting a repair?


... Kenwood KDW243A Builtin Dishwasher

I have a Bosch DLX Series (SMU4092UC/14) dishwasher that I can't use because the detergent dispenser doesn't open automatically during the wash cycle so the dishes only get sprayed with hot water but no detergent. Is there a fix for this? Or is it time to get a new dishwasher? I know this one is old since I've lived in my house over ten years and it was there when I moved in.


... Bosch Dishwashers

I keep getting an E1 error on my LG LD-2120W model dishwasher, can you advise what this means so l can either fix it or get it fixed. Thank you


Leakage Error E1\015\012\015\012\015\012\015\012\015\012The excessive RPM of Washing Motor happened during Washcycle due to water leakage.\015\012\015\012Water leakage in ... LG Dishwashers

My GE dishwasher's door is stuck shut ~ I'm assuming a broken latch. I was told to fix the latch, the dishwasher has to be taken out from under the counter top (in order to get the door open). My problem is: with the dishwasher door stuck shut, it's impossible to unscrew the dishwasher from the countertop... Any helpful hints? Pleeeeeeeease (all of my silverware is stuck INSIDE the locked dishwasher - LOL!)


Well I'll try to help you get this opened. I don't know how much space you have at the top side edge of the dishwasher. You need a long stiff rod like a metal clothes hanger straightened so it can reach from the side to a little past the dishwasher m ... GE Profile PDW9880NSS Stainless Steel Dishwasher

We live in an apartment and our hot point dishwashers timing is all off and i thought if i could fix it myself, i'd love to do that instead of calling our manager, i will call him, but if its an easy fix i'd like to try it out.. it will just stop in mid cycle, and you have to manually more it a fraction of an inch to get it restarted, then at the end it doesnt fully drain, and the drying takes forever, so if i cant fix it, i'll ask for a new one..


It might need a new mechanical timer (sounds like the timer is sticking) installed and the parts will cost money... so you might want to go the route of the manager. The dial that you turn to set the dishwasher is part of the mechanical timer. Someti ... Dishwashers

I have a GE Profile dishwasher #PDW8880J03SS. There is a burning plastic smell that came from the dishwasher and the dishwasher was incredibly hot when I touched it. Should I try to get it fixed or buy a new one?


... GE 24 in. PDW8880LSS Stainless Steel Built-in Dishwasher

If my dishwasher is not getting water in and it is over 15 yrs old, is it smarter to replace it or should I go to expense of getting it fixed? I am not sure what the cause is, but I do know it is not getting water.


If it is only water inlet screen for the input of water or the input automated valve I would question keeping it. Sometimes it is better to invest in a quick fix. \015\012\015\012This gives you time to buy what you want . Insted of reacti ... Dishwashers

I have a kitchen aid dishwasher. The upper spray arm is getting water and getting enough water pressure but wont seem to spin. Ive ran a lot of tests but nothing. ive cleaned out the spray arm and port that gets water to the spray arm. Cant seem to fix it. Any ideas?


Hi,When my wife started complaining about her dishwasher not getting the top rack clean this is what I found and I wrote a tip about it...Dishwasher Spray Arms not Spinning ... KitchenAid 24 in. KUDI02IRBS Stainless Steel Built-in Dishwasher

Whirlpool dishwasher I have a 2.5 year old Whirlpool dishwasher and all of a sudden it stopped working. It is getting power because the Clean light just keeps blinking. Do you have any idea if it is something I can fix for cheap or is the unit junk?


I had the same problem with mine awhile back. I tried clearing it out like the book said and it would start blinking again when I started it. Then it wouldn't do anything. Based on research, I decided to replace the heating element and that solved th ... Whirlpool GU2400XTP Built-in Dishwasher

Hello - our GE triton dishwasher door latch will no longer ''latch''. It gets stuck about 1/4 of the way. I took off the panel and looked at the latch. Seems one piece of it gets ''stuck'' with another lever. Not sure how to fix it?


I am not familier with the Triton however on many under counter dishmachines with a front door such as the CMA L1X one or both latch or catch is bolted or screwed to the frame in a manner that can be adjusted by loosening the fasteners and realigning ... GE Dishwashers

Dishwasher Moffat Model MSC3504G02WW the door when open sits with a decided slant so that the bottom tray roller into the body of the dishwasher. I expect that I must take the door of and correct the problem from within. How do I get the door off and what could be jamming the door open? How do I fix it? george


... Dishwashers

Hi i have a Simpson dishwasher EZIset 52B850wj*05 The problem is the timer that you pull out to turn on and change the cycle will turn but won't engauge into the different cycles. I have had this fixed once and it worked for maybe 1 month and then the same problem & I refuse to pay to get it fixed again especially if it is going to happen agian and again. Toni


HI. This will occur when there are issues that concern the timer motor. This mechanism is responsible for the forward advancement of the timer plate over the dial cogs. if the motor is faulty, it will cause the cycle to not advance correctly. If this ... KitchenAid 24 in. KUDP01IL - Multiple Color Built-In Dishwasher

GE 18" dishwasher getting VERY loud. Well over 100db. Is this a sign it is dying or can I get it fixed? It has gotten louder in the last year. It still washes about the same but sounds as if it is on its last legs. Is this something you are aware of and is a serviceable issue / parts or is it fatal?


May not be fatal. Could just need a new motor. ... Dishwashers

When my dishwasher gets to what seems to be the second cycle it makes a strange noise like something is struggling to get going and is jammed. It was leaking out the front and then was fixed and this started


Could be a chicken bone or a toothpick or anything really. Hard to say without digging in there. Be nice to have a manual would it not? ... Frigidaire 24 in. FDBB944C Built-in Dishwasher

My 6-year-old dishwasher is not getting my dishes clean. glassware feels gritty; flatware looks dirty. I've tried cleaning the interior, and running a potscrubber cycle with the dishwasher empty except for a coffee mug filled with vinegar. What is wrong, and can I fix it? Model number is KUDP01FLBL2.


... KitchenAid Dishwashers

Bosch Dishwasher Cycles will not stop running. They keep starting over. Help please!! Our 2 year old dishwasher will not stop running. It gets to the end of the cycle and starts over again. Plus, the cycles seem to have gotten longer. We called the Bosch repair number and they want $150 in cash to come out and look at it. Then they will come out and fix it!!!! Unbelievable!!!


Carry out a reset.\015\012This should reset the board back to factory settings,\015\012Deep Diver ... Bosch 24 in. SHU5305UC Built-in Dishwasher

Had a clogged garbage disposal, once fixed, the dishwasher stopped getting water to it, sounds like its running, but no water coming to the cycle, Its a bosch dishwasher, motor seems to run, drain working,but no water to it.


If you didn't do the disposal fix yourself then there's a possibility that whoever did it closed the water valve to the dishwasher although there is no good reason to do that...\015\012\015\012I would check the valve then make sure that a ... Bosch 24 in. SHU43 Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2551 seconds