Having problems with your KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher ?

Kitchenaid superba kuds01ijbs0 rinse only light flashes

\015 The rinse only light flashes and can't do anything else. I tried to the kedpad dance and doesn't work. What else should I check? or What could be the problem?i have the same problem...cant find an answer yet....let me know if you find a solution. \302\[email protected]\015\012\015\012thanks!\015

Answers :

Hi there.See if you can find the reset button.If you can't find that unplug it and plug it back in to reset.That should fix the problem
Repair Help & Product Troubleshooting for KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kitchenaid superba kuds01ijbs0 rinse only light flashes


Hi there.See if you can find the reset button.If you can't find that unplug it and plug it back in to reset.That should fix the problem ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Kitchenaid superba kuds01ijbs0 rinse only light flashes


Hi! there only the solenoid valve for water supply has reciving a source to activate by your timer,the sequence operation of diswashing process has ben ignore,so the faulty was on your timer switch.disabling the motor to function you can check this i ... KitchenAid 23 in. KUDD01DPPA Stainless Steel Dishwasher

Good morning. I have a KitchenAid KUDM01TJ with a constantly flashing "Rinse" light. when I hit the "Cancel" button, it too flashes in the same time with the Rinse light. I left the machine alone, came back a few days later and saw that the issue had resolved itself - but I didn't use the machine. A few days later, the "Rinse" light was flashing again and naturally, I hit "Cancel" to see if the same thing happened and it did. This time the lamps are still flashing. I read through the other repo


No its not the problem of button secquence.its the problem of keypad circuit this is creating this problem.as the circuit is getting overheated and it stops working.the key pad sometimes functions and sometiomes doesnot.in this case the key pad circ ... Dishwashers

I have a Kitchenaid Dishwasher, model KUDM01TJWH0. It runs through the washing cycle properly, but then the Rinse Only light begins to flash and it does not drain. I have tried hitting the Cancel/Override button (also tried hitting all other buttons, but they were ignored too), but it also begins to flash with the Rinse Only light together. If I unplug it, wait a few moments, plug it in and all the lights are off when it comes back on, wait a few moments and hit Cancel/Override, it empties and s


... KitchenAid Dishwashers

Hi, I have a KitchenAid Superba diswasher model #KUDSO1FLSS2 that has quit working. All the buttons seem to work and the lights light up as they should but when you hit the 'start' button the light that you selected for whichever cycle would flash once, then close the front door and dishwasher would start. The 'start' button was acting up and would have to press a few times before light would flash and then the dishwasher would work. Now everything lights up but start button does not work. Opene


Hi.Test the start button switch.The switch is tested by disconnecting power and reading Ohms, this will tell you if it does open and close the circuit.If the start button is part of the control assembly, then this kind o ... Dishwashers

I have a Kitchenaid superba monterey 21 model that does not work all of a sudden. No lights work when the buttons are pressed with the exception of the rinse only light. That will come on if I press rinse only, but the rinse never starts.


... Dishwashers

I HAVE A DISHWASHER, KITCHENAID SUPERBA, I DON'T HAVE THE MODEL OR SERIAL NO#. THE ONLY NO#. I CAN FIND IS 8270140, THE DISHWASHER IS NOT RESPONDING TO ANY COMMANDS, THE RINSE LIGHT IS BLINKING AND THAT IT!!! I TRIED TO CANCEL BUT THE LIGHT COMES ON LIKE DASHES ON THE SGREEN THEN WHEN I HIT CANEL AGAIN IT GOES OUT, AND THE RINSE LIGHT JUST KEEPS BLINKING. HELP ME I THINK IT JUST NEEDS REST BUT I DONT KNOW HOW ? I CAN WITH THE HOUSE WHEN WE BOUGHT IT, HELP!!!! THANKS MARLA


I HAVE A DISHWASHER, KITCHENAID SUPERBA, I DON'T HAVE THE MODEL OR SERIAL NO#. THE ONLY NO#. I CAN FIND IS 8270140. The unit is not drying the dishes?\015\012 ... KitchenAid Dishwashers

Kitchenaid KUDi01ilWH My Kitchenaid dishwasher has stopped responding. On the front panel, the Cancel, Rinse Only, and Hi-Temp Scrub lights aer flashing regularly and un unison. Cannot find any indication of what these error lights mean. Thanks for any help.


... KitchenAid 24 in. KUDI01IL - Multiple Color Free-Standing Dishwasher

Kitchenaid dishwasher add dish light and rinse only flashing


... KitchenAid Dishwashers

My KitchenAid dishwasher (KUDM01TJ) is getting hung up during the rinse cycle. The Rinse and Cancel/Drain lights flash. If I hold Drain button, nothing happens. But by morning it will drain.


... KitchenAid KUDM01TJBS Dishwasher

Kitchenaid normal light flashing - KitchenAid Kitchen Aid Superba Series Dishwasher Used Kuds011jbt0


... KitchenAid Kitchen Aid Superba Series Dishwasher Used Kuds011jbt0

Kitchenaid dishwasher The clean light was flashing 7 times, so I did read and try the solution SaniRinse-EnergySaverDry-SaniRinse-EnergySaverDry and this did get the machine to unlock and start up. Thank you! But I'm noticing that no watre is going into the machine. I can hear it drain some water. It is very hot and steamy in the machine so no heater problem, but I don;t see any of the soap on the bottom of the machine rinsing away. I'm afraid its stopping because the motor is overh


... KitchenAid 24 in. KUDP01IL Stainless Steel Free-standing Dishwasher

My KitchenAid dishwasher model KUDM01TJBS0 has the NORMAL WASH and RINSE ONLY button lights constantly flashing. No other buttons respond. Is this worth fixing?


The blinking buttons indicate the buttons are bad. The console will have to be replaced. ... KitchenAid Dishwashers

My kitchenaid dishwasher is not working properly. The light above the button that says "Rinse Only" is flashing and there is no way to stop it or turn the dishwasher on. How can I fix it?


... KitchenAid KUDI01TBK Dishwasher

The rinse only light flashes - KitchenAid Dishwashers


I have no idea about the model number of your appliance, however, the error "Rinse Only" light flashing, indicates that the keypad interface is bad and needs to be replaced.As the dishwasher detects there is a key pressed and stays press ... KitchenAid Dishwashers

I have a Kenmore Ultra wash 665 15895 dishwasher. It will not run any cycles. Symptoms: When I first close the door, the "Quick Rinse" light is on and the number 18 is displayed. When I push any button, the "Quick Rinse" light flashes continuously. If I touch any other button, both the "Quick Rinse" and "Pots and Pans" lights flash continuously. No matter what buttons I press, the behavior is the same. I've tried turning the power off and on, same behavior. The only button that doe


\015\012HiThis may be an issue with heater circuit, door switch or wash pump. Press and hold the heated dry/air dry button for 15 seconds....After, 5 minutes check if you are still getting the same error. If yes, ... Kenmore 15899 Built-in Dishwasher

Rinse only light is on and all of the wash rinse sanitize clean buttons come on and flash when you try to start it, if you change the setting to normal or heavy duty the wash light comes on then the rinse only light comes on and all above mentioned buttons flash until the tub is drained.


Hi\015\012 \015\012Try and reset the dishwasher by unplugging it for 5-10 minutes. Now check if you are still getting the same error you can try and press the following buttons to reset it-- \015\012Saini Rinse, He ... Dishwashers

I own 2 model KUDS01FLSS1 KitchenAid Superba Dishwashers. The first unit had the clean light blinking so I read the post below and reset it. I thought everything was fine but half way during the cyc


... KitchenAid 24 in. KUDS01FLSS Built-In Dishwasher

Model #PLD4555RFC0 The control panel lights on the front are all flashing and start cancel button will not change anything. flashing Er with wash, dry, clean, and and S showing. Top controls have China/Crystal light flashing and Low rinse agent light flashing. Nothing seems to work


... Frigidaire Dishwashers

Quick Rinse light was flashing at end of cycle. Opened and closed door and pushed Start. Quick Rinse and Cancel/Drain light are now flashing and machine won't start. Turned off power supply (30 seconds) / turned on power supply and then tried again to start the dishwasher, but same problem. Control panel seems to be frozen at the Quick Rinse/Drain mode and will not cancel. Help! Thank you


Ok try this, open the door and then hit these buttons in the following combination. HI TEMP - DRY - HI TEMP - DRY...then close door and press cancel...then wait for the pump to shut down. you should be able to run a cycle after this...If this fails ... Dishwashers

I HAVE A BAUMATIC D/WASHER BHD5 TYPE DW-24E1,(ABOUT 8 YEARS OLD) IT IS A WHILE SINCE LAST USED THEN 1 NIGHT AS IF IT HAD STARTED BY IT'SELF IT STARTED MAKING A BEEPING NOISE ALL 4 INDICATING LIGHTS AS WELL AS SALT AND RINSE AID WERE FLASHING HAVE SINCE TOPPED UP SALT AND RINSE AID BUT ROUGHLY 1 MINUTE AFTER STARTING IT BEGINS TO BEEP AND ALL LIGHTS FLASH. COULD YOU TELL ME THE PROBLEM. MANY THANKS


... Baumatic Dishwashers

My Dishlex global 300's rinse light is flashing after 5 mins use. About 2 inches of water stays at the bottom of the washer. Bought this second hand and it has not been used for a few months. Do I need to fill the reservoir under the washer or lean it at 45 degrees to dislodge anything in the sump. If you have had the problem of the washer starting its program and then stopping after 5 minutes and the rinse light flashing I would appreciate your advice. Cheers Hyph


The flashing rinse light is an error code. I am assuming that your control board is good because the lights are working. I'm also assuming that this model has two pumps. One for filling and one for draining. The rinse light flashing is probably i ... Dishwashers

Hi. Our DS603I dishwasher starts on the Rinse cycle on its own - it beeps, red light flashing and no water entering the tub. It does this even if it is open. Similarly, when we try to turn it on to do a normal or heavy cycle, it starts (making quiet a loud noise) and then goes to the Rinse cycle, beeping, red light flashing, no water going into the tub. The pump wheel is turning. We can't find any blockages in the tubes. We have power-cycled it many times. Please help!


Dishwasher Repair Guide: How To Fix a Dishwasher - ACME HOW TO.com\015\012\015\012\015\012\015\012 ... Fisher DS603W / DS603B / DS603I Dishwasher

Kitchenaid KUDS25SH KitchenAid dishwasher Child Lock light flashing. Followed instructions for turning it off. Hold Energy Saver Dry button for 4 seconds. Light stays flashing. Dishwasher won't work. Cancel doesn't effect it.


Hold the button down until it beeps and the light goes off. Eric ... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

I own a kitchenaid dishwasher model KUDPO2FRSSO. The normal and cancel lights are flashing. I have tried shutting off the breaker for 20 min. Plus only to have the cancel light stop flashing but the normal light continues to flash. An


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1024 seconds