Having problems with your KitchenAid 24 in. KUDG25SH Built-in Dishwasher ?

Kitchenaid dishwasher KUDP02CRBS3 door latch keeps releasing

\015 Unit works fine so long as you prop a chair up against it to prevent the door from coming open! I did try to bend the latch a tad once to see if that would help but wasn;t impressed that it did. Do I need to replace the latch assembly? Is that a reasonable thing for a person like me to do? I have repaired a few things here and there...a clock unit in an electric oven and an element in a water heater being the most adventurous...\015

Answers :

Hi!
\015\012
\015\012You can do it yourself if you remeber all safety precautions and have the right tools. These pictures will help you---
\015\012
\015\012Door latch assembly (part #10)
\015\012
\015\012Door latch view
\015\012
\015\012Dishwasher Door
\015\012
\015\012You can buy the door latch from this link---
\015\012
\015\012Door latch assembly
\015\012
\015\012Please ask for further assistance and Do rate the solution as "FixYa" if you found it useful.

Thanks
Rylee

\015\012
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDG25SH Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

Kitchenaid dishwasher KUDP02CRBS3 door latch keeps releasing


Hi!\015\012\015\012You can do it yourself if you remeber all safety precautions and have the right tools. These pictures will help you---\015\012\015\012 ... KitchenAid 24 in. KUDG25SH Built-in Dishwasher

We need to replace the little rubber latch that keeps the dispenser door closed on our Kitchenaid dishwasher. Do we need to replace the whole detergent dispencing unit or just the latch. And if we do have to replace the whole thing, do you know how it attaches and have advice for that repair? Type is Kitchenaid KUDS01IJ


Check here ... KitchenAid Dishwashers

Kitchenaid dishwasher model kuds01fl door pops open - it appears the latch is not keeping it closed while the diswasher is operating. We push and hold it closed and it stays for a time and then pops open again - any ideas on how to fix it?? Thanks,


... KitchenAid Dishwashers

Kitchenaide dishwasher door won't open. Ran it 3 nights ago and it is holding my dishes captive. Can't open to get model # the latch is floppy and won't release. It's about 12 yrs. old. HELP!


Hello antpitypat.... When this happens, the only way to open it is to use a butter knife and gently move the latch as you pull on the latch. With a little patience and maneuvering of that floppy latch it will open. Once you do get it opened up use ... KitchenAid Dishwashers

My dishwasher is a KitchenAid Sculptura Model KUDR24SE or KUDY24SE according to my manual. I cannot open the door. The release handle seems to be loose from the latch.


... KitchenAid Dishwashers

We have a Whirlpool mod# DU1055XTVD0 dishwasher .. the blue latch designed to keep the lid to the detergent dispenser closed after filling has come loose from the inside door panel and now will not stay in place to keep the detergent lid shut. We did find a small o-ring in the bottom of the tub that apparently is part of what helps maybe hold this latch in place, but obviously there must be something else that fits inside the hole the latch goes in that keeps it secure. This


... Whirlpool Dishwashers

Myy kitchenaid dishwasher model kudi01flss doesn't start even though the lights on the panel light up so I opened up the door to look at the latch and found a broken plastic piece that appears to be part of the latch. Could this be why the machine doesn't start. The funny this is the door still seems to snap closed even with this broken piece but what I'm thinking is that this piece activates some sort of electrical connection that turns the machine on when the door is closed. Any thoughts on th


... KitchenAid KUDC25CH Dishwasher

Dacor mdw24s close door code lights keep coming on stopping dishwasher and the door is closed and latched, and problem is not the door switch or latch


The issue is the controller board seems not to be insulated and then the glue from the connector that holds the power to the board comes apart from the heat of the wash.  I removed the board, resoldered it (power cables are the black ones) and i ... Dishwashers

Kitchenaid dishwasher model# KUDC10IXWH7. Door latch on door is stuck in closed position . door willnot shut


... KitchenAid Dishwashers

Hey Everyone! Ok try this one! I have been working on a KUDS25 Kitchenaid Dishwasher. It was leaking like a siv from the bottom. I replaced both top and bottom plastic bearings and also tightend all the screws at the bottom. Leak Gone, I thought. It now has small leaks down both sides. I have since been told by the owner that he took the door apart himself. I pulled out the dishwasher from the cabinet and ran it. I could see the leaks at the top on both sides of the door latch. I cou


Hello davidgalb. You can install a new gasket to seal the door again. That old seal is not flexible any more. That said, for my time and money I recommend a replacement dishwasher, this one has definitely seen better days. Joe ... Dishwashers

I have a Kitchenaid dishwasher. Mod # KUD102CRBS1 which is hardly 2 years old. The door keeps separating from the trim and water seeps out, I fastened the trim, this took care of the problem for ca 6 month, now it is leaking again from the door, has anyone the same problem? I am steaming mad, this was an expensive appliance, which could only clean dishes somewhat with one brand of detergent, all other brands leave a gray film, and now this! MY previous dishwasher was a rel. basic GE but it got t


This is a fairly common one... I always use a silicone sealant/adhesive to make sure it stays put. A thin film does wonders. ... Dishwashers

Maytag 300 Quiet Series Dishwasher - release latch to open/close door is pushed up into "compartment" and stuck; dishwasher door will not open


Hi, I have the same exact Dishwasher, and I totally understand when you decribe the handle is stuck in the up position. When I opened mine and looked at the mechanism from the inside, there is a torsion spring that allows the lock to activate when th ... Maytag Dishwashers

KitchenAid Dishwasher KUDP01FL: Called repairman to replace balance link kit. Then door extremely stiff to open & heard loud pop when one of the ropes came off the roller. Repairman came back & put rope back on & replaced door seal, then the door won't close & he claims need a new door latch. When he left, door again extremely stiff to open & heard same loud pop when one of the ropes came off the roller. Now he says he can't fix it and to call someone else. I now have three problems: (1) The doo


May have bent door hinges,, need to check all alignment of door, hinges and latches... ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

The door release bar on our KitchenAid KUDV24SE is hanging loose and so the door won't open. According to the installation booklet, the dishwasher should be attached to the floor or countertop to prevent it falling over when the door is opened, so I can't pull it away from the counter for better access. How do I open the door from the front? Thanks.


Looks like a very tight spot to be in. Your best bet is to get the toe panel off (item 8) in ... KitchenAid 34 in. KUDV24SE Built-in Dishwasher

Kitchenaid dishwasher - door will not latch


The latch needs to be replaced. Kitchen Aid has made two updates to this latch. I.E. 2-revised latches. I just replacd the latch assembly and the dishwasher works fine now. Do a search for kitchen aid repair parts online and hav them shipped to your ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

Kitchenaid Dishwasher door wont latch


I have a brand new whisper quiet dishwasher model kudk02crbs4 I hook everthing up but the door does not lock what is worng I have no clue what wrong ... KitchenAid 24 in. KUDP02CR Built-in Dishwasher

When opening the door to my Kitchenaid Superba dishwasher, I heard a loud noise inside the machine. The door slammed open. Now, it opens, closes, and latches; however, the spring-assist that slows the opening no longer works, and the heavy door, when unlatched to open, swings freely and quickly down.


Well it sounds like you broke a spring,possably a cable you nooe to take off the bottom cover to find what broke. ... KitchenAid Dishwashers

Whirlpool DU927QWDG1 Hi, The problem I'm having with my dishwasher pertains to the door cover for the area I place the soap. There is a small spring which helps the door pop open to release the soap when washing. I cant figure out how to place the spring so that the pops open.....right now when I run the unit the door stays latched and the soap doesn't get dispensed. Any ideas on how to repair this or where I could maybe get a parts manual??? Your expertise will be greatly appreciated!!!!


... Whirlpool GU2400XTP Built-in Dishwasher

Kitchenaid model kudso3ctblo, Type 577-0 Ser. FU3202943 When the dishwasher is finished, the soap tablet is still inside the dispenser & the door is still closed. We can open the door by hand & see that the soap has not dissolved. We found a tiny spring on the floor last week. Is there a metal spring in the dispenser? Could this have broken off & now keeps the door from opening?


... Dishwashers

Kitchenaid dishwasher kude60hxss door handle wont latch


... KitchenAid KUDE60HXSS Builtin Dishwasher

We have a KitchenAid KUDS24SEBL1 dishwasher. The latch is stuck somehow and we cannot open the door. Is there a way to force the door open without breaking it?


... KitchenAid Dishwashers

Maytag built in dishwasher quiet series 200. Door closed and latch won't release to open door.


Insert flat head screwdriver in side of handle and pry out or use dinner knife(butter knife) ... Dishwashers

I have KitchenAid dishwasher KUDS01FLSSD. The sani-rinse butten keep flashing and not let me start the machine. Other buttens are not working. When I push the sani-rinse butten with cancel butten with door closed, it makes sound that water is drainning, but there isn't any water in it! I tried 'sani rinse' 'energy save dry' 'sani rinse' 'energy save dry.' didn't work. Sani Rinse keeps flashing. Help me!!!


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

I have a KitchenAid dishwasher KUDS01FLB6. The center wash arm assembly keeps falling off during the wash cycle. Two questions: 1. should the water release slots on the wash arm assembly be facing up toward the ceiling of the washer, or down toward the dishes? 2. why would the assembly keep coming loose - could the plastic connection be worn?


Yes the connection is worn or even brokenPlease rate/vote this response thanks ... Dishwashers

Dishwasher door latch stuck. wont open - KitchenAid KUDM03FT 24 in. Built-in Dishwasher


... KitchenAid KUDM03FT 24 in. Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2235 seconds