Having problems with your KitchenAid 24 in. KUDG25SH Built-in Dishwasher ?

KitchenAid KUDG25SH stopped running, won't drain. Took off upper pump housing, trying to remove 5/16 impellor mounting screw, but it won't turn even with considerable force.


Answers :

Maybe a peanut or piece of bone stuck in it. What have you been eating that may have gone thru filter trap.
\015\012Remove pump and blow back with outdoors hose - worth a try.
\015\012PS Was it a peanut?
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDG25SH Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

KitchenAid KUDG25SH stopped running, won't drain. Took off upper pump housing, trying to remove 5/16 impellor mounting screw, but it won't turn even with considerable force.


Maybe a peanut or piece of bone stuck in it. What have you been eating that may have gone thru filter trap.\015\012Remove pump and blow back with outdoors hose - worth a try.\015\012PS Was it a peanut? ... KitchenAid 24 in. KUDG25SH Built-in Dishwasher

OUR LG MODEL#6810BB WONT DO ANYTHING BUT TURN ON....FIRST, PROBLEM WAS THE DISHES WOULDNT DRY...SO THE HEATER COIL WAS REPLACED....AND THEN 2ND THE MOTOR WAS REPLACED....AND NOW IT WONT EVEN DO A THING...OTHER THAN TURN ON...


HOW OLD IS YOUR DISHWASHER? ... LG LDF6810 Built-in Dishwasher

Last night I turn on my dishwasher adl 945. It started to work but after few minutes i noticed that the dishwasher stoped and it looks like in the middle of program. Now the dishwasher wont even to turn on. Do you perhaps know what is wrong? .


... Dishwashers

F70 fault cleared the drain valve which had a "button" from the screw holes on the side of the dishwasher - still the fault comes on and the machine runs even though its not turned on. One of the sites indicated the drain pan needed to be dried out but when I took off the kick panel could not see a drain pan.


Obviously the machine believes the drain cycle is not complete. It is running the drain pump until the level it "sees" is all the way down. Somehow you or your technician will need to get inside the beautiful stainless panels to adjust, clean or re ... Miele G 2630 SCi Stainless Steel Built-in Dishwasher

North star eletric hot 2000 psi 3.5 gal per min oil pump had blown shaft seal. replaced with new pump. put small allen plug in return port. I have oil flow to the pump but none comes out port leading to burner even with shutoff switch removed and pump turning. Installed test gage 0 pressure. Took off bypass line and ran into can. pumps small amount of fuel into can that way but with uneven flow & small bubbles. nomatter what I do I just can't get fuel outlet port to burner. pump # A2VA-7116 pl


... Northstar Pressure Washers

My dishwasher keeps blinking the "clean" light and will not start. I have tried turning off the breaker to reset the machine but it still wont start even after pushing all the buttons.


... Kenmore 24 in. 16049 Built-in Dishwasher

I have purchased a repalcement detergent dispenser-assembly and do not know how to take old one out and relpace with new part. The new part has a face plate that snaps on to the screw mounted base plate assembly which attaches to the door. I need to know how to remove the old dispenser and install the new dispenser without breaking parts and scratching the door. Is there a schematic or exploded repair view I can check out or even written directions?


Hello\015\012& Welcome to FixYa\015\012\015\012To replace the detergent\015\012dispenser you can check this video. The video gives you step by step\015\012instructions:\015\012\015 ... KitchenAid 24 in. KUDP02FRSS Stainless Steel Built-in Dishwasher

My electrolux diswasher displays a code PF it wont reset even if i turn it off at the wall ??


... Electrolux Dishwashers

I have a 5 year old kenmore 665 15689 dish washer that wont come on at all . No lights no nothing . Before it stopped working the lights on the desplay were not coming on but it seamed to be washing normaly . I checked the breaker and even turned the power off for 5 min.


Theres a fuse in the back of the panel. ... Kenmore 24 in. 15689 Built-in Dishwasher

The wash cycle times seem to vary considerably , but the trouble is it runs even after the timer reaches 0 and when I stop it the dishes aren't very clean . It does this @ every setting


Hi,There could be many Reasons. Few main Reasons are as follows :-\015\012\015\012 \015\012 Water-inlet valve\015\012 \015\012 \015\012 \015\012 \015\012 ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

Wont turn off runs everytime door is closed even when switched off


... Stoves 23 in. Q60DW Built-in Dishwasher

Hi weve put a shop brand cleaner through it suds came out all over the place now it wont turn off its on drain all the time even when door is opened


... Zanussi 18 in. DCS12W Free-standing Dishwasher

Hobart AM14/1 free standing dishwasher with booster. Booster will not heat up beyond 41C. All three heating elements check ok with Ohm meter. High limit not tripped. Temperature screw up at maximum, when you turn the screw, you can hear thermostat click at lower temperature on and off. When turning on main power for dishwasher, heater in dishwasher works fine, but no relays click in the booster tank area. Have not checked for power at booster, have checked all fuses with meter and are ok. Ple


... Hobart AM14-253 Free-standing Dishwasher

ASKO dishwasher D3122 drain pump wont stop pumping and the machine wont respond when we press any of the program or start/stop buttons. the program light is flashing. We can turn the power off with the main switch on top of the door but when turning it back on the pump starts pumping again. please tell me how to fix this problem so we can get it up and running again.


... Asko D3122XLSS Stainless Steel Dishwasher

Lock wont turn off . i hold the heated dry button for more than 3 seconds and it still wont turn off. tried resetting with breaker swicth No luck


I would be more likely to believe that it is the locking solenoid.You say the light is faint, which leads me to believe that there is a high amperage draw from this locking mechanism. Remember, the locking solenoid should definitely affte ... Dishwashers

I Hve a GE profile microwave model JVM192k 004. I know there are 2 mounting screws that are in the cabinate above it but where are the rest of the mounting screws. I have a new one I want to replace it with


This is a little strange, but you have to take the grill off that goes all the way across the top front of the microwave. Now, use a slot blade screwdriver to unscrew the two metal rods that go from the front to the back mounting plate. )one on each ... GE Profile PDW9880NSS Stainless Steel Dishwasher

I have a Siemens Dishwasher. I'm not sure of the model but it is built in, has concealed controls and was purchased about 6 years ago at Best Buy. It sort of looks like the SL85. When started, it runs for a few minutes and then starts to make a horrible sound. ALmost a grinding sound but may also be like water trying to get through a small opening. The sound does not stop even after turning off the DW and even the power to it. Only turning off the water supply does it stop. Help?


... Siemens SL85A705UC 24 in. Built-in Dishwasher

Maytag Dishwasher Model #MDB7600AWB One of four plastic WHEELs mounted by screws to a 10 inch metal bar located on either side of the top rack has broken where the wheel meets the screw shaft. (These wheels run along the guide tracks for the upper rack mounted on the inside of dishwasher.) Please provide me with a part number so I can order a replacement part. Thank you.


Call Maytag with information of the tag on machine ... Maytag Dishwashers

Wont programme when turned on to what programme i want its just steames no water and the delay button wont turn off


Oh okay I see the info now- \015\012it's the temp sensor- \015\012I believe you have to replace the entire unit...\015\012go to appliance parts and distributors.com they can help with parts...\015\012do you have a manual? ... Hotpoint 24 in. FDW60 Free-standing Dishwasher

Campbell hausfeld standard duty electric pressuse washer serial 15930 water wizard .. I cannot locate the reset button and after a short while it wont turn on at all it powers off automatically. and after checking cords and plugs it wont turn on at all..


... Campbell Hausfeld 1,350 Psi Electric Pressure Washer With Auto Detail Kit #PW1350

Bosch Dishwasher SHV4313GB/17 Wont switch off ! The machine keeps running even when you open the door The pump is trying to drain water away (even though there is no water left in machine ) Have tried to reset it as instructed but to no avail. It has beeped like it has finished cycle but the pump wont switch off HELP PLEASE !


Introduction: This may work for your problem, but only if you're finding that you cannot get further water to flow into your machine. If your machine fills OK, then this ISN'T a solution to your problem. If your machine doesn't fill but your drain m ... Dishwashers

Heller HDW12 at first it wouldnt do a complete cycle, now it wont do any cycle. I can turn it on, it has power it just wont wash, it makes a noise but its not washing. The tap is turned on. Could you please help me as I live in Kalgoorlie and it takes weeks to get a plumber, and he's not cheap...probably cost me my first born!!!! regards B Hughes


... Dishwashers

Bosch she44c06uc. Like many here, changed out the garbage disposal and didn't drain. Have reset the system by holding the "Drain Cancel". No help. The cycle stops at draining. Investigated and found small piece of glass wedged in the impellor. While having the interior cover over the impellor off, the motor for the drain impellor is humming, but the impellor does not move while engaged. The impellor will rotate by hand and stops at a point at 3/4 turn. I am hoping it is not in need of a new moto


Check the center of the impeller, it should be flat on one side round on three, the impeller might be rounded out from the shaft it sits on. You might just need a new impeller. Good Luck, N let me know Thanks. jimmy ... Bosch 24 in. SHE44C02UC / SHE44C06UC / SHE44C07UC Built-in Dishwasher

I have a Kenmore model 665.15835791 dishwasher. I suspect that some plastic packaging has clogged the pump. I've removed the lower sprayer and the circular plastic cover that is held in place with 8 torx head screws. I'm trying to remove the black circular object with a 1 inch hex counterhold held in place with a screw with a 1/4 inch hex head. I have applied some torque to the screw first CCW and then CW with no results. I'm concerned about turning the head off of the screw. Which is the


... Kenmore Dishwashers

My AEG Favourit F35080vl is behaving strangely. When turned on, the lights don't light and it doesn't work, but it emits a ticking noise! After an hour or so it works (until yesterday), and is ok, unless turned off. It was inadvertently turned off at the weekend, and now ticks whenever turned on and refuses to behave normally again. We got a local repair man out who replaced the logic board at a considerable cost, and it has made no difference. He says he doesn't know what to do next! Any ideas?


Try another repaiman one who does know ... AEG 18 in. Favorit 54750Vi Slim-Line Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1195 seconds