Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

How to repair rust on lower basket of dishwasher

\015 Is there a product that can be used to cover rust on the lower basket of dishwasher.\015

Answers :

Use sandpaper or brillo pad to remove rust, and paint it with acrylic appliance paint
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

How to repair rust on lower basket of dishwasher


Use sandpaper or brillo pad to remove rust, and paint it with acrylic appliance paint ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My dishwasher lower basket has some rust. Is there paint or other solutions short of buying a new basket? Kitchenaid / kudm24sewh2


The paint dose not work well, If the wire is not in a super critical place, I sometimes cut them out and cap them with a rubber coated dishwasher repair kit that I purchase at my local appliance repair shop.\015\012You can probably order that on line ... KitchenAid 34 in. KUDP01FLSS Stainless Steel Built-in Dishwasher

I have a fisher & Pakel dishwasher and it appears to have brown a fuse inside the machine which means it does not work at all and the problem occurred during the wash cycle. This means the seal (which is a top piece that's lifted and lowered by two motors. When the seal is in the lowered position it creates a complete seal but it also locks the drawer (single drawer dishwasher) so it cannot be pulled out. I repaired the dishwasher two years ago. One of the lifter motors didn't work. I replaced t


According to the service manual there is no problem in manually forcing open the drawer in the situation where the power has failed part way through the diswasher cycle.\015\012\015\012The problem is that once you force the lid open, you ... Fisher and Paykel Dishwashers

Both of the baskets are rusting and even several of the rungs have completely rusted off. This dishwasher was installed in 2003, 6 years old. Has anyone else had the same type of problem with this model? What happened to dishwashers lasting for 10-15 years? Where is the Maytag quality?


The problem is most likely due to minerals or other impurities in your water. The nylon coating covering the metal dish baskets erodes quickly from contact with this water. It is also exacerbated by the wayers high temperatures. ... Dishwashers

Need a new lower basket for my kenmore ultra wash dishwasher 665.15625691


... Dishwashers

I purchased a replacement lower dishwasher basket for a DU8500XB-0 Whirlpool. The replacement part is W10311986. The part fits washer as far as rolling in and out, but there are 4 extra parts that I don't know how they fit, no paper work with the part from FSP. Basket probably fits more than one machine. Would like to know how the extra parts fit the basket. Thanks


Did you get a response to your question? I have the same question. ... Whirlpool W10311986 DISHRACK

DISHWASHER NOISE I HAVE A HOTPOINT DISHWASHER MODEL HDA3420Z02BB SERIAL # TT813162Y. IT IS ABOUT 10 YEARS OLD AND JUST TONIGHT DEVELOPED A CLICKING/ GRINDING NOISE AT THE BOTTOM OF THE DISHWASHER. I REMOVED THE LOWER COVERS AND IT APPEARS TO BE COMONG FROM THE MOTOR AREA OR I GUESS THAT IS THE PUMP ATTACHED TO IT. JUST WONDERED IF THERE IS A PATTERN FAILURE WITH THIS MODEL AND IF SO IS IT FAIRLY EASY REPAIRED?


A noise could be created by something getting down into the motor-pump assembly piece of glass, piece of bone, wire tie anything really. If this is the case and you can remove it before it causes further damage problem solved. At ten years old the ... Hotpoint 24 in. HDA3400G Built-in Dishwasher

Lower arm repair on Dishwasher?


It will help if you can provide the model number of the kenmore dishwasher. I would try and take the wash arms out and clean them under running tap water. If the residue continues to appear then confirm if the problem is only with the bottom drawer o ... Kenmore Dishwashers

The slide on the upper basket keeps falling out. It's been fixed twice but doesn't hold. The second repair man who put the slide back in the rollers said he couldn't see anything wrong with it, but it still didn't hold, so he called your tech dept. who said they had roller and slide kits at a total cost of $66 for this model. The slide kit had a new part number but the tech department didn't tell the repair man why they'd changed the part. The roller kit was one for dishwashers the sides o


One option is installing stainless steel washers on the rack supports that screw into the side of the tub. The rack falls down because there is too much "slop" with the rack...a couple small washers to space them tighter normally does the trick. ... Frigidaire 24 in. PLD2850 Built-in Dishwasher

Our Maytag dishwasher, mod MDB9150AWS, has abad lower rack due to rust and prongs coming loose. Maytag sent me a replacement BUT without the center spray tower. It looks like trouble to remove the old one and install it in the new lower rack. Any help would be appreciated.


Yes, I resolved the problem after thoroughly studying the assembly. It was relatively simple; all I had to do was turn the spray tower 90 degrees and it came free of the rack.\015\012\015\012Thanks for the web site, nonetheless. ... Dishwashers

Upper and lower racks of Beaumark dishwasher purchased in mid-1990s (model and serial number available) need replacing. Coating on metal racks has worn away and resulting rust is getting on dishes. Replacement racks (new) cost more than the dishwasher itself (figure that!). Can anybody help out with a suggestion?


... Dishwashers

My sears kenmore dishwasher model #665 is not getting my dishes clean. I took out the lower basket and discovered that the lower spray arm and the housing it sits on is very loose an wobbeling. How can I fix this?? There is a center knob, but it does not seem to be able to tighten down. What is wrong?


... Kenmore 15762 Dishwasher

The door of our Eurotech Dishwasher EDW 254 E when opened and released just suddenly "drops" down uncontrolled. Apparently the "spring" the right lower corner broke. Also, it does only poor, unacceptably thorough cleaning job now. Will you please dispatch a repair person or suggest names and addresses / tel. nos. / e-mail addresses of repair persons / shops that can fix it. If spare parts are needed please indicate the source(s) for them. Possibly send us via e-mail a copy of the manual for t


Hi.Problem is likely the door hinge springs, hinges, stoppers or other part comprised in the door hinge assembly.See parts B ... EuroTech 23 in. EDW254E Built-in Dishwasher

Need a new rack upper and lower for dishwasher M odel #GLDB958AS2 . Both the upper and lower racks are rusted and breaking apart. purchased in 2003


... Frigidaire Dishwashers

Bosch Dishwasher The lower drawer of my dishwasher does not drain when I use it...I have checked the small drain basket and it is not clogged....I have just sold my home and I am concerned for the next owner. How long is the warranty on these appliances....it came with my unit 2 years ago and I have been the only user. Would it still be under warranty? Thank You Paul


Most appliances have a one year parts and labor warranty some are varied or graduated. You can find out in the warranty section of your owners manual or the website of the brand of dishwasher you have you can find user guide /owners manuel there. It ... Bosch 24 in. SHU43 Built-in Dishwasher

Rollers fell off my lower basket of my dishwasher. Need to get a new basket for bottom.


Hi,\012That is not that hard to fix and you can easily buy the parts yourself online...Here is a tip that will help you with the online buying...How to Buy ... GE Nautilus 24" Built-in Dishwasher

I have a built under de dietrich dishwasher approx 4 years old and out of warranty. The various numbers on the identification are 1) 02062A 2) V29996U1/1 3) 36VLDHGB1 4) 9 44 02319. The drop down door has lost it's tension from the hinge/hinges,and crashes down when opened. I have to hold and lower it down when opening. Can this be repaired or do I need a new dishwasher? May Mc Pherson


... De Dietrich Dishwashers

I have taken lower basket out and don't know how to fit rollers back into dishwasher


... Tricity Bendix 18 in. DH090 Free-standing Dishwasher

We have an LG dishwasher LD14AT1 P/No 3850ED3005R. It kept signalling an error to do with a leak- all hoses etc were checked, one relaced but no fault was found, so we had a repair man come out and he repalced the electronic board at a cost of $200.00. The error still kept signalling (by the dinging sound). It was then discovered that the appliance had rusted and there was in fact a leak in the base of the machine, not a fault in the electronics. The machine has just remained idle since. I belie


I agree that it should not leak like it is dowing. Is it really rusted/corroded? Or is there a whole?The tech should have seen the leak with ease. Replacing the PCB was uncalled for.Regarding the leak, I would gather the pr ... LG Dishwashers

I am searching for new upper and lower baskets of an old model of Ariston dishwasher. The model number is S LS 66 ES Could you please tell me if they are available and how much they cost? Please reply.


... Ariston Technologies Dishwashers

The lower shelf/drawer in the dishwasher has rusting pieces mostly at joins and also has upright pieces breaking off. Also a couple of small pieces have broken off the top shelf/drawer. I need to replace both shelves/drawers. how do i order replacement parts and at what cost. pat


Hi,\015\012\015\012you'd have to start by providing a make and model & serial number. Check out repairclinic.com, amresupply.com or searspartsdirect.com to name a few, but there are many more on-line appliance part vendors if you do a search with you ... Asko D1876 Dishwasher

We need new wheels for our lower basket - Asko D1776 Built-in Dishwasher


Hi,\015\012\015\012Welcome to "Fixya" ! You can find these lower rack support roller & clip assemblies at "repairclinic.com" for around $10ea.\015\012Their part number is 1156665. They are really easy to change as you may already know, they snap in p ... Asko D1776 Built-in Dishwasher

I followed 'Mindcell's' advice on fixing my Kenmore QuietGuard 4 dishwasher, and I managed to clear out all the food particles that have accumulated. I suspect that is probably why the middle spray arm has not been very effective. However, in my repair, as I was screwing in the star screw that holds the cover of the foodscreen (the lower most star screw), I managed to overturn it and break it. Thus, the food screen is only held by a plastic clip, and from what I can gather, pressure from a


Hello Lily - You could use the machine this way, afterall all that could happen is for the cover to come loose and end up in the bottom of the machine.\015\012\015\012That said, why not remove that broken screw with a small pair of vise g ... Kenmore 24 in. 15689 Built-in Dishwasher

Rusty racks The racks of my Maytag MDB4050AWW sn 15638404SZ are all rusting, both uppet and lower. as I am looking to sell my house this is a problem. I would expect the racks to last as long as the dishwaher, I am a single person, so the dishwasher is not used a lot. Jean Whalen


Check your warranty to see if it covers your racks. Some models have a longer warranty against rack rusting if you have Duraguard racks. If they are Dura guard racks and still under warranty, Maytag will replace them at no charge. ... Maytag MDB7100AWB Dishwasher

There are some worn, rusty spots on the lower basket of our Magtag. These are small spots where the plates rest against the tines. Are there any products to repair the plastic finish?


You can buy tine caps and repair goop at an appliance repair shop, however once rust has penetrated it is generally hard to stop ... Dishwashers
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1361 seconds