Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

No heat in Kitchenaid dishwasher kudi01fl

\015 Hi, I have the KUDI01FLWH0 dishwasher, stainless tub. I am trying to diagnose the lack of heating problem but have lost the tech sheet. Does anyone have the tech sheet, pictures or thoughts on which direction to start the diagnosis and continuity checks? The water going into the dishwasher is 118 degrees (just about ideal). I have measured the water temp occasionally during cycles and it stays at a constant 90 degrees in all the cycles. I don't think it's the thermister because the cycle completes every time (I don't have blinking lights). I have reset the module (keypad sequence) and now the water remains at 90 degrees (so there could be partial heat) whereas before it was cold to the touch. Please help.\015

Answers :

Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

No heat in Kitchenaid dishwasher kudi01fl


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Kitchenaid dishwasher not heating up - KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher


Can you check the near the swiches? this is located on the top of the door, you may have to remove the inside plastic covering. The switches get durty from steamed debre, or may have a connector pulled apart from the door being opened, and closed m ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

No power to kitchenaid dishwasher w10311123b - KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

No power to kitchenaid dishwasher kudi01ss - KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

Replacing heating element in Kitchenaid dishwasher KUDI01TJBL0


... KitchenAid KUDI01TBK Dishwasher

My dishwasher emits a dead animal smell immediately after filling. I have a 20-year-old KitchenAid KUDS220T3 dishwasher. The racks are a little corroded, but it still cleans dishes just fine. About two months ago, it started smelling like a dead animal immediately after the dishwasher fills with hot water, during the time the water is being heated, but before agitation begins. The smell appears to be coming from around the door. If I open the door, everything inside the dishwasher smells fine.


This vent that you are describing is to allow air to flow in for the heat/dry cycle. Some times little creatures want to "mark" their territory by "spraying". Spray some type of cleaner like ammonia into it and **** it out with vacuum a few times. Mo ... KitchenAid Dishwashers

Kitchenaid KUDM25SH dishwasher - water not heating


... KitchenAid 24 in. KUDS25SH Built-in Dishwasher

KitchenAid KUDP01DLBS2 dishwasher. Runs for a very long time on any cycle; time does not seem to advance. (takes 2.5 hours or more for normal cycle. "sensing soak", "water heating" lights on for a long time, even though it appears that water is not being heated. Checked incoming water temp, is hot. Did not do this when new, something has changed. Typical cycle was 1 hr 10 min. before.


Sounds like the heater inside the dishwasher is not working. The machine is trying to get the water up to a preset temperature, probably in the neighborhood of 140 degrees. That is one of the things that it is sensing.After the machine fi ... Dishwashers

My kitchenaid dishwasher leaves a white residue on clean dishes. 4 year old appliance, worked great until 6 months ago. under warranty, service repairman said i was using too much soap( am not). he cleaned it with salt and vinegar stating i had lots of suds when he ran a rinse cycle. i always use jet dry and don't use the heat drying cycle. it didn't improve. i tried different soaps, more vinegar, and finally bought a special product to clean the dishwasher. the inside is stainless steel, very c


Hi,The scum, film and white residueproblems have started since the reductionof phosphates in dishwasher detergents.Here is a tip that will help you to solve the problem of films, residue, and scum in your dish ... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

KitchenAid dishwasher, Model # KUDP021RBS1 - "Normal and cancel lights blink constantly". I had this same problem about two weeks ago so I googled your site and though the solution I found was not exactly applicable to my problem but I tried and that is - Press high Temp, heated dry, high temp and then heated dry and then cancel button and then close the door. Would you believe it worked like a magic wand. But this same problem resurfaced and I am trying all those old tricks but nothing is worki


... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Heat is coming from dishwasher at all times. - KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDM01TJ - Multiple Color Built-in Dishwasher

Kitchen aid dishwasher cancel light blinking - KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher


... KitchenAid 24 in. KUDI01FL - Multiple Color Built-in Dishwasher

I need to replace the heating element and electronic control board on my Kitchenaid KUDS01DL Dishwasher. I have the parts. I have been able to find directions on how to replace the heating element, but am not finding anything on the electronic control board. I don't even know where this part goes. I am guessing somewhere in the door, but can't find any instructions. Help...


... KitchenAid 24 in. KUDS01DLSS Built-in Dishwasher

Kitchenaide dishwasher #KUDP02CRBS2 --- all lights on the panel are lit up. I pressed the sequence "sani rinse - heat dry- sani rinse - heat dry". What now? Thanks in advance


... KitchenAid 24 in. KUDP02CRBS Stainless Steel Built-in Dishwasher

My kitchenaid dishwasher model kudpo2frsso built in lights are flashing normal and cancel I shut off the breaker for 20 minutes pressed Normal heat dry X2 Then cancel x2 but to no avail. Any suggestions its the day before Thanksgiving HelpI T The Normal and Cancel lights are flashing simutanuously and the dishwasher is not working at all


... KitchenAid 24 in. KUDS01FLBL Built-in Dishwasher

I have KitchenAid dishwasher model kudmoitjbso. The bottom sprayer works but the upper tray and top of unit sprayers do not. Any suggestion as to the problem and fix? Another problem is heating coil doesn't heat. If something needs to be replaced/repaired, can I do it? Where do i get parts reasonably priced?


... KitchenAid 24 in. KUDI01TJ - Multiple Color Built-in Dishwasher

My kitchenaid dishwasher will not complete a washing cycle. the water heating seems to be staying on all the time. could my heating element be shot. the water seems hot when i open the dish washer during the cycle but it is connected to the hot water supply line. thanks


... KitchenAid Dishwashers

I have a Kitchenaid dishwasher, model KUDI01FLSS5. When I start the dishwasher, it wills with water, then gives out a low buzzing sound, and that is about all. The water heats up, and eventually drains out, but nothing more. What can be the problem?


Hi\015\012\015\012 \015\012\015\012If it fills with water as it was filling earlier and the\015\012quantity is fine then the issue is either with the ... Dishwashers

My kitchenaid dishwasher quit working, the hi temp scrub and heat dry buttons light up but nothing else does. The dishwasher makes no sounds and doesn't even try to turn on so I tried bypassing the thermal fuse, safety latch, and replaced the motherboard so to speak and still nothing so PLEASE HELP!?!


... Dishwashers

Kitchenaid superba dishwasher model KUDS011JWH0 heating element


... Dishwashers

KitchenAid dishwasher kuds30fxbl0 won't heat dry. Just shuts off and I don't get the "Clean" green light. What could this be?


... Dishwashers

Kitchenaid dishwasher heating element


... Dishwashers

How do i remove heating element kitchenaid dishwasher #8270140


... Dishwashers

Heated dry light flashing - KitchenAid Dishwashers


... KitchenAid Dishwashers

My kitchenaid KUDI01DL dishwasher began making a lot of noise while running, then subsequently decided not to circulate the water around to wash the dishes. It sounds like the motor is running (maybe) but there is no washing action going on. The machine will fill, drain and heat the water but nothing else. Is it likely that the pump/motor assembly has ceased to function properly? thanks...


The problem is very likely in the chopper and/or somewhat possible in the impeller. The chopper is replaceable from the front. Disassemble the pump, the chopper will be on its left side under a cover. That cover is kinda tricky to remove (remove all ... KitchenAid 24 in. KUDI01DL - Multiple Color Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.1313 seconds