Having problems with your KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher ?

Kitchen Aid Dishwasher Model # KUDS01FLSS2. No NORMAL Light?

\015 The "Normal" light indicator on the control panel is not lit up nor can I use this cycle option for washing dishes anymore. However, I can use other cycles, such as "baked on cookware" or Light china". Both these cycle indicators are lit and working fine. This all happened about two weeks ago and I'm wondering it it happened while doing a back splash remodel in the kitchen. The power was shut on and off a time or two and trial and error was used when determining what circuit belonged to what appliances. The only thing I have done to rectify the problem thus far is reset its circuit breaker for twenty minutes. No luck though? I'm now searching boards for any help that someone maybe able to offer. If you need any additional info, please don't hesitate to contact me. Thanks for reading and I look forward to implementing any ideas you might have. Best Regards. Todd\015

Answers :

Good day,
hope this link below will solve your problem.

kitchen appliances
Repair Help & Product Troubleshooting for KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Tips for a great answer:

- Provide details, support with references or personal experience .
- If you need clarification, ask it in the comment box .
- It's 100% free, no registration required.

Suggested Questions/Answers :

I have a Kitchen Aid dishwasher Model KUD1021RWH1 that is malfunctioning. The display has the Heavy Duty, Normal and Cancel lights all flashing on and off at the same time. This problem has been intermitent. The happens after we fill the washer and want it to start. I push the Normal button and the heavy duty button flashes with the normal button and the dishwasher wont start. So, I push the cancel button and it flashes also.The washer has been cycling fine since we bought it a few years ago unt


... KitchenAid 24 in. KUDI02IR Built-in Dishwasher

Kitchen Aid Dishwasher Model # KUDS01FLSS2. No NORMAL Light?


Good day,hope this link below will solve your problem.kitchen appliances ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

We have a Kitchen Aid model# KUDP02IRBS1 serial# FT1404764 The dishwasher will not work and the "Normal" light is flashing. We have had the control panel replaced once already with this similar problem and it worked for a while. Any suggestions? Thanks for you help!


... KitchenAid 24 in. KUDP02IRBS Stainless Steel Built-in Dishwasher

My kitchen aid dishwasher model KUDU03FTSS0 normal wash light is keep blinking. Controal panel is freezed none of the keys are working , not able to sart a wash cycle


... KitchenAid Dishwashers

Kitchen Aid Dishwasher - model: KUDPO2CRBLOrn Ran the dishwasher twice on pots/pans cycle and sani rinse with a special cleaner recommended due to build up and items not getting clean. (soap left all over them) Cleaned machine out great! Now, the only choices that will light are "quick clean up" and "rinse only." Even if I choose them, when I hit the "start" button - the machine will not start. No other lights will light. Machine will not start. Any ideas?? Thank you!!!


... KitchenAid Dishwashers

My kitchen aid dishwasher will not start I replaced the interface control board thinking that was the obvious problem. When you go to set the dishwasher to start some of the settings don't always light up then when you push the start button the lights will flash then start but it's not flashing and won't start. I get lucky once in a while and get it to flash then start. I don't know where else to look. I don't want to start replacing parts one at a time till I get lucky. My model # is KUDIO1F


Check all cables especially the ribbon cables from the user interface to the electronic control assembly as steam from dishwashings will create small amounts of corrosion and inhibit signals to and from these 2 components,unplug each,inspect,and reco ... KitchenAid Dishwashers

I have a Kitchen aide dishwasher Model KUDI01ILWH6 that will not turn on..there is a control lock light on and I have tried pushing the cancel button but all that happens is the control lock light flashes 3 times and the dishwasher still wont turn on....Please , how to I disengage the control lock


... KitchenAid Dishwashers

Cancel Light Flashing on Kitchen Aid Dishwasher


I found this post elsewhere. It seems to have worked for me:\015\012Our KitchenAid KUDP series dishwasher went into a mode where it would\015\012not start and would only respond to the cancel/drain button. The clean\015\012light would flash 7 times i ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

My Kitchen Aid Model KUDPO1FLSS5 dishwasher does not turn on. The lights all light up when selected. When I press start it used to blink all the lights and begin to run. Now, none of the lights blink and the cycle never starts.


... Dishwashers

Dishwasher does not seem to have power. I have a Kitchen Aid, under counter unit, 9 years old, model KUDS01I. I used it 2 nights ago with no problem. When I push a button, nothing happens, no lights show, etc. It is plugged into the lower half of a duplex socket with disposal plugged into the top. Disposal works, so the problem seems to be with the dishwasher. That also eliminates any issues related to breakers or ground fault indicators, etc. Is there a reset button on the dishwasher? Is there


... KitchenAid Dishwashers

I have a kitchen aid dishwasher model # KUDM01TJWHO The clean light has a 7 code. Your link to diagnostic mode/reset didn't work for this model. The tech sheet isn't behind the kick plate nor door panel. Need more suggestions do you have a tech sheet for this model?


You need to see if your getting power from the control all the way to the heating element something in the heating system is not working. some times the element burnes out and takes out the other stuff with it, so check for continuity at the element ... KitchenAid Dishwashers

Kitchen Aid Dishwasher Model # KUDM01TJBTO. The unit will drain with the motor, but it will not start. Some of the panel lights will light but not all. The control panel light can also be activated or unlocked.


... KitchenAid Dishwashers

Kitchen Aid superba the green normal cycle light keeps flashing


... KitchenAid Dishwashers

Cancel Light Flashing on Kitchen Aid Dishwasher


I ran into this same problem. Cutting the power didnt reset it.After power reset, mine had the normal led blinking. If I pressed cancel, then the cancel and china button leds would start blinking too.I pulled out the trouble s ... KitchenAid 24 in. KUDI01FLSS Stainless Steel Built-in Dishwasher

Kitchen Aid dishwasher Model# KUDP01FLSS. 2 problems #1 Won't run unless you press in on the door and hold it for a few minutes then it runs through cycle normally. Problem #2 It won't drain water out at the end of the cycle when I open the door there is water laying in the bottom of the tub. I have checked the drain hose for clogging and it appears normal. I am able to remove the hose from the disposal and suck the water out of the tub using a shop vac this indicates to me that the drain is ope


... Dishwashers

None of the lights will light up on my kitchen aid dishwasher model KUDS301XWH 4. What is the reset sequence? It does not have an


... KitchenAid Dishwashers

My Kitchen Aid Dishwasher Model #8573030 won't start. The start light keeps blinking and the cancel light doesn't work.


... KitchenAid Dishwashers

Kitchen Aid KUDS01DJSS0 dishwasher is stuck in light china mode, can not change mode to normal, heavy, etc... Also can not enable energy saver or sani clean. Is there a way to reset the dishwasher of diagnos the bad part?


... KitchenAid Dishwashers

Kitchen Aid Dishwasher model # KUDK03CTSS3 The control panel lights are blinking rapidly, several of them. Nothing works, even after powering off and on again. I see there are instructions to reset the control panel on these before calling for service. How do I reset the panel on this model?


... Dishwashers

Hello, I have a Kitchen Aid (model # KUDMO1T JWHO) dishwasher that runs the motor in all cycles, with water fill & drain working fine, but the pump is not pumping water during any cycle, as the spinners and the inside of the washer are dry when I open the door, except for the water sitting in the bottom. Also, no normal swishing sound of water when the motor runs in any cycle. Looks to me like a mechanical break in the pump drive. How do I check the pump drive on this model? Do you have any


... KitchenAid Dishwashers

My kitchen aid dishwasher (8573025) "normal", "light china", "and "cancel" buttons are blinking. I can't get them to stop blinking and cannot get the dishwasher to start .


... KitchenAid Dishwashers

I have a Kitchen Aid Dishwasher Model KUDC10IXWHO that the touch pad does not light up or will fuction


... Dishwashers

I have a kitchen aid dishwasher 11mo old model kuds30. Blue lights stay on after cycle is complete. Is this a control panel going bad?


... KitchenAid Dishwashers

Kitchen aid dishwashers model kudi1o1ilbl6 won't function. Cancel light flashes 7 times pauses and flashes 7 times repeat for ever. killing the power did not reset. Advice?


Open door, press in rapid sequence the following keys: hi temp scrub, energy saver dry, hi temp scrub, energy saver dry. Close the door until it latches, then open it and depress the cancel key. The lght should clear. It's a beautiful thing. ... KitchenAid 24 in. KUDS25 Built-in Dishwasher

The wash light and the start/cancel button keep flashing. How do I fix it? I have a Kitchen Aide dishwasher model KUDS02FR


Hi,\015\012The clean light usually will blink due to a failure to heat the water properly. This dishwas ... KitchenAid 24 in. KUDS02FRSS Stainless Steel Built-in Dishwasher
  • Start your question with What, Why, How, When, etc. and end with a "?"
  • Be clear and specific
  • Use proper spelling and grammar
all rights reserved to the respective owners || www.a-wash.org || Terms of Use || Contact || Privacy Policy
Load time: 0.2346 seconds